IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v13y2020i11p2800-d366028.html
   My bibliography  Save this article

Inkjet 3D Printed MEMS Vibrational Electromagnetic Energy Harvester

Author

Listed:
  • Bartosz Kawa

    (Department of Microsystems, Wroclaw University of Science and Technology, 50370 Wroclaw, Poland)

  • Krzysztof Śliwa

    (Department of Microsystems, Wroclaw University of Science and Technology, 50370 Wroclaw, Poland)

  • Vincent Ch. Lee

    (Department of Electrical and Computer Engineering, National University of Singapore, Singapore 117608, Singapore)

  • Qiongfeng Shi

    (Department of Electrical and Computer Engineering, National University of Singapore, Singapore 117608, Singapore)

  • Rafał Walczak

    (Department of Microsystems, Wroclaw University of Science and Technology, 50370 Wroclaw, Poland)

Abstract

Three-dimensional (3D) printing is a powerful tool that enables the printing of almost unlimited geometry in a few hours, from a virtual design to a real structure. In this paper, we present a micro-electromechanical energy harvester that utilized a 3D printed micromechanical structure combined with a miniature permanent magnet and a microelectronic coil towards a hybrid electromagnetic vibrational hybrid energy harvester. Various micromechanical structure geometries were designed, printed, and tested. The characteristic dimensions of the springs were from 200 μm to 400 μm and the total volume of the devices was below 1 cm 3 . The resonant frequencies (95–340 Hz range), as well as bandwidths (6–23 Hz range), for the developed prototypes were determined. The maximal generated output power was almost 24 μW with a power density up to almost 600 μW/cm 3 .

Suggested Citation

  • Bartosz Kawa & Krzysztof Śliwa & Vincent Ch. Lee & Qiongfeng Shi & Rafał Walczak, 2020. "Inkjet 3D Printed MEMS Vibrational Electromagnetic Energy Harvester," Energies, MDPI, vol. 13(11), pages 1-10, June.
    • Handle: RePEc:gam:jeners:v:13:y:2020:i:11:p:2800-:d:366028
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/13/11/2800/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/13/11/2800/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Ju, Suna & Ji, Chang-Hyeon, 2018. "Impact-based piezoelectric vibration energy harvester," Applied Energy, Elsevier, vol. 214(C), pages 139-151.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Bartosz Kawa & Chengkuo Lee & Rafał Walczak, 2022. "Inkjet 3D Printed MEMS Electromagnetic Multi-Frequency Energy Harvester," Energies, MDPI, vol. 15(12), pages 1-11, June.
    2. Philipp Gawron & Thomas M. Wendt & Lukas Stiglmeier & Nikolai Hangst & Urban B. Himmelsbach, 2021. "A Review on Kinetic Energy Harvesting with Focus on 3D Printed Electromagnetic Vibration Harvesters," Energies, MDPI, vol. 14(21), pages 1-24, October.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Khazaee, Majid & Huber, John E. & Rosendahl, Lasse & Rezania, Alireza, 2021. "The investigation of viscous and structural damping for piezoelectric energy harvesters using only time-domain voltage measurements," Applied Energy, Elsevier, vol. 285(C).
    2. Zhao, Dong & Liu, Ying, 2020. "A prototype for light-electric harvester based on light sensitive liquid crystal elastomer cantilever," Energy, Elsevier, vol. 198(C).
    3. Toyabur Rahman, M. & Sohel Rana, SM & Salauddin, Md. & Maharjan, Pukar & Bhatta, Trilochan & Kim, Hyunsik & Cho, Hyunok & Park, Jae Yeong, 2020. "A highly miniaturized freestanding kinetic-impact-based non-resonant hybridized electromagnetic-triboelectric nanogenerator for human induced vibrations harvesting," Applied Energy, Elsevier, vol. 279(C).
    4. Hassan Elahi & Marco Eugeni & Paolo Gaudenzi, 2018. "A Review on Mechanisms for Piezoelectric-Based Energy Harvesters," Energies, MDPI, vol. 11(7), pages 1-35, July.
    5. Li, Zhongjie & Yang, Zhengbao & Naguib, Hani E., 2020. "Introducing revolute joints into piezoelectric energy harvesters," Energy, Elsevier, vol. 192(C).
    6. Wang, Shuyun & Yang, Zemeng & Kan, Junwu & Chen, Song & Chai, Chaohui & Zhang, Zhonghua, 2021. "Design and characterization of an amplitude-limiting rotational piezoelectric energy harvester excited by a radially dragged magnetic force," Renewable Energy, Elsevier, vol. 177(C), pages 1382-1393.
    7. Maria Joseph Raj, Nirmal Prashanth & Alluri, Nagamalleswara Rao & Vivekananthan, Venkateswaran & Chandrasekhar, Arunkumar & Khandelwal, Gaurav & Kim, Sang-Jae, 2018. "Sustainable yarn type-piezoelectric energy harvester as an eco-friendly, cost-effective battery-free breath sensor," Applied Energy, Elsevier, vol. 228(C), pages 1767-1776.
    8. Aldawood, Ghufran & Nguyen, Hieu Tri & Bardaweel, Hamzeh, 2019. "High power density spring-assisted nonlinear electromagnetic vibration energy harvester for low base-accelerations," Applied Energy, Elsevier, vol. 253(C), pages 1-1.
    9. Bartosz Kawa & Chengkuo Lee & Rafał Walczak, 2022. "Inkjet 3D Printed MEMS Electromagnetic Multi-Frequency Energy Harvester," Energies, MDPI, vol. 15(12), pages 1-11, June.
    10. Wang, Shuai & Wang, Chaohui & Gao, Zhiwei & Cao, Hongyun, 2020. "Design and performance of a cantilever piezoelectric power generation device for real-time road safety warnings," Applied Energy, Elsevier, vol. 276(C).
    11. Gao, Mingyuan & Wang, Yuan & Wang, Yifeng & Wang, Ping, 2018. "Experimental investigation of non-linear multi-stable electromagnetic-induction energy harvesting mechanism by magnetic levitation oscillation," Applied Energy, Elsevier, vol. 220(C), pages 856-875.
    12. Zhang, Jinhui & Qin, Lifeng, 2019. "A tunable frequency up-conversion wideband piezoelectric vibration energy harvester for low-frequency variable environment using a novel impact- and rope-driven hybrid mechanism," Applied Energy, Elsevier, vol. 240(C), pages 26-34.
    13. He, Jian & Fan, Xueming & Mu, Jiliang & Wang, Chao & Qian, Jichao & Li, Xiucheng & Hou, Xiaojuan & Geng, Wenping & Wang, Xiangdong & Chou, Xiujian, 2020. "3D full-space triboelectric-electromagnetic hybrid nanogenerator for high-efficient mechanical energy harvesting in vibration system," Energy, Elsevier, vol. 194(C).
    14. Luo, Anxin & Zhang, Yulong & Dai, Xiangtian & Wang, Yifan & Xu, Weihan & Lu, Yan & Wang, Min & Fan, Kangqi & Wang, Fei, 2020. "An inertial rotary energy harvester for vibrations at ultra-low frequency with high energy conversion efficiency," Applied Energy, Elsevier, vol. 279(C).
    15. Tri Nguyen, Hieu & Genov, Dentcho A. & Bardaweel, Hamzeh, 2020. "Vibration energy harvesting using magnetic spring based nonlinear oscillators: Design strategies and insights," Applied Energy, Elsevier, vol. 269(C).
    16. Johar, Muhammad Ali & Kang, Jin-Ho & Hassan, Mostafa Afifi & Ryu, Sang-Wan, 2018. "A scalable, flexible and transparent GaN based heterojunction piezoelectric nanogenerator for bending, air-flow and vibration energy harvesting," Applied Energy, Elsevier, vol. 222(C), pages 781-789.
    17. Kim, Jae Woo & Salauddin, Md & Cho, Hyunok & Rasel, M. Salauddin & Park, Jae Yeong, 2019. "Electromagnetic energy harvester based on a finger trigger rotational gear module and an array of disc Halbach magnets," Applied Energy, Elsevier, vol. 250(C), pages 776-785.
    18. Jiqiang Liu & Junjie Yang & Ruofeng Han & Qisheng He & Dacheng Xu & Xinxin Li, 2020. "Improved Interface Circuit for Enhancing the Power Output of a Vibration-Threshold-Triggered Piezoelectric Energy Harvester," Energies, MDPI, vol. 13(15), pages 1-17, July.
    19. Damien Hoareau & Gurvan Jodin & Abdo-rahmane Anas Laaraibi & Jacques Prioux & Florence Razan, 2023. "Available Kinetic Energy Sources on the Human Body during Sports Activities: A Numerical Approach Based on Accelerometers for Cantilevered Piezoelectric Harvesters," Energies, MDPI, vol. 16(6), pages 1-20, March.
    20. Abdelkareem, Mohamed A.A. & Xu, Lin & Ali, Mohamed Kamal Ahmed & Elagouz, Ahmed & Mi, Jia & Guo, Sijing & Liu, Yilun & Zuo, Lei, 2018. "Vibration energy harvesting in automotive suspension system: A detailed review," Applied Energy, Elsevier, vol. 229(C), pages 672-699.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:13:y:2020:i:11:p:2800-:d:366028. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.