IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v18y2025i2p415-d1570145.html
   My bibliography  Save this article

Effects of Two-Stage Injection on Combustion and Particulate Emissions of a Direct Injection Spark-Ignition Engine Fueled with Methanol–Gasoline Blends

Author

Listed:
  • Miaomiao Zhang

    (School of Mechatronic Engineering, Jiangsu Normal University, Xuzhou 221116, China)

  • Jianbin Cao

    (School of Mechatronic Engineering, Jiangsu Normal University, Xuzhou 221116, China)

Abstract

Methanol is widely recognized as a promising alternative fuel for achieving carbon neutrality in internal combustion engines. Its use in direct injection spark-ignition (DISI) engines, either as pure methanol or blended fuels, has demonstrated improvements in thermal efficiency and reductions in certain gaseous pollutants. However, due to the complex influencing factors and the great harm to human health, its particulate emissions need to be further explored and controlled, which is also an inevitable requirement for the development of energy conservation and carbon reduction in internal combustion engines. This study explores the effects of two-stage injection strategies combined with fuel blending on the combustion characteristics, stability, and particulate emissions of DISI engines. By testing four methanol blending ratios and four injection ratios, the presented study identifies that M20 fuel with an 8:2 injection ratio achieves optimal combustion performance, stability, and increased indicated mean effective pressure. Furthermore, under low methanol blending ratios, the 8:2 injection ratio can reduce particulate number concentrations by approximately 20%. These findings suggest that a well-designed two-stage injection strategy combined with methanol–gasoline blends can effectively control particulate emissions while maintaining the power, efficiency, and combustion stability of DISI engines.

Suggested Citation

  • Miaomiao Zhang & Jianbin Cao, 2025. "Effects of Two-Stage Injection on Combustion and Particulate Emissions of a Direct Injection Spark-Ignition Engine Fueled with Methanol–Gasoline Blends," Energies, MDPI, vol. 18(2), pages 1-14, January.
    • Handle: RePEc:gam:jeners:v:18:y:2025:i:2:p:415-:d:1570145
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/18/2/415/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/18/2/415/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Nuthan Prasad, B.S. & Pandey, Jayashish Kumar & Kumar, G.N., 2020. "Impact of changing compression ratio on engine characteristics of an SI engine fueled with equi-volume blend of methanol and gasoline," Energy, Elsevier, vol. 191(C).
    2. Han, Dandan & E, Jiaqiang & Deng, Yuanwang & Chen, Jingwei & Leng, Erwei & Liao, Gaoliang & Zhao, Xiaohuan & Feng, Changling & Zhang, Feng, 2021. "A review of studies using hydrocarbon adsorption material for reducing hydrocarbon emissions from cold start of gasoline engine," Renewable and Sustainable Energy Reviews, Elsevier, vol. 135(C).
    3. Yu, Junjie & Kou, Chuanfu & Ma, Yinjie & E, Jiaqiang & Feng, Changling, 2024. "Effect analysis on hydrocarbon adsorption enhancement of different zeolites in cold start of gasoline engine based on Monte Carlo method," Energy, Elsevier, vol. 294(C).
    4. Miaomiao Zhang & Jianbin Cao, 2024. "Effects of Lean Burn on Combustion and Emissions of a DISI Engine Fueled with Methanol–Gasoline Blends," Energies, MDPI, vol. 17(16), pages 1-15, August.
    5. Gong, Changming & Li, Zhaohui & Sun, Jingzhen & Liu, Fenghua, 2020. "Evaluation on combustion and lean-burn limitof a medium compression ratio hydrogen/methanol dual-injection spark-ignition engine under methanol late-injection," Applied Energy, Elsevier, vol. 277(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Kumar, T. Sathish & Ashok, B., 2021. "Critical review on combustion phenomena of low carbon alcohols in SI engine with its challenges and future directions," Renewable and Sustainable Energy Reviews, Elsevier, vol. 152(C).
    2. Pandey, Jayashish Kumar & Kumar, G.N., 2022. "Effect of variable compression ratio and equivalence ratio on performance, combustion and emission of hydrogen port injection SI engine," Energy, Elsevier, vol. 239(PE).
    3. Kumar, Vijay & Choudhary, Akhilesh Kumar, 2024. "Prediction of the Performance and emission characteristics of diesel engine using diphenylamine Antioxidant and ceria nanoparticle additives with biodiesel based on machine learning," Energy, Elsevier, vol. 301(C).
    4. Yin, Xiaojun & Sun, Nannan & Sun, Ting & Shen, Hongguang & Mehra, Roopesh Kumar & Liu, Junlong & Wang, Ying & Yang, Bo & Zeng, Ke, 2022. "Experimental investigation the effects of spark discharge characteristics on the heavy-duty spark ignition natural gas engine at low load condition," Energy, Elsevier, vol. 239(PC).
    5. Wei, Jiangjun & He, Chengjun & Lv, Gang & Zhuang, Yuan & Qian, Yejian & Pan, Suozhu, 2021. "The combustion, performance and emissions investigation of a dual-fuel diesel engine using silicon dioxide nanoparticle additives to methanol," Energy, Elsevier, vol. 230(C).
    6. Ma, Ying & Yang, Heng & Zuo, Hongyan & Ma, Yi & Zuo, Qingsong & Chen, Ying & He, Xiaoxiang & Wei, Rongrong, 2023. "Three-dimensional EG@MOF matrix composite phase change materials for high efficiency battery cooling," Energy, Elsevier, vol. 278(C).
    7. Gong, Changming & Li, Dong & Liu, Jiajun & Liu, Fenghua, 2024. "Computational study of excess air ratio impacts on performances of a spark-ignition H2/methanol dual-injection engine," Energy, Elsevier, vol. 289(C).
    8. Maksymilian Mądziel, 2023. "Liquified Petroleum Gas-Fuelled Vehicle CO 2 Emission Modelling Based on Portable Emission Measurement System, On-Board Diagnostics Data, and Gradient-Boosting Machine Learning," Energies, MDPI, vol. 16(6), pages 1-15, March.
    9. Xu, Wanrong & Kou, Chuanfu & E, Jiaqiang & Feng, Changling & Tan, Yan, 2024. "Effect analysis on the flow uniformity and pressure drop characteristics of the rotary diesel particulate filter for heavy-duty truck," Energy, Elsevier, vol. 288(C).
    10. Xiangyang, Wang & Yu, Liu & Xiaoping, Li & Fangxi, Xie & Beiping, Jiang, 2024. "Experimental study on improvement of air-dilution combustion performance of methanol engine by adjusting intake guide flappers, exhaust variable valve timing and split injection," Energy, Elsevier, vol. 313(C).
    11. Liu, Shang & Lin, Zhelong & Qi, Yunliang & Wang, Zhi & Yang, Dongsheng & Lu, Guoxiang & Wang, Bo, 2024. "Combustion and emission characteristics of a spark ignition engine fueled with ammonia/gasoline and pure ammonia," Applied Energy, Elsevier, vol. 369(C).
    12. Zhang, Zhiqing & Lv, Junshuai & Xie, Guanglin & Wang, Su & Ye, Yanshuai & Huang, Gaohua & Tan, Donlgi, 2022. "Effect of assisted hydrogen on combustion and emission characteristics of a diesel engine fueled with biodiesel," Energy, Elsevier, vol. 254(PA).
    13. Cesur, Idris, 2022. "Investigation of the effects of water injection into an SI engine running on M15 methanol fuel on engine performance and exhaust emissions," Energy, Elsevier, vol. 261(PA).
    14. Guan, Wei & Gu, Jinkai & Pan, Xiubin & Pan, Mingzhang & Wang, Xinyan & Zhao, Hua & Tan, Dongli & Fu, Changcheng & Pedrozo, Vinícius B. & Zhang, Zhiqing, 2024. "Improvement of the light-load combustion control strategy for a heavy-duty diesel engine fueled with diesel/methonal by RSM-NSGA III," Energy, Elsevier, vol. 297(C).
    15. E, Jiaqiang & Zou, Zeyu & Kou, Chuanfu & Tan, Yan & Feng, Changlin & Zhou, Haiyun, 2024. "Effect analysis on hydrocarbon adsorption performance of transition metal modified zeolites in the gasoline engine during cold start process using Monte Carlo method," Energy, Elsevier, vol. 304(C).
    16. Gao, Jianbing & Zhang, Huijie & Li, Juxia & Wang, Yufeng & Tian, Guohong & Ma, Chaochen & Wang, Xiaochen, 2022. "Simulation on the effect of compression ratios on the performance of a hydrogen fueled opposed rotary piston engine," Renewable Energy, Elsevier, vol. 187(C), pages 428-439.
    17. Kirankumar, K.R. & Kumar, G.N. & Kamath, Nagaraja & Gangadharan, K.V., 2024. "Experimental investigation and optimization of performance, emission, and vibro-acoustic parameters of SI engine fueled with n-propanol and gasoline blends using ANN-GA coupled with NSGA3-modified TOP," Energy, Elsevier, vol. 306(C).
    18. E, Shengxin & Cui, Yaxin & Liu, Yuxian & Yin, Huichun, 2023. "Effects of the different phase change materials on heat dissipation performances of the ternary polymer Li-ion battery pack in hot climate," Energy, Elsevier, vol. 282(C).
    19. Yang, Jinxin & Wang, Huaiyu & Ji, Changwei & Chang, Ke & Wang, Shuofeng, 2023. "Investigation of intake closing timing on the flow field and combustion process in a small-scaled Wankel rotary engine under various engine speeds designed for the UAV application," Energy, Elsevier, vol. 273(C).
    20. Kou, Chuanfu & Feng, Changling & Ning, Dezhong & Xiang, Chen & Tan, Yan & E, Jiaqiang, 2025. "Collaborative optimization design of intake and combustion chamber structures for heavy-duty natural gas engines under knock limitation," Energy, Elsevier, vol. 316(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:18:y:2025:i:2:p:415-:d:1570145. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.