IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v16y2023i2p593-d1024759.html
   My bibliography  Save this article

Economic Assessment of Polypropylene Waste (PP) Pyrolysis in Circular Economy and Industrial Symbiosis

Author

Listed:
  • Anastasia Zabaniotou

    (Bioenergy, Circular Economy and Sustainability Group, Department of Chemical Engineering, Engineering School, Aristotle University of Thessaloniki, Un. Box 455, University Campus GR, 54124 Thessaloniki, Greece)

  • Ioannis Vaskalis

    (Bioenergy, Circular Economy and Sustainability Group, Department of Chemical Engineering, Engineering School, Aristotle University of Thessaloniki, Un. Box 455, University Campus GR, 54124 Thessaloniki, Greece)

Abstract

Plastic waste has a high energy content and can be utilized as an energy source. This study aims to assess the economic feasibility of polypropylene plastic waste (PP) pyrolysis. A literature review was carried out to determine the optimal pyrolysis conditions for oil production. The preferred pyrolysis temperature ranges from 450 °C to 550 °C, where the oil yields vary from 82 wt.% to 92.3 wt.%. Two scenarios were studied. In the first scenario, pyrolysis gas is used for the pyrolysis heating needs, whereas in the second scenario, natural gas is used. An overview of the economic performance of a pyrolysis plant with a capacity of 200,000 t/year is presented. Based on the results, the plant is economically viable, as it presents high profits and a short payback time for both scenarios considered. Although the annual revenues are smaller in scenario 1, the significant reduction in operating costs makes this scenario preferable. The annual profits amount to 37.3 M€, while the return on investment is 81% and the payback time is 1.16 years. In scenario 2, although the plant is still feasible and shows high profitability, the annual profits are lower by about 1.5 M€, while the payback time is 1.2 years.

Suggested Citation

  • Anastasia Zabaniotou & Ioannis Vaskalis, 2023. "Economic Assessment of Polypropylene Waste (PP) Pyrolysis in Circular Economy and Industrial Symbiosis," Energies, MDPI, vol. 16(2), pages 1-26, January.
    • Handle: RePEc:gam:jeners:v:16:y:2023:i:2:p:593-:d:1024759
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/16/2/593/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/16/2/593/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Ramez Abdallah & Adel Juaidi & Mahmoud Assad & Tareq Salameh & Francisco Manzano-Agugliaro, 2020. "Energy Recovery from Waste Tires Using Pyrolysis: Palestine as Case of Study," Energies, MDPI, vol. 13(7), pages 1-13, April.
    2. Mirkarimi, S.M.R. & Bensaid, S. & Chiaramonti, D., 2022. "Conversion of mixed waste plastic into fuel for diesel engines through pyrolysis process: A review," Applied Energy, Elsevier, vol. 327(C).
    3. Stella Bezergianni & Athanasios Dimitriadis & Gian-Claudio Faussone & Dimitrios Karonis, 2017. "Alternative Diesel from Waste Plastics," Energies, MDPI, vol. 10(11), pages 1-12, October.
    4. Sulaiman Al Yahya & Tahir Iqbal & Muhammad Mubashar Omar & Munir Ahmad, 2021. "Techno-Economic Analysis of Fast Pyrolysis of Date Palm Waste for Adoption in Saudi Arabia," Energies, MDPI, vol. 14(19), pages 1-12, September.
    5. Fivga, Antzela & Dimitriou, Ioanna, 2018. "Pyrolysis of plastic waste for production of heavy fuel substitute: A techno-economic assessment," Energy, Elsevier, vol. 149(C), pages 865-874.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Izabella Maj & Krzysztof Matus, 2023. "Aluminosilicate Clay Minerals: Kaolin, Bentonite, and Halloysite as Fuel Additives for Thermal Conversion of Biomass and Waste," Energies, MDPI, vol. 16(11), pages 1-17, May.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Anna Matuszewska & Adam Hańderek & Maciej Paczuski & Krzysztof Biernat, 2021. "Hydrocarbon Fractions from Thermolysis of Waste Plastics as Components of Engine Fuels," Energies, MDPI, vol. 14(21), pages 1-14, November.
    2. Anna Matuszewska & Marlena Owczuk & Krzysztof Biernat, 2022. "Current Trends in Waste Plastics’ Liquefaction into Fuel Fraction: A Review," Energies, MDPI, vol. 15(8), pages 1-32, April.
    3. Sameh Monna & Adel Juaidi & Ramez Abdallah & Aiman Albatayneh & Patrick Dutournie & Mejdi Jeguirim, 2021. "Towards Sustainable Energy Retrofitting, a Simulation for Potential Energy Use Reduction in Residential Buildings in Palestine," Energies, MDPI, vol. 14(13), pages 1-13, June.
    4. Fan, Liangliang & Liu, Lei & Xiao, Zhiguo & Su, Zheyang & Huang, Pei & Peng, Hongyu & Lv, Sen & Jiang, Haiwei & Ruan, Roger & Chen, Paul & Zhou, Wenguang, 2021. "Comparative study of continuous-stirred and batch microwave pyrolysis of linear low-density polyethylene in the presence/absence of HZSM-5," Energy, Elsevier, vol. 228(C).
    5. Ramez Abdallah & Adel Juaidi & Salameh Abdel-Fattah & Mahmoud Qadi & Montaser Shadid & Aiman Albatayneh & Hüseyin Çamur & Amos García-Cruz & Francisco Manzano-Agugliaro, 2022. "The Effects of Soiling and Frequency of Optimal Cleaning of PV Panels in Palestine," Energies, MDPI, vol. 15(12), pages 1-18, June.
    6. Gian Claudio Faussone & Andrej Kržan & Miha Grilc, 2021. "Conversion of Marine Litter from Venice Lagoon into Marine Fuels via Thermochemical Route: The Overview of Products, Their Yield, Quality and Environmental Impact," Sustainability, MDPI, vol. 13(16), pages 1-16, August.
    7. Farrell, C.C. & Osman, A.I. & Doherty, R. & Saad, M. & Zhang, X. & Murphy, A. & Harrison, J. & Vennard, A.S.M. & Kumaravel, V. & Al-Muhtaseb, A.H. & Rooney, D.W., 2020. "Technical challenges and opportunities in realising a circular economy for waste photovoltaic modules," Renewable and Sustainable Energy Reviews, Elsevier, vol. 128(C).
    8. Alberto-Jesus Perea-Moreno & Francisco Manzano-Agugliaro, 2020. "Energy Saving at Cities," Energies, MDPI, vol. 13(15), pages 1-3, July.
    9. Panagiotis Grammelis & Nikolaos Margaritis & Petros Dallas & Dimitrios Rakopoulos & Georgios Mavrias, 2021. "A Review on Management of End of Life Tires (ELTs) and Alternative Uses of Textile Fibers," Energies, MDPI, vol. 14(3), pages 1-20, January.
    10. Choudhary, Rajesh & Mukhija, Abhishek & Sharma, Subhash & Choudhary, Rohitash & Chand, Ami & Dewangan, Ashok K. & Gaurav, Gajendra Kumar & Klemeš, Jiří Jaromír, 2023. "Energy-saving COVID–19 biomedical plastic waste treatment using the thermal - Catalytic pyrolysis," Energy, Elsevier, vol. 264(C).
    11. Mukherjee, C. & Denney, J. & Mbonimpa, E.G. & Slagley, J. & Bhowmik, R., 2020. "A review on municipal solid waste-to-energy trends in the USA," Renewable and Sustainable Energy Reviews, Elsevier, vol. 119(C).
    12. King, Peter, 2018. "Fishing for litter: A cost-benefit analysis of how to abate ocean pollution," MPRA Paper 92298, University Library of Munich, Germany.
    13. Park, Ki-Bum & Jeong, Yong-Seong & Guzelciftci, Begum & Kim, Joo-Sik, 2019. "Characteristics of a new type continuous two-stage pyrolysis of waste polyethylene," Energy, Elsevier, vol. 166(C), pages 343-351.
    14. Ebtihal A. AlDayyat & Motasem N. Saidan & Zayed Al-Hamamre & Mohammad Al-Addous & Malek Alkasrawi, 2021. "Pyrolysis of Solid Waste for Bio-Oil and Char Production in Refugees’ Camp: A Case Study," Energies, MDPI, vol. 14(13), pages 1-11, June.
    15. Soyoung Han & Yong-Chul Jang & Yeon-Seok Choi & Sang-Kyu Choi, 2020. "Thermogravimetric Kinetic Study of Automobile Shredder Residue (ASR) Pyrolysis," Energies, MDPI, vol. 13(6), pages 1-16, March.
    16. Djaafri, Mohammed & Drissi, Aicha & Mehdaoui, Sabrina & Kalloum, Slimane & Atelge, M.R. & Khelafi, Mostefa & Kaidi, Kamel & Salem, Fethya & Tahri, Ahmed & Atabani, A.E. & Štěpanec, Libor, 2023. "Anaerobic digestion of dry palms from five cultivars of Algerian date palm (Phoenix dactylifera L.) namely H'mira, Teggaza, Tinacer, Aghamou and Takarbouchet: A new comparative study," Energy, Elsevier, vol. 269(C).
    17. Khairil & Teuku Meurah Indra Riayatsyah & Samsul Bahri & Sarwo Edhy Sofyan & Jalaluddin Jalaluddin & Fitranto Kusumo & Arridina Susan Silitonga & Yanti Padli & Muhammad Jihad & Abd Halim Shamsuddin, 2020. "Experimental Study on the Performance of an SI Engine Fueled by Waste Plastic Pyrolysis Oil–Gasoline Blends," Energies, MDPI, vol. 13(16), pages 1-15, August.
    18. Spyridon Achinas & Johan Horjus & Vasileios Achinas & Gerrit Jan Willem Euverink, 2019. "A PESTLE Analysis of Biofuels Energy Industry in Europe," Sustainability, MDPI, vol. 11(21), pages 1-24, October.
    19. Park, Ki-Bum & Oh, Seung-Jin & Begum, Guzelciftci & Kim, Joo-Sik, 2018. "Production of clean oil with low levels of chlorine and olefins in a continuous two-stage pyrolysis of a mixture of waste low-density polyethylene and polyvinyl chloride," Energy, Elsevier, vol. 157(C), pages 402-411.
    20. Mendoza-Martinez, Clara & Sermyagina, Ekaterina & Saari, Jussi & Ramos, Vinicius Faria & Vakkilainen, Esa & Cardoso, Marcelo & Alves Rocha, Elém Patrícia, 2023. "Fast oxidative pyrolysis of eucalyptus wood residues to replace fossil oil in pulp industry," Energy, Elsevier, vol. 263(PE).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:16:y:2023:i:2:p:593-:d:1024759. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.