IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v15y2022i22p8741-d979125.html
   My bibliography  Save this article

Parametric Analysis of a Solar Water Heater Integrated with PCM for Load Shifting

Author

Listed:
  • Sofiene Mellouli

    (College of Engineering, Mechanical Engineering Department, Jazan University, Jazan 45142, Saudi Arabia)

  • Talal Alqahtani

    (College of Engineering, Mechanical Engineering Department, King Khalid University, Abha 61421, Saudi Arabia)

  • Salem Algarni

    (College of Engineering, Mechanical Engineering Department, King Khalid University, Abha 61421, Saudi Arabia)

Abstract

Integrating a solar water heater (SWH) with a phase change material (PCM)-based latent heat storage is an attractive method for transferring load from peak to off-peak hours. This transferring load varies as the physical parameters of the PCM change. Thus, the aim of this study is to perform a parametric analysis of the SWH on the basis of the PCM’s thermophysical properties. A mathematical model was established, and a computation code was developed to describe the physical phenomenon of heat storage/release in/from the SWH system. The thermal energy stored and the energy efficiency are used as key performance indicators of the new SWH–PCM system. The obtained numerical results demonstrate that the used key performance indicators were significantly impacted by the PCM thermo-physical properties (melting temperature, density, and latent heat). Using this model, various numerical simulations are performed, and the results indicate that, SWH with PCM, 20.2% of thermal energy on-peak periods load is shifted to the off-peak period. In addition, by increasing the PCM’s density and enthalpy, higher load shifting is observed. In addition, the PCM, which has a lower melting point, can help the SWH retain water temperature for a longer period of time. There are optimal PCM thermo-physical properties that give the best specific energy recovery and thermal efficiency of the SWH–PCM system. For the proposed SWH–PCM system, the optimal PCM thermo-physical properties, i.e., the melting temperature is 313 K, the density is 3200 kg/m 3 , and the latent heat is 520 kg/kg.

Suggested Citation

  • Sofiene Mellouli & Talal Alqahtani & Salem Algarni, 2022. "Parametric Analysis of a Solar Water Heater Integrated with PCM for Load Shifting," Energies, MDPI, vol. 15(22), pages 1-16, November.
    • Handle: RePEc:gam:jeners:v:15:y:2022:i:22:p:8741-:d:979125
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/15/22/8741/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/15/22/8741/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Xue, H. Sheng, 2016. "Experimental investigation of a domestic solar water heater with solar collector coupled phase-change energy storage," Renewable Energy, Elsevier, vol. 86(C), pages 257-261.
    2. Itamar A. Harris Bernal & Arthur M. James Rivas & María De Los A. Ortega Del Rosario & M. Ziad Saghir, 2022. "A Redesign Methodology to Improve the Performance of a Thermal Energy Storage with Phase Change Materials: A Numerical Approach," Energies, MDPI, vol. 15(3), pages 1-23, January.
    3. Mazman, Muhsin & Cabeza, Luisa F. & Mehling, Harald & Nogues, Miquel & Evliya, Hunay & Paksoy, Halime Ö., 2009. "Utilization of phase change materials in solar domestic hot water systems," Renewable Energy, Elsevier, vol. 34(6), pages 1639-1643.
    4. Mettawee, Eman-Bellah S. & Assassa, Ghazy M.R., 2006. "Experimental study of a compact PCM solar collector," Energy, Elsevier, vol. 31(14), pages 2958-2968.
    5. Kürklü, Ahmet & Özmerzi, Aziz & Bilgin, Sefai, 2002. "Thermal performance of a water-phase change material solar collector," Renewable Energy, Elsevier, vol. 26(3), pages 391-399.
    6. Sharma, Atul & Tyagi, V.V. & Chen, C.R. & Buddhi, D., 2009. "Review on thermal energy storage with phase change materials and applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 13(2), pages 318-345, February.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Martin Beer & Dušan Kudelas & Radim Rybár, 2022. "A Numerical Analysis of the Thermal Energy Storage Based on Porous Gyroid Structure Filled with Sodium Acetate Trihydrate," Energies, MDPI, vol. 16(1), pages 1-17, December.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Waleed Zakri & Sofiene Mellouli & Yahya Fageehi, 2022. "Performance Assessment of Three Latent Heat Storage Designs for a Solar Hot Water Tank," Sustainability, MDPI, vol. 15(1), pages 1-16, December.
    2. Seddegh, Saeid & Wang, Xiaolin & Henderson, Alan D. & Xing, Ziwen, 2015. "Solar domestic hot water systems using latent heat energy storage medium: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 49(C), pages 517-533.
    3. Sharif, M.K. Anuar & Al-Abidi, A.A. & Mat, S. & Sopian, K. & Ruslan, M.H. & Sulaiman, M.Y. & Rosli, M.A.M., 2015. "Review of the application of phase change material for heating and domestic hot water systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 42(C), pages 557-568.
    4. Abokersh, Mohamed Hany & El-Morsi, Mohamed & Sharaf, Osama & Abdelrahman, Wael, 2017. "An experimental evaluation of direct flow evacuated tube solar collector integrated with phase change material," Energy, Elsevier, vol. 139(C), pages 1111-1125.
    5. Khan, Mohammed Mumtaz A. & Saidur, R. & Al-Sulaiman, Fahad A., 2017. "A review for phase change materials (PCMs) in solar absorption refrigeration systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 76(C), pages 105-137.
    6. Feliński, P. & Sekret, R., 2016. "Experimental study of evacuated tube collector/storage system containing paraffin as a PCM," Energy, Elsevier, vol. 114(C), pages 1063-1072.
    7. Kahwaji, Samer & Johnson, Michel B. & Kheirabadi, Ali C. & Groulx, Dominic & White, Mary Anne, 2018. "A comprehensive study of properties of paraffin phase change materials for solar thermal energy storage and thermal management applications," Energy, Elsevier, vol. 162(C), pages 1169-1182.
    8. Dutil, Yvan & Rousse, Daniel R. & Salah, Nizar Ben & Lassue, Stéphane & Zalewski, Laurent, 2011. "A review on phase-change materials: Mathematical modeling and simulations," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(1), pages 112-130, January.
    9. Sardari, Pouyan Talebizadeh & Mohammed, Hayder I. & Giddings, Donald & walker, Gavin S. & Gillott, Mark & Grant, David, 2019. "Numerical study of a multiple-segment metal foam-PCM latent heat storage unit: Effect of porosity, pore density and location of heat source," Energy, Elsevier, vol. 189(C).
    10. Salunkhe, Pramod B. & Shembekar, Prashant S., 2012. "A review on effect of phase change material encapsulation on the thermal performance of a system," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(8), pages 5603-5616.
    11. Abdelsalam, M.Y. & Teamah, H.M. & Lightstone, M.F. & Cotton, J.S., 2020. "Hybrid thermal energy storage with phase change materials for solar domestic hot water applications: Direct versus indirect heat exchange systems," Renewable Energy, Elsevier, vol. 147(P1), pages 77-88.
    12. Murray, Robynne E. & Groulx, Dominic, 2014. "Experimental study of the phase change and energy characteristics inside a cylindrical latent heat energy storage system: Part 2 simultaneous charging and discharging," Renewable Energy, Elsevier, vol. 63(C), pages 724-734.
    13. Elfasakhany, Ashraf, 2016. "Performance assessment and productivity of a simple-type solar still integrated with nanocomposite energy storage system," Applied Energy, Elsevier, vol. 183(C), pages 399-407.
    14. Rathod, Manish K. & Banerjee, Jyotirmay, 2013. "Thermal stability of phase change materials used in latent heat energy storage systems: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 18(C), pages 246-258.
    15. Li, C. & Wang, R.Z., 2012. "Building integrated energy storage opportunities in China," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(8), pages 6191-6211.
    16. Zhao, Jianguo & Guo, Yong & Feng, Feng & Tong, Qinghua & Qv, Wenshan & Wang, Haiqing, 2011. "Microstructure and thermal properties of a paraffin/expanded graphite phase-change composite for thermal storage," Renewable Energy, Elsevier, vol. 36(5), pages 1339-1342.
    17. Tian, Y. & Zhao, C.Y., 2011. "A numerical investigation of heat transfer in phase change materials (PCMs) embedded in porous metals," Energy, Elsevier, vol. 36(9), pages 5539-5546.
    18. Alshukri, Mohammed J. & Eidan, Adel A. & Najim, Saleh Ismail, 2021. "Thermal performance of heat pipe evacuated tube solar collector integrated with different types of phase change materials at various location," Renewable Energy, Elsevier, vol. 171(C), pages 635-646.
    19. Wang, Zeyu & Diao, Yanhua & Zhao, Yaohua & Chen, Chuanqi & Liang, Lin & Wang, Tengyue, 2020. "Thermal performance of integrated collector storage solar air heater with evacuated tube and lap joint-type flat micro-heat pipe arrays," Applied Energy, Elsevier, vol. 261(C).
    20. Mandal, Swaroop Kumar & Kumar, Samarjeet & Singh, Purushottam Kumar & Mishra, Santosh Kumar & Singh, D.K., 2020. "Performance investigation of nanocomposite based solar water heater," Energy, Elsevier, vol. 198(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:15:y:2022:i:22:p:8741-:d:979125. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.