IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v18y2025i3p720-d1583501.html
   My bibliography  Save this article

A Novel Optical Instrument for On-Line Measurement of Particle Size Distribution—Application to Clean Coal Technologies

Author

Listed:
  • Mao Cheng

    (Department of Energy, Environmental and Chemical Engineering, Consortium for Clean Coal Utilization, Washington University in St. Louis, One Brookings Drive, St. Louis, MO 63130, USA)

  • Zachariah Wargel

    (Department of Energy, Environmental and Chemical Engineering, Consortium for Clean Coal Utilization, Washington University in St. Louis, One Brookings Drive, St. Louis, MO 63130, USA)

  • Duarte Magalhaes

    (Department of Energy, Environmental and Chemical Engineering, Consortium for Clean Coal Utilization, Washington University in St. Louis, One Brookings Drive, St. Louis, MO 63130, USA)

  • Richard Axelbaum

    (Department of Energy, Environmental and Chemical Engineering, Consortium for Clean Coal Utilization, Washington University in St. Louis, One Brookings Drive, St. Louis, MO 63130, USA)

Abstract

A flow cell is a critical measurement interface for many optical instruments. However, the flows are often sampled under harsh conditions, such as under high pressure and/or high temperature, in the presence of particles, moisture, vapors with high dew points or corrosive gases. Therefore, obtaining a high-optical-quality flow cell that does not perturb the measurement is a significant challenge. To address this challenge, we proposed a new flow cell that employs a unique laminar coaxial flow field (for the purge and sample flows). A test system was built to conduct particle size distribution (PSD) measurements with no sampling bias using a state-of-the-art analyzer (Malvern Panalytical Insitec). The results revealed that the measurement zone is well defined solely by the sample flow, and the optical windows are well protected by the purge flow, with minimal risk of any depositions from the sample flow. Using this flow cell, the Insitec can successfully measure PSD under high pressure and temperature under moist, corrosive conditions without generating any sampling bias. Importantly, we successfully applied this flow cell for on-line PSD measurement for the flue gas of a 100 kW th pressurized oxy-coal combustor operating at 15 bara.

Suggested Citation

  • Mao Cheng & Zachariah Wargel & Duarte Magalhaes & Richard Axelbaum, 2025. "A Novel Optical Instrument for On-Line Measurement of Particle Size Distribution—Application to Clean Coal Technologies," Energies, MDPI, vol. 18(3), pages 1-12, February.
    • Handle: RePEc:gam:jeners:v:18:y:2025:i:3:p:720-:d:1583501
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/18/3/720/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/18/3/720/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Yang, Zhiwei & Khatri, Dishant & Verma, Piyush & Li, Tianxiang & Adeosun, Adewale & Kumfer, Benjamin M. & Axelbaum, Richard L., 2021. "Experimental study and demonstration of pilot-scale, dry feed, oxy-coal combustion under pressure," Applied Energy, Elsevier, vol. 285(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zhang, Chao & Zhao, Yangsheng & Feng, Zijun & Wang, Lei & Meng, Qiaorong & Lu, Yang & Gao, Qiang, 2023. "Comparative study on the chemical structure characteristics of lump coal during superheated water vapor pyrolysis and conventional pyrolysis," Energy, Elsevier, vol. 276(C).
    2. Zhang, Jiaye & Chen, Chongming & Zhou, Ao & Rahman, Zia ur & Wang, Xuebin & Stojiljković, Dragoslava & Manić, Nebojsa & Vujanović, Milan & Tan, Houzhang, 2022. "Morphology of char particles from coal pyrolysis in a pressurized entrained flow reactor: Effects of pressure and atmosphere," Energy, Elsevier, vol. 238(PB).
    3. Rahman, Zia ur & Wang, Xuebin & Zhang, Jiaye & Yang, Zhiwei & Dai, Gaofeng & Verma, Piyush & Mikulcic, Hrvoje & Vujanovic, Milan & Tan, Houzhang & Axelbaum, Richard L., 2022. "Nitrogen evolution, NOX formation and reduction in pressurized oxy coal combustion," Renewable and Sustainable Energy Reviews, Elsevier, vol. 157(C).
    4. Li, Yukai & Feng, Dongdong & Sun, Shaozeng & Zhao, Yijun & Shang, Qi & Chen, Kun & Li, Bowen & Wu, Jiangquan, 2022. "Biomass-coal reburning: Competitive mechanism of gas-solid product activation coal char," Energy, Elsevier, vol. 261(PA).
    5. Xiao, Guolin & Gao, Xiaori & Lu, Wei & Liu, Xiaodong & Asghar, Aamer Bilal & Jiang, Liu & Jing, Wenlin, 2023. "A physically based air proportioning methodology for optimized combustion in gas-fired boilers considering both heat release and NOx emissions," Applied Energy, Elsevier, vol. 350(C).
    6. Yuan, Zhenhua & Chen, Zhichao & Zhang, Bo & Gao, Xuelin & Li, Jiawei & Qiao, Yanyu & Li, Zhengqi, 2023. "Study on the slagging trends of the pre-combustion chamber in industrial pulverized coal boiler under different excess air coefficients by CFD numerical simulation," Energy, Elsevier, vol. 264(C).
    7. Ling, Jester Lih Jie & Yang, Won & Park, Han Saem & Lee, Ha Eun & Lee, See Hoon, 2023. "A comparative review on advanced biomass oxygen fuel combustion technologies for carbon capture and storage," Energy, Elsevier, vol. 284(C).
    8. Jin, Bo & Yao, Wenxing & Liu, Kaile & Lu, Shijian & Luo, Xiao & Liang, Zhiwu, 2022. "Self-optimizing control and safety assessment to achieve economic and safe operation for oxy-fuel combustion boiler island systems," Applied Energy, Elsevier, vol. 323(C).
    9. Yuan, Zhenhua & Chen, Zhichao & Bian, Liguo & Wu, Xiaolan & Zhang, Bo & Li, Jiawei & Qiao, Yanyu & Li, Zhengqi, 2023. "Influence of blade angle in the outer secondary air for swirl burner on the flow, combustion, and slagging characteristics in the pre-combustion chamber under the air-staged condition," Energy, Elsevier, vol. 275(C).
    10. Lasek, Janusz A. & Głód, Krzysztof & Słowik, Krzysztof, 2021. "The co-combustion of torrefied municipal solid waste and coal in bubbling fluidised bed combustor under atmospheric and elevated pressure," Renewable Energy, Elsevier, vol. 179(C), pages 828-841.
    11. Chowdhury, Mehrin & Khan, Mohieminul Islam & Islam, Nawshad Arslan & Choudhuri, Ahsan, 2022. "Design and performance analysis of a Swirl Pintle injector for a 1 MWth pressurized oxy-coal combustor," Energy, Elsevier, vol. 261(PB).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:18:y:2025:i:3:p:720-:d:1583501. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.