IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v14y2021i4p995-d499198.html
   My bibliography  Save this article

Thermal Analysis of Organic and Nanoencapsulated Electrospun Phase Change Materials

Author

Listed:
  • Evdoxia Paroutoglou

    (Department of the Built Environment, Division of Sustainability, Energy and Indoor Environment, Aalborg University, 2450 København SV, Denmark)

  • Peter Fojan

    (Department of Materials and Production, Aalborg University, 9220 Aalborg Ø, Denmark)

  • Leonid Gurevich

    (Department of Materials and Production, Aalborg University, 9220 Aalborg Ø, Denmark)

  • Göran Hultmark

    (Department of the Built Environment, Division of Sustainability, Energy and Indoor Environment, Aalborg University, 2450 København SV, Denmark)

  • Alireza Afshari

    (Department of the Built Environment, Division of Sustainability, Energy and Indoor Environment, Aalborg University, 2450 København SV, Denmark)

Abstract

Latent heat stored in phase change materials (PCM) can greatly improve energy efficiency in indoor heating/cooling applications. This study presents the materials and methods for the formation and characterization of a PCM layer for a latent heat thermal energy storage (LHTES) application. Four commercially available PCMs comprising the classes of organic paraffins and organic non-paraffins were selected for thermal storage application. Pure organic PCM and PCM in water emulsions were experimentally investigated. PCM electrospun microfibers were produced by a co-axial electrospinning technique, where solutions of Polycaprolactone (PCL) 9% w / v and 12% w / v in dichloromethane (DCM) were used as the fiber shell materials. PCM emulsified with sodium dodecyl sulfate (SDS), and Polyvinylalcohol 10% w / v (PVA) constituted the core of the fibers. The thermal behavior of the PCM, PCM emulsions, and PCM electrospun fibers were analyzed with differential scanning calorimetry (DSC). A commercial organic paraffin with a phase change temperature of 18 °C (RT 18) in its pure and emulsified forms was found to be a suitable PCM candidate for LHTES. The PVA-PCM electrospun fiber matrix of the organic paraffin RT18 with a PCL concentration of 12% w / v showed the most promising results leading to an encapsulation efficiency of 67%.

Suggested Citation

  • Evdoxia Paroutoglou & Peter Fojan & Leonid Gurevich & Göran Hultmark & Alireza Afshari, 2021. "Thermal Analysis of Organic and Nanoencapsulated Electrospun Phase Change Materials," Energies, MDPI, vol. 14(4), pages 1-15, February.
    • Handle: RePEc:gam:jeners:v:14:y:2021:i:4:p:995-:d:499198
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/14/4/995/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/14/4/995/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Salunkhe, Pramod B. & Shembekar, Prashant S., 2012. "A review on effect of phase change material encapsulation on the thermal performance of a system," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(8), pages 5603-5616.
    2. Behzadi, S. & Farid, M.M., 2014. "Long term thermal stability of organic PCMs," Applied Energy, Elsevier, vol. 122(C), pages 11-16.
    3. Su, Weiguang & Darkwa, Jo & Kokogiannakis, Georgios, 2015. "Review of solid–liquid phase change materials and their encapsulation technologies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 48(C), pages 373-391.
    4. Shukla, Anant & Buddhi, D. & Sawhney, R.L., 2008. "Thermal cycling test of few selected inorganic and organic phase change materials," Renewable Energy, Elsevier, vol. 33(12), pages 2606-2614.
    5. Rathod, Manish K. & Banerjee, Jyotirmay, 2013. "Thermal stability of phase change materials used in latent heat energy storage systems: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 18(C), pages 246-258.
    6. Zhang, Xiyao & Niu, Jianlei & Wu, Jian-Yong, 2019. "Development and characterization of novel and stable silicon nanoparticles-embedded PCM-in-water emulsions for thermal energy storage," Applied Energy, Elsevier, vol. 238(C), pages 1407-1416.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Tomasz Tietze & Piotr Szulc & Daniel Smykowski & Andrzej Sitka & Romuald Redzicki, 2021. "Application of Phase Change Material and Artificial Neural Networks for Smoothing of Heat Flux Fluctuations," Energies, MDPI, vol. 14(12), pages 1-17, June.
    2. Evdoxia Paroutoglou & Peter Fojan & Leonid Gurevich & Alireza Afshari, 2022. "Thermal Properties of Novel Phase-Change Materials Based on Tamanu and Coconut Oil Encapsulated in Electrospun Fiber Matrices," Sustainability, MDPI, vol. 14(12), pages 1-20, June.
    3. Evdoxia Paroutoglou & Peter Fojan & Leonid Gurevich & Simon Furbo & Jianhua Fan & Marc Medrano & Alireza Afshari, 2022. "A Numerical Parametric Study of a Double-Pipe LHTES Unit with PCM Encapsulated in the Annular Space," Sustainability, MDPI, vol. 14(20), pages 1-16, October.
    4. Liu, Changhui & Xiao, Tong & Zhao, Jiateng & Liu, Qingyi & Sun, Wenjie & Guo, Chenglong & Ali, Hafiz Muhammad & Chen, Xiao & Rao, Zhonghao & Gu, Yanlong, 2023. "Polymer engineering in phase change thermal storage materials," Renewable and Sustainable Energy Reviews, Elsevier, vol. 188(C).
    5. Aramesh, M. & Shabani, B., 2022. "Metal foam-phase change material composites for thermal energy storage: A review of performance parameters," Renewable and Sustainable Energy Reviews, Elsevier, vol. 155(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Akeiber, Hussein & Nejat, Payam & Majid, Muhd Zaimi Abd. & Wahid, Mazlan A. & Jomehzadeh, Fatemeh & Zeynali Famileh, Iman & Calautit, John Kaiser & Hughes, Ben Richard & Zaki, Sheikh Ahmad, 2016. "A review on phase change material (PCM) for sustainable passive cooling in building envelopes," Renewable and Sustainable Energy Reviews, Elsevier, vol. 60(C), pages 1470-1497.
    2. Zeinelabdein, Rami & Omer, Siddig & Gan, Guohui, 2018. "Critical review of latent heat storage systems for free cooling in buildings," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 2843-2868.
    3. Mohamed, Shamseldin A. & Al-Sulaiman, Fahad A. & Ibrahim, Nasiru I. & Zahir, Md. Hasan & Al-Ahmed, Amir & Saidur, R. & Yılbaş, B.S. & Sahin, A.Z., 2017. "A review on current status and challenges of inorganic phase change materials for thermal energy storage systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 70(C), pages 1072-1089.
    4. Liu, Yang & Zheng, Ruowei & Li, Ji, 2022. "High latent heat phase change materials (PCMs) with low melting temperature for thermal management and storage of electronic devices and power batteries: Critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 168(C).
    5. Khan, Mohammed Mumtaz A. & Saidur, R. & Al-Sulaiman, Fahad A., 2017. "A review for phase change materials (PCMs) in solar absorption refrigeration systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 76(C), pages 105-137.
    6. Soares, N. & Bastos, J. & Pereira, L. Dias & Soares, A. & Amaral, A.R. & Asadi, E. & Rodrigues, E. & Lamas, F.B. & Monteiro, H. & Lopes, M.A.R. & Gaspar, A.R., 2017. "A review on current advances in the energy and environmental performance of buildings towards a more sustainable built environment," Renewable and Sustainable Energy Reviews, Elsevier, vol. 77(C), pages 845-860.
    7. Ikutegbe, Charles A. & Farid, Mohammed M., 2020. "Application of phase change material foam composites in the built environment: A critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 131(C).
    8. Jacob, Rhys & Bruno, Frank, 2015. "Review on shell materials used in the encapsulation of phase change materials for high temperature thermal energy storage," Renewable and Sustainable Energy Reviews, Elsevier, vol. 48(C), pages 79-87.
    9. Huang, Xiang & Alva, Guruprasad & Jia, Yuting & Fang, Guiyin, 2017. "Morphological characterization and applications of phase change materials in thermal energy storage: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 72(C), pages 128-145.
    10. Afshan, Mahboob E. & Selvakumar, A.S & Velraj, R. & Rajaraman, R., 2020. "Effect of aspect ratio and dispersed PCM balls on the charging performance of a latent heat thermal storage unit for solar thermal applications," Renewable Energy, Elsevier, vol. 148(C), pages 876-888.
    11. Ferrer, Gerard & Solé, Aran & Barreneche, Camila & Martorell, Ingrid & Cabeza, Luisa F., 2015. "Review on the methodology used in thermal stability characterization of phase change materials," Renewable and Sustainable Energy Reviews, Elsevier, vol. 50(C), pages 665-685.
    12. Nie, Binjian & Palacios, Anabel & Zou, Boyang & Liu, Jiaxu & Zhang, Tongtong & Li, Yunren, 2020. "Review on phase change materials for cold thermal energy storage applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 134(C).
    13. Soni, Vikram & Darzi, Alireza & McPhee, Hannah & Saber, Sepehr & Zargartalebi, Mohammad & Riordon, Jason & Ozden, Adnan & Holmes, Michael & Zatonski, Vlad & Toews, Matthew & Sinton, David, 2023. "Performance analysis of phase change slurries for closed-loop geothermal system," Renewable Energy, Elsevier, vol. 216(C).
    14. Liu, Yushi & Yang, Yingzi, 2018. "Form-stable phase change material based on Na2CO3·10H2O-Na2HPO4·12H2O eutectic hydrated salt/expanded graphite oxide composite: The influence of chemical structures of expanded graphite oxide," Renewable Energy, Elsevier, vol. 115(C), pages 734-740.
    15. Amaral, C. & Vicente, R. & Marques, P.A.A.P. & Barros-Timmons, A., 2017. "Phase change materials and carbon nanostructures for thermal energy storage: A literature review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 79(C), pages 1212-1228.
    16. Ran, Fengming & Chen, Yunkang & Cong, Rongshuai & Fang, Guiyin, 2020. "Flow and heat transfer characteristics of microencapsulated phase change slurry in thermal energy systems: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 134(C).
    17. Milián, Yanio E. & Gutiérrez, Andrea & Grágeda, Mario & Ushak, Svetlana, 2017. "A review on encapsulation techniques for inorganic phase change materials and the influence on their thermophysical properties," Renewable and Sustainable Energy Reviews, Elsevier, vol. 73(C), pages 983-999.
    18. Nikpourian, Hediyeh & Bahramian, Ahmad Reza & Abdollahi, Mahdi, 2020. "On the thermal performance of a novel PCM nanocapsule: The effect of core/shell," Renewable Energy, Elsevier, vol. 151(C), pages 322-331.
    19. Ge, Haoshan & Li, Haiyan & Mei, Shengfu & Liu, Jing, 2013. "Low melting point liquid metal as a new class of phase change material: An emerging frontier in energy area," Renewable and Sustainable Energy Reviews, Elsevier, vol. 21(C), pages 331-346.
    20. Warzoha, Ronald J. & Weigand, Rebecca M. & Fleischer, Amy S., 2015. "Temperature-dependent thermal properties of a paraffin phase change material embedded with herringbone style graphite nanofibers," Applied Energy, Elsevier, vol. 137(C), pages 716-725.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:14:y:2021:i:4:p:995-:d:499198. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.