IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v11y2019i20p5652-d276164.html
   My bibliography  Save this article

Nonuniform Woven Solar Shading Screens: Shading, Mechanical, and Daylighting Performance

Author

Listed:
  • Yao Lu

    (Faculty of Architecture, South China University of Technology, Guangzhou 510640, China)

  • Hankun Lin

    (Faculty of Architecture, South China University of Technology, Guangzhou 510640, China)

  • Siwei Liu

    (Faculty of Architecture, South China University of Technology, Guangzhou 510640, China)

  • Yiqiang Xiao

    (Faculty of Architecture, South China University of Technology, Guangzhou 510640, China)

Abstract

This study investigated the potential of using a nonuniform woven panel with nonuniform strips—thick sticks and thin battens—as an external solar shading screen that addressed daylighting, shading, and mechanical performance factors. The sustainable material, namely, bamboo, was used as the demonstration material for the screen. An on-site experiment and ANSYS simulation were carried out to investigate the basic solar optical performance and structural strength of the proposed screen, respectively. Then, a series of daylighting simulations were conducted to optimize the configuration of the screen. The results showed that the nonuniform woven solar shading screen reduced up to 80.3% of the solar radiation gain in a room during summer months while ensuring a relatively even distribution of useful daylight during the year. Moreover, the screen effectively reduced the negative impact of glare to a level below “imperceptible” and enabled a relatively clear view through the window and shading. Regarding the structural strength, the screen with a size smaller than or equal to 1 × 1 m withstood a wind load of 12 m/s. Furthermore, this study proposed two optimal configurations: a screen woven of square sticks and battens with a distance of 10 mm between them, and a screen woven of round sticks and battens with a distance of 8 mm between them. This study illustrated the superiority of the nonuniform woven solar shading screens, which supports a wider application of solar shading screens made of other materials with similar structures and reflectance values.

Suggested Citation

  • Yao Lu & Hankun Lin & Siwei Liu & Yiqiang Xiao, 2019. "Nonuniform Woven Solar Shading Screens: Shading, Mechanical, and Daylighting Performance," Sustainability, MDPI, vol. 11(20), pages 1-19, October.
    • Handle: RePEc:gam:jsusta:v:11:y:2019:i:20:p:5652-:d:276164
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/11/20/5652/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/11/20/5652/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Edwin Zea Escamilla & Guillaume Habert & Juan Francisco Correal Daza & Hector F. Archilla & Juan Sebastian Echeverry Fernández & David Trujillo, 2018. "Industrial or Traditional Bamboo Construction? Comparative Life Cycle Assessment (LCA) of Bamboo-Based Buildings," Sustainability, MDPI, vol. 10(9), pages 1-14, August.
    2. Byungyun Lee, 2019. "Heating, Cooling, and Lighting Energy Demand Simulation Analysis of Kinetic Shading Devices with Automatic Dimming Control for Asian Countries," Sustainability, MDPI, vol. 11(5), pages 1-20, February.
    3. Cristina Carletti & Fabio Sciurpi & Leone Pierangioli, 2014. "The Energy Upgrading of Existing Buildings: Window and Shading Device Typologies for Energy Efficiency Refurbishment," Sustainability, MDPI, vol. 6(8), pages 1-24, August.
    4. Kirimtat, Ayca & Koyunbaba, Basak Kundakci & Chatzikonstantinou, Ioannis & Sariyildiz, Sevil, 2016. "Review of simulation modeling for shading devices in buildings," Renewable and Sustainable Energy Reviews, Elsevier, vol. 53(C), pages 23-49.
    5. Giacomo Chiesa & Andrea Acquaviva & Mario Grosso & Lorenzo Bottaccioli & Maurizio Floridia & Edoardo Pristeri & Edoardo Maria Sanna, 2019. "Parametric Optimization of Window-to-Wall Ratio for Passive Buildings Adopting A Scripting Methodology to Dynamic-Energy Simulation," Sustainability, MDPI, vol. 11(11), pages 1-30, May.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Zhiqiang Wang & Qi Tian & Jie Jia, 2021. "Numerical Study on Performance Optimization of an Energy-Saving Insulated Window," Sustainability, MDPI, vol. 13(2), pages 1-25, January.
    2. Jungwon Yoon & Sanghyun Bae, 2020. "Performance Evaluation and Design of Thermo-Responsive SMP Shading Prototypes," Sustainability, MDPI, vol. 12(11), pages 1-35, May.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Carmen María Calama-González & Rafael Suárez & Ángel Luis León-Rodríguez, 2018. "Thermal and Lighting Consumption Savings in Classrooms Retrofitted with Shading Devices in a Hot Climate," Energies, MDPI, vol. 11(10), pages 1-17, October.
    2. Carmen María Calama-González & Ángel Luis León-Rodríguez & Rafael Suárez, 2018. "Daylighting and Energy Performance Evaluation of an Egg-Crate Device for Hospital Building Retrofitting in a Mediterranean Climate," Sustainability, MDPI, vol. 10(8), pages 1-17, August.
    3. Abdelhakim Mesloub & Aritra Ghosh & Mabrouk Touahmia & Ghazy Abdullah Albaqawy & Emad Noaime & Badr M. Alsolami, 2020. "Performance Analysis of Photovoltaic Integrated Shading Devices (PVSDs) and Semi-Transparent Photovoltaic (STPV) Devices Retrofitted to a Prototype Office Building in a Hot Desert Climate," Sustainability, MDPI, vol. 12(23), pages 1-17, December.
    4. Cho, Hyun Mi & Yang, Sungwoong & Wi, Seunghwan & Chang, Seong Jin & Kim, Sumin, 2020. "Hygrothermal and energy retrofit planning of masonry façade historic building used as museum and office: A cultural properties case study," Energy, Elsevier, vol. 201(C).
    5. Sara Brito-Coimbra & Daniel Aelenei & Maria Gloria Gomes & Antonio Moret Rodrigues, 2021. "Building Façade Retrofit with Solar Passive Technologies: A Literature Review," Energies, MDPI, vol. 14(6), pages 1-18, March.
    6. Jungwon Yoon & Sanghyun Bae, 2020. "Performance Evaluation and Design of Thermo-Responsive SMP Shading Prototypes," Sustainability, MDPI, vol. 12(11), pages 1-35, May.
    7. Pajek, Luka & Košir, Mitja, 2021. "Strategy for achieving long-term energy efficiency of European single-family buildings through passive climate adaptation," Applied Energy, Elsevier, vol. 297(C).
    8. Liyin Shen & Junsi Yang & Rong Zhang & Changzhuan Shao & Xiangnan Song, 2019. "The Benefits and Barriers for Promoting Bamboo as a Green Building Material in China—An Integrative Analysis," Sustainability, MDPI, vol. 11(9), pages 1-23, April.
    9. Hassan Bazazzadeh & Barbara Świt-Jankowska & Nasim Fazeli & Adam Nadolny & Behnaz Safar ali najar & Seyedeh sara Hashemi safaei & Mohammadjavad Mahdavinejad, 2021. "Efficient Shading Device as an Important Part of Daylightophil Architecture; a Designerly Framework of High-Performance Architecture for an Office Building in Tehran," Energies, MDPI, vol. 14(24), pages 1-26, December.
    10. Anna Laura Pisello, 2015. "Experimental Analysis of Cool Traditional Solar Shading Systems for Residential Buildings," Energies, MDPI, vol. 8(3), pages 1-14, March.
    11. Mamdooh Alwetaishi & Omrane Benjeddou, 2021. "Impact of Window to Wall Ratio on Energy Loads in Hot Regions: A Study of Building Energy Performance," Energies, MDPI, vol. 14(4), pages 1-15, February.
    12. ChungYeon Won & SangTae No & Qamar Alhadidi, 2019. "Factors Affecting Energy Performance of Large-Scale Office Buildings: Analysis of Benchmarking Data from New York City and Chicago," Energies, MDPI, vol. 12(24), pages 1-17, December.
    13. Han Yang & Koki Kikuta & Motoya Hayashi, 2022. "Research on Carbon Reduction of Residential Buildings in Severe Cold Regions Based on Renovation of Envelopes," Energies, MDPI, vol. 15(5), pages 1-19, March.
    14. Zhuyuan Xue & Hongbo Liu & Qinxiao Zhang & Jingxin Wang & Jilin Fan & Xia Zhou, 2019. "The Impact Assessment of Campus Buildings Based on a Life Cycle Assessment–Life Cycle Cost Integrated Model," Sustainability, MDPI, vol. 12(1), pages 1-24, December.
    15. Dong-Seok Lee & Jae-Hun Jo & Sung-Han Koo & Byung-Yun Lee, 2015. "Development of Climate Indices Using Local Weather Data for Shading Design," Sustainability, MDPI, vol. 7(2), pages 1-16, February.
    16. Marchini, F. & Chiatti, C. & Fabiani, C. & Pisello, A.L., 2023. "Development of an innovative translucent–photoluminescent coating for smart windows applications: An experimental and numerical investigation," Renewable and Sustainable Energy Reviews, Elsevier, vol. 184(C).
    17. Cristina Carletti & Leone Pierangioli & Fabio Sciurpi & Andrea Salvietti, 2018. "Comparison among Detailed and Simplified Calculation Methods for Thermal and Energy Assessment of the Building Envelope and the Shadings of a New Wooden nZEB House," Sustainability, MDPI, vol. 10(2), pages 1-21, February.
    18. Bustamante, Waldo & Uribe, Daniel & Vera, Sergio & Molina, Germán, 2017. "An integrated thermal and lighting simulation tool to support the design process of complex fenestration systems for office buildings," Applied Energy, Elsevier, vol. 198(C), pages 36-48.
    19. Giacomo Chiesa & Francesca Fasano & Paolo Grasso, 2021. "A New Tool for Building Energy Optimization: First Round of Successful Dynamic Model Simulations," Energies, MDPI, vol. 14(19), pages 1-20, October.
    20. Noor Muhammad Abd Rahman & Lim Chin Haw & Ahmad Fazlizan, 2021. "A Literature Review of Naturally Ventilated Public Hospital Wards in Tropical Climate Countries for Thermal Comfort and Energy Saving Improvements," Energies, MDPI, vol. 14(2), pages 1-22, January.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:11:y:2019:i:20:p:5652-:d:276164. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.