IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v13y2020i11p2806-d366070.html
   My bibliography  Save this article

Effect of Fins on the Internal Flow Characteristics in the Draft Tube of a Francis Turbine Model

Author

Listed:
  • Seung-Jun Kim

    (Industrial Technology (Green Process and Energy System Engineering), Korea University of Science and Technology, Daejeon 34113, Korea
    Clean Energy R&D Department, Korea Institute of Industrial Technology, Cheonan-si 31056, Korea)

  • Young-Seok Choi

    (Industrial Technology (Green Process and Energy System Engineering), Korea University of Science and Technology, Daejeon 34113, Korea
    Clean Energy R&D Department, Korea Institute of Industrial Technology, Cheonan-si 31056, Korea)

  • Yong Cho

    (K-water Convergence Institute, Korea Water Resources Corporation, Daejeon 34045, Korea)

  • Jong-Woong Choi

    (K-water Convergence Institute, Korea Water Resources Corporation, Daejeon 34045, Korea)

  • Jung-Jae Hyun

    (K-water Convergence Institute, Korea Water Resources Corporation, Daejeon 34045, Korea
    Department of Mechanical Engineering, Yonsei University, Seoul 03722, Korea)

  • Won-Gu Joo

    (Department of Mechanical Engineering, Yonsei University, Seoul 03722, Korea)

  • Jin-Hyuk Kim

    (Industrial Technology (Green Process and Energy System Engineering), Korea University of Science and Technology, Daejeon 34113, Korea
    Clean Energy R&D Department, Korea Institute of Industrial Technology, Cheonan-si 31056, Korea)

Abstract

Undesirable flow phenomena in Francis turbines are caused by pressure fluctuations induced under conditions of low flow rate; the resulting vortex ropes with precession in the draft tube (DT) can degrade performance and increase the instability of turbine operations. To suppress these DT flow instabilities, flow deflectors, grooves, or other structures are often added to the DT into which air or water is injected. This preliminary study investigates the effects of anti-cavity fins on the suppression of vortex ropes in DTs without air injection. Unsteady-state Reynolds-averaged Navier–Stokes analyses were conducted using a scale-adaptive simulation shear stress transport turbulence model to observe the unsteady internal flow and pressure characteristics by applying anti-cavity fins in the DT of a Francis turbine model. A vortex rope with precession was observed in the DT under conditions of low flow rate, and the anti-cavity fins were confirmed to affect the mitigation of the vortex rope. Moreover, at the low flow rate conditions under which the vortex rope developed, the application of anti-cavity fins was confirmed to reduce the maximum unsteady pressure.

Suggested Citation

  • Seung-Jun Kim & Young-Seok Choi & Yong Cho & Jong-Woong Choi & Jung-Jae Hyun & Won-Gu Joo & Jin-Hyuk Kim, 2020. "Effect of Fins on the Internal Flow Characteristics in the Draft Tube of a Francis Turbine Model," Energies, MDPI, vol. 13(11), pages 1-23, June.
  • Handle: RePEc:gam:jeners:v:13:y:2020:i:11:p:2806-:d:366070
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/13/11/2806/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/13/11/2806/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. KC, Anup & Lee, Young Ho & Thapa, Bhola, 2016. "CFD study on prediction of vortex shedding in draft tube of Francis turbine and vortex control techniques," Renewable Energy, Elsevier, vol. 86(C), pages 1406-1421.
    2. Zhenmu Chen & Patrick M. Singh & Young-Do Choi, 2016. "Francis Turbine Blade Design on the Basis of Port Area and Loss Analysis," Energies, MDPI, vol. 9(3), pages 1-12, March.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Raul-Alexandru Szakal & Alexandru Doman & Sebastian Muntean, 2021. "Influence of the Reshaped Elbow on the Unsteady Pressure Field in a Simplified Geometry of the Draft Tube," Energies, MDPI, vol. 14(5), pages 1-21, March.
    2. Zhou, Xing & Shi, Changzheng & Miyagawa, Kazuyoshi & Wu, Hegao, 2021. "Effect of modified draft tube with inclined conical diffuser on flow instabilities in Francis turbine," Renewable Energy, Elsevier, vol. 172(C), pages 606-617.
    3. Shahzer, Mohammad Abu & Kim, Jin-Hyuk, 2024. "Investigation of role of fins in a Francis turbine model's cavitation-induced instabilities under design and off-design conditions," Energy, Elsevier, vol. 292(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Chongfei Sun & Zirong Luo & Jianzhong Shang & Zhongyue Lu & Yiming Zhu & Guoheng Wu, 2018. "Design and Numerical Analysis of a Novel Counter-Rotating Self-Adaptable Wave Energy Converter Based on CFD Technology," Energies, MDPI, vol. 11(4), pages 1-21, March.
    2. Kim, Seung-Jun & Choi, Young-Seok & Cho, Yong & Choi, Jong-Woong & Kim, Jin-Hyuk, 2019. "Effect of blade thickness on the hydraulic performance of a Francis hydro turbine model," Renewable Energy, Elsevier, vol. 134(C), pages 807-817.
    3. Zaher Mundher Yaseen & Ameen Mohammed Salih Ameen & Mohammed Suleman Aldlemy & Mumtaz Ali & Haitham Abdulmohsin Afan & Senlin Zhu & Ahmed Mohammed Sami Al-Janabi & Nadhir Al-Ansari & Tiyasha Tiyasha &, 2020. "State-of-the Art-Powerhouse, Dam Structure, and Turbine Operation and Vibrations," Sustainability, MDPI, vol. 12(4), pages 1-40, February.
    4. Shiraghaee, Shahab & Sundström, Joel & Raisee, Mehrdad & Cervantes, Michel J., 2024. "Extending the operating range of axial turbines with the protrusion of radially adjustable flat plates: An experimental investigation," Renewable Energy, Elsevier, vol. 225(C).
    5. Su, Wen-Tao & Binama, Maxime & Li, Yang & Zhao, Yue, 2020. "Study on the method of reducing the pressure fluctuation of hydraulic turbine by optimizing the draft tube pressure distribution," Renewable Energy, Elsevier, vol. 162(C), pages 550-560.
    6. Xuanlin Peng & Jianzhong Zhou & Chu Zhang & Ruhai Li & Yanhe Xu & Diyi Chen, 2017. "An Intelligent Optimization Method for Vortex-Induced Vibration Reducing and Performance Improving in a Large Francis Turbine," Energies, MDPI, vol. 10(11), pages 1-17, November.
    7. Sotoudeh, Nahale & Maddahian, Reza & Cervantes, Michel J., 2020. "Investigation of Rotating Vortex Rope formation during load variation in a Francis turbine draft tube," Renewable Energy, Elsevier, vol. 151(C), pages 238-254.
    8. Li, Puxi & Xiao, Ruofu & Tao, Ran, 2022. "Study of vortex rope based on flow energy dissipation and vortex identification," Renewable Energy, Elsevier, vol. 198(C), pages 1065-1081.
    9. Yu, Zhi-Feng & Wang, Wen-Quan & Yan, Yan & Liu, Xing-Shun, 2021. "Energy loss evaluation in a Francis turbine under overall operating conditions using entropy production method," Renewable Energy, Elsevier, vol. 169(C), pages 982-999.
    10. Muhirwa, Alexis & Li, Biao & Su, Wen-Tao & Liu, Quan-Zhong & Binama, Maxime & Wu, Jian & Cai, Wei-Hua, 2020. "Investigation on mutual traveling influences between the draft tube and upstream components of a Francis turbine unit," Renewable Energy, Elsevier, vol. 162(C), pages 973-992.
    11. Luo, Xianwu & Ye, Weixiang & Huang, Renfang & Wang, Yiwei & Du, Tezhuan & Huang, Chenguang, 2020. "Numerical investigations of the energy performance and pressure fluctuations for a waterjet pump in a non-uniform inflow," Renewable Energy, Elsevier, vol. 153(C), pages 1042-1052.
    12. Muhirwa, Alexis & Cai, Wei-Hua & Su, Wen-Tao & Liu, Quanzhong & Binama, Maxime & Li, Biao & Wu, Jian, 2020. "A review on remedial attempts to counteract the power generation compromise from draft tubes of hydropower plants," Renewable Energy, Elsevier, vol. 150(C), pages 743-764.
    13. Yu Chen & Jianxu Zhou & Bryan Karney & Qiang Guo & Jian Zhang, 2022. "Analytical Implementation and Prediction of Hydraulic Characteristics for a Francis Turbine Runner Operated at BEP," Sustainability, MDPI, vol. 14(4), pages 1-19, February.
    14. Zhumei Luo & Cong Nie & Shunli Lv & Tao Guo & Suoming Gao, 2022. "The Effect of J-Groove on Vortex Suppression and Energy Dissipation in a Draft Tube of Francis Turbine," Energies, MDPI, vol. 15(5), pages 1-20, February.
    15. Song, Xijie & Liu, Chao, 2021. "Experimental study of the floor-attached vortices in pump sump using V3V," Renewable Energy, Elsevier, vol. 164(C), pages 752-766.
    16. Arispe, Tania M. & de Oliveira, Waldir & Ramirez, Ramiro G., 2018. "Francis turbine draft tube parameterization and analysis of performance characteristics using CFD techniques," Renewable Energy, Elsevier, vol. 127(C), pages 114-124.
    17. Lei Wang & Jiayi Cui & Lingfeng Shu & Denghui Jiang & Chun Xiang & Linwei Li & Peijian Zhou, 2022. "Research on the Vortex Rope Control Techniques in Draft Tube of Francis Turbines," Energies, MDPI, vol. 15(24), pages 1-27, December.
    18. Zhou, Xing & Hu, Xinyi & Huang, Quanshui & Wu, Hegao & Tang, Xiaodan & Cervantes, Michel J., 2024. "Optimization design of an innovative francis draft tube: Insight into improving operational flexibility," Energy, Elsevier, vol. 299(C).
    19. Yu, An & Wang, Yongshuai & Tang, Qinghong & Lv, Ruirui & Yang, Zhongpo, 2021. "Investigation of the vortex evolution and hydraulic excitation in a pump-turbine operating at different conditions," Renewable Energy, Elsevier, vol. 171(C), pages 462-478.
    20. Zhou, Xing & Shi, Changzheng & Miyagawa, Kazuyoshi & Wu, Hegao, 2021. "Effect of modified draft tube with inclined conical diffuser on flow instabilities in Francis turbine," Renewable Energy, Elsevier, vol. 172(C), pages 606-617.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:13:y:2020:i:11:p:2806-:d:366070. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.