IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v139y2019icp600-610.html
   My bibliography  Save this article

Numerical studies of co-axial travelling-wave thermoacoustic cooler powered by standing-wave thermoacoustic engine

Author

Listed:
  • Saechan, Patcharin
  • Jaworski, Artur J.

Abstract

Design and optimisation of a co-axial travelling-wave thermoacoustic cooler (TWTC) powered by a standing-wave thermoacoustic engine (SWTE) is conducted based on the linear thermoacoustic theory. The target application is storage of medical supplies in rural communities of developing countries with no access to electricity grid, where waste heat from cooking can be used as energy input. The design is guided by construction simplicity and low cost. Thus the SWTE/TWTC coupling is enclosed in a constant-diameter resonator which accommodates a compact co-axial configuration of the TWTC. Following earlier experiments, working fluid is air at 10 bar, and operating frequency is 50 Hz. Parameters such as the ratio of the cross-sectional area of the cooler to feedback inertance and stack and regenerator geometries, have been optimised for maximum system efficiency. Here, at the target input power of 600 W a drive ratio of 7.75% can be obtained, leading to the cooling load of 133 W at 250 K. This corresponds to the SWTE thermal-to-acoustic efficiency of 17% and TWTC COP of 1.9, and the combined efficiency of 22.2%. The simulations are to inform the build of an enhanced prototype of the proposed device. A detailed discussion and guidelines for practical builds are provided.

Suggested Citation

  • Saechan, Patcharin & Jaworski, Artur J., 2019. "Numerical studies of co-axial travelling-wave thermoacoustic cooler powered by standing-wave thermoacoustic engine," Renewable Energy, Elsevier, vol. 139(C), pages 600-610.
    • Handle: RePEc:eee:renene:v:139:y:2019:i:c:p:600-610
    DOI: 10.1016/j.renene.2019.02.059
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148119302137
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2019.02.059?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Jouhara, Hussam & Almahmoud, Sulaiman & Chauhan, Amisha & Delpech, Bertrand & Bianchi, Giuseppe & Tassou, Savvas A. & Llera, Rocio & Lago, Francisco & Arribas, Juan José, 2017. "Experimental and theoretical investigation of a flat heat pipe heat exchanger for waste heat recovery in the steel industry," Energy, Elsevier, vol. 141(C), pages 1928-1939.
    2. Delpech, Bertrand & Milani, Massimo & Montorsi, Luca & Boscardin, Davide & Chauhan, Amisha & Almahmoud, Sulaiman & Axcell, Brian & Jouhara, Hussam, 2018. "Energy efficiency enhancement and waste heat recovery in industrial processes by means of the heat pipe technology: Case of the ceramic industry," Energy, Elsevier, vol. 158(C), pages 656-665.
    3. Li, Linyu & Wu, Zhanghua & Hu, Jianying & Yu, Guoyao & Luo, Ercang & Dai, Wei, 2016. "A novel heat-driven thermoacoustic natural gas liquefaction system. Part I: Coupling between refrigerator and linear motor," Energy, Elsevier, vol. 117(P2), pages 523-529.
    4. Hu, J.Y. & Luo, E.C. & Zhang, L.M. & Chen, Y.Y. & Wu, Z.H. & Gao, B., 2018. "Analysis of a displacer-coupled multi-stage thermoacoustic-Stirling engine," Energy, Elsevier, vol. 145(C), pages 507-514.
    5. Abdoulla-Latiwish, Kalid O.A. & Mao, Xiaoan & Jaworski, Artur J., 2017. "Thermoacoustic micro-electricity generator for rural dwellings in developing countries driven by waste heat from cooking activities," Energy, Elsevier, vol. 134(C), pages 1107-1120.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Remiorz, Leszek & Wiciak, Grzegorz & Grzywnowicz, Krzysztof, 2019. "Novel concept of supporting the membrane separation of CO2 in power plants by thermoacoustic dehumidification," Energy, Elsevier, vol. 189(C).
    2. Ahmad, Lujean & Khordehgah, Navid & Malinauskaite, Jurgita & Jouhara, Hussam, 2020. "Recent advances and applications of solar photovoltaics and thermal technologies," Energy, Elsevier, vol. 207(C).
    3. Carmen Iniesta & José Luis Olazagoitia & Jordi Vinolas & Jaime Gros, 2019. "Energy and Efficiency Evaluation of Feedback Branch Design in Thermoacoustic Stirling-Like Engines," Energies, MDPI, vol. 12(20), pages 1-15, October.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ahmed Hamood & Artur J. Jaworski & Xiaoan Mao, 2019. "Development and Assessment of Two-Stage Thermoacoustic Electricity Generator," Energies, MDPI, vol. 12(9), pages 1-18, May.
    2. Delpech, Bertrand & Axcell, Brian & Jouhara, Hussam, 2019. "Experimental investigation of a radiative heat pipe for waste heat recovery in a ceramics kiln," Energy, Elsevier, vol. 170(C), pages 636-651.
    3. Xu, Jingyuan & Luo, Ercang & Hochgreb, Simone, 2021. "A thermoacoustic combined cooling, heating, and power (CCHP) system for waste heat and LNG cold energy recovery," Energy, Elsevier, vol. 227(C).
    4. Chen, Geng & Tang, Lihua & Mace, Brian & Yu, Zhibin, 2021. "Multi-physics coupling in thermoacoustic devices: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 146(C).
    5. Łukasz Amanowicz, 2020. "Controlling the Thermal Power of a Wall Heating Panel with Heat Pipes by Changing the Mass Flowrate and Temperature of Supplying Water—Experimental Investigations," Energies, MDPI, vol. 13(24), pages 1-18, December.
    6. Jouhara, Hussam & Almahmoud, Sulaiman & Brough, Daniel & Guichet, Valentin & Delpech, Bertrand & Chauhan, Amisha & Ahmad, Lujean & Serey, Nicolas, 2021. "Experimental and theoretical investigation of the performance of an air to water multi-pass heat pipe-based heat exchanger," Energy, Elsevier, vol. 219(C).
    7. Almahmoud, Sulaiman & Jouhara, Hussam, 2019. "Experimental and theoretical investigation on a radiative flat heat pipe heat exchanger," Energy, Elsevier, vol. 174(C), pages 972-984.
    8. Miguel Castro Oliveira & Muriel Iten & Pedro L. Cruz & Helena Monteiro, 2020. "Review on Energy Efficiency Progresses, Technologies and Strategies in the Ceramic Sector Focusing on Waste Heat Recovery," Energies, MDPI, vol. 13(22), pages 1-24, November.
    9. Kisha, Wigdan & Riley, Paul & McKechnie, Jon & Hann, David, 2021. "Asymmetrically heated multi-stage travelling-wave thermoacoustic electricity generator," Energy, Elsevier, vol. 235(C).
    10. Lisa Branchini & Maria Chiara Bignozzi & Benedetta Ferrari & Barbara Mazzanti & Saverio Ottaviano & Marcello Salvio & Claudia Toro & Fabrizio Martini & Andrea Canetti, 2021. "Cogeneration Supporting the Energy Transition in the Italian Ceramic Tile Industry," Sustainability, MDPI, vol. 13(7), pages 1-17, April.
    11. Elhawary, M.A. & Ibrahim, Abdelmaged H. & Sabry, Ashraf S. & Abdel-Rahman, Ehab, 2020. "Experimental study of a small scale bi-directional axial impulse turbine for acoustic-to-mechanical power conversion," Renewable Energy, Elsevier, vol. 159(C), pages 414-426.
    12. Furszyfer Del Rio, Dylan D. & Sovacool, Benjamin K. & Foley, Aoife M. & Griffiths, Steve & Bazilian, Morgan & Kim, Jinsoo & Rooney, David, 2022. "Decarbonizing the ceramics industry: A systematic and critical review of policy options, developments and sociotechnical systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 157(C).
    13. Ortega-Fernández, Iñigo & Rodríguez-Aseguinolaza, Javier, 2019. "Thermal energy storage for waste heat recovery in the steelworks: The case study of the REslag project," Applied Energy, Elsevier, vol. 237(C), pages 708-719.
    14. Hesham Alhumade & Iqbal Ahmed Moujdin & Saad Al-Shahrani, 2023. "Increasing Output Power of a Microfluidic Fuel Cell Using Fuzzy Modeling and Jellyfish Search Optimization," Sustainability, MDPI, vol. 15(14), pages 1-15, July.
    15. Llera, Rocio & Vigil, Miguel & Díaz-Díaz, Sara & Martínez Huerta, Gemma Marta, 2022. "Prospective environmental and techno-economic assessment of steam production by means of heat pipes in the steel industry," Energy, Elsevier, vol. 239(PD).
    16. Khayyam, Hamid & Naebe, Minoo & Milani, Abbas S. & Fakhrhoseini, Seyed Mousa & Date, Abhijit & Shabani, Bahman & Atkiss, Steve & Ramakrishna, Seeram & Fox, Bronwyn & Jazar, Reza N., 2021. "Improving energy efficiency of carbon fiber manufacturing through waste heat recovery: A circular economy approach with machine learning," Energy, Elsevier, vol. 225(C).
    17. Hamood, Ahmed & Jaworski, Artur J. & Mao, Xiaoan & Simpson, Kevin, 2018. "Design and construction of a two-stage thermoacoustic electricity generator with push-pull linear alternator," Energy, Elsevier, vol. 144(C), pages 61-72.
    18. Huang, Qionghai & Shao, Shuangquan & Zhang, Hainan & Tian, Changqing, 2019. "Development and composition of a data center heat recovery system and evaluation of annual operation performance," Energy, Elsevier, vol. 189(C).
    19. Bi, Tianjiao & Wu, Zhanghua & Chen, Wei & Zhang, Limin & Luo, Ercang & Zhang, Bin, 2022. "Numerical and experimental research on a high-power 4-stage looped travelling-wave thermoacoustic electric generator," Energy, Elsevier, vol. 239(PB).
    20. Malinauskaite, Jurgita & Jouhara, Hussam & Egilegor, Bakartxo & Al-Mansour, Fouad & Ahmad, Lujean & Pusnik, Matevz, 2020. "Energy efficiency in the industrial sector in the EU, Slovenia, and Spain," Energy, Elsevier, vol. 208(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:139:y:2019:i:c:p:600-610. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.