Optimization Study of a Tuned Mass Damper for a Large Monopile Wind Turbine

Passively tuned mass dampers (TMDs) are known to effectively mitigate the vibration of wind turbines. However, existing literature predominantly examines their application in damping vibrations of the tower or platform, overlooking the potential benefits of installing TMDs on the turbine blades themselves. This study investigates the impact of wind and wave loads on TMD damping effectiveness and proposes a comprehensive damping strategy involving TMDs installed in both the nacelle and the blades. The design optimized the mass and stiffness of these TMDs to enhance their performance. Results indicate that, as wind speeds increased from 12 m/s to 24 m/s, the power spectral density at the tower’s natural frequency (0.22 Hz) more than doubled. Notably, TMDs exhibited robust vibration damping capabilities under high wind speeds. Specifically, at wind speeds of 24 m/s, TMDs reduced anterior–posterior and lateral displacement at the tower top by 61.2% and 166.8%, respectively, when two TMDs were combined. Conversely, the study found that TMDs did not significantly improve vibration damping at lower to moderate wind speeds. This research underscores the importance of optimizing TMDs for high wind conditions to ensure wind turbine stability and mitigate potential vibration-related risks effectively under varying environmental loads, including wind and waves. It offers valuable insights for the refined design and deployment of TMDs in wind energy applications.