IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v173y2021icp92-104.html
   My bibliography  Save this article

Solar collector with asymmetric compound parabolic concentrator for winter energy harvesting and summer overheating reduction: Concept and prototype device

Author

Listed:
  • Chen, Xiaomeng
  • Yang, Xudong

Abstract

A major technical barrier of solar water heating systems for space heating and domestic water usage is the mismatch between the seasonal availability of solar energy and demand loads. The resulting low solar fraction in winter and high risk of overheating in summer reduces the competitiveness of this technology. Aiming to solve this problem, a novel collector module which combines asymmetric compound parabolic reflector with horizontally aligned evacuated tubular absorber is proposed in this paper. The special configuration enables the reflector to realize the seasonal dual function which performs as a concentrator in winter and a shading device in summer. This collector design can achieve high thermal performance during winter when demand is high and lower the efficiency in summer when demand is low. Based on the design principle, a prototype device was fabricated. Its photo-thermal behavior was investigated by the numerical approach as well as the experimental approach under real outdoor conditions on summer and winter days. Both theoretical and experimental results revealed that the prototype device has a high average optical efficiency on clear December days of 0.70, whereas it maintained low average optical efficiency of 0.39 on clear August days. In addition, the daily thermal efficiency remained above 0.5 for a large temperature difference between the fluid and ambient air at 77 K during the testing days around the winter solstice. These results confirmed that this solar unit achieves satisfactory performance in winter and also reduces the overheating risk in summer.

Suggested Citation

  • Chen, Xiaomeng & Yang, Xudong, 2021. "Solar collector with asymmetric compound parabolic concentrator for winter energy harvesting and summer overheating reduction: Concept and prototype device," Renewable Energy, Elsevier, vol. 173(C), pages 92-104.
    • Handle: RePEc:eee:renene:v:173:y:2021:i:c:p:92-104
    DOI: 10.1016/j.renene.2021.03.119
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148121004754
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2021.03.119?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Guo, Junfei & Liu, Zhan & Yang, Bo & Yang, Xiaohu & Yan, Jinyue, 2022. "Melting assessment on the angled fin design for a novel latent heat thermal energy storage tube," Renewable Energy, Elsevier, vol. 183(C), pages 406-422.
    2. Liu, Yang & Gui, Qinghua & Xiao, Liye & Zheng, Canyang & Zhang, Youyang & Chen, Fei, 2023. "Photothermal conversion performance based on optimized design of multi-section compound parabolic concentrator," Renewable Energy, Elsevier, vol. 209(C), pages 286-297.
    3. Zhang, Xueyan & Gao, Teng & Liu, Yang & Chen, Fei, 2023. "Construction and concentrating performance of a critically truncated compound parabolic concentrator without light escape," Energy, Elsevier, vol. 269(C).
    4. Zhang, Xueyan & Jiang, Shuoxun & Lin, Ziming & Gui, Qinghua & Chen, Fei, 2023. "Model construction and performance analysis for asymmetric compound parabolic concentrator with circular absorber," Energy, Elsevier, vol. 267(C).
    5. Gong, Jing-hu & Zhang, Zhi-peng & Sun, Zhi-hao & Wang, Yu-guang & Wang, Jun & Lund, Peter D., 2023. "Thermal and thermo-mechanical analysis of a novel pass-through all-glass evacuated collector tube by combining experiment with numerical simulation," Energy, Elsevier, vol. 277(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:173:y:2021:i:c:p:92-104. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.