IDEAS home Printed from https://ideas.repec.org/a/eee/reensy/v104y2012icp84-95.html
   My bibliography  Save this article

Introducing buffer inventories in the RBD analysis of process production systems

Author

Listed:
  • Macchi, Marco
  • Kristjanpoller, Fredy
  • Garetti, Marco
  • Arata, Adolfo
  • Fumagalli, Luca

Abstract

The throughput analysis is an important issue for the design and operations management of process production lines. The throughput of a line depends on the availability and nominal throughput of its machines. Further on, it is influenced by the accumulation process of production material stocked into buffers along the line; hence, the buffer inventory level is also a relevant variable that has to be considered when assessing the throughput of the line. The present paper is particularly concerned with using such an assessment for supporting maintenance decisions. The buffer inventory level should provide the proper isolation time before the buffer becomes empty, so that, during this time, a maintenance intervention can be carried on at a failed machine upward, without causing a propagation of the effect of the failure in the machines downward (the so called ‘material starvation’). Alike, it should guarantee the proper isolation time before reaching the complete utilisation of the buffer capacity, so that also during this time a maintenance intervention is possible at a failed machine downward without causing a propagation of the effect of the failure in the machines upward (the so called ‘blocking of production’). This strategy is particularly interesting in the process industry where the capital cost of equipment is high and the holding cost of material is low. Hence, the isolation times before reaching ‘material starvation’ or ‘blocking of production’ have to be properly studied in order to make an accurate analysis of their effect on the throughput of the line. The present paper provides a model to this end, derived by extending the well known Reliability Block Diagram (RBD) method, currently used in the normal duties of a maintenance engineer. The usual RBD availability analysis is integrated by a state space analysis through which isolation times can be analysed. Besides, an empirical study – the case of a production line taken out from the mining industry – is carried on in order to demonstrate the use of the integrated tool in practice.

Suggested Citation

  • Macchi, Marco & Kristjanpoller, Fredy & Garetti, Marco & Arata, Adolfo & Fumagalli, Luca, 2012. "Introducing buffer inventories in the RBD analysis of process production systems," Reliability Engineering and System Safety, Elsevier, vol. 104(C), pages 84-95.
    • Handle: RePEc:eee:reensy:v:104:y:2012:i:c:p:84-95
    DOI: 10.1016/j.ress.2012.03.015
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S095183201200049X
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ress.2012.03.015?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Horton, Graham & Kulkarni, Vidyadhar G. & Nicol, David M. & Trivedi, Kishor S., 1998. "Fluid stochastic Petri nets: Theory, applications, and solution techniques," European Journal of Operational Research, Elsevier, vol. 105(1), pages 184-201, February.
    2. Papadopoulos, H. T. & Heavey, C., 1996. "Queueing theory in manufacturing systems analysis and design: A classification of models for production and transfer lines," European Journal of Operational Research, Elsevier, vol. 92(1), pages 1-27, July.
    3. Barabady, Javad & Kumar, Uday, 2008. "Reliability analysis of mining equipment: A case study of a crushing plant at Jajarm Bauxite Mine in Iran," Reliability Engineering and System Safety, Elsevier, vol. 93(4), pages 647-653.
    4. Lisnianski, Anatoly, 2007. "Extended block diagram method for a multi-state system reliability assessment," Reliability Engineering and System Safety, Elsevier, vol. 92(12), pages 1601-1607.
    5. Herder, P.M. & van Luijk, J.A. & Bruijnooge, J., 2008. "Industrial application of RAM modeling," Reliability Engineering and System Safety, Elsevier, vol. 93(4), pages 501-508.
    6. Levitin, Gregory, 2007. "Block diagram method for analyzing multi-state systems with uncovered failures," Reliability Engineering and System Safety, Elsevier, vol. 92(6), pages 727-734.
    7. Sorensen, Kenneth & Janssens, Gerrit K., 2004. "A Petri net model of a continuous flow transfer line with unreliable machines," European Journal of Operational Research, Elsevier, vol. 152(1), pages 248-262, January.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Macchi, Marco & Garetti, Marco & Centrone, Domenico & Fumagalli, Luca & Piero Pavirani, Gian, 2012. "Maintenance management of railway infrastructures based on reliability analysis," Reliability Engineering and System Safety, Elsevier, vol. 104(C), pages 71-83.
    2. Belmansour, Ahmed-Tidjani & Nourelfath, Mustapha, 2010. "An aggregation method for performance evaluation of a tandem homogenous production line with machines having multiple failure modes," Reliability Engineering and System Safety, Elsevier, vol. 95(11), pages 1193-1201.
    3. Rajkumar Bhimgonda Patil & Basavraj S Kothavale & Laxman Yadu Waghmode, 2019. "Selection of time-to-failure model for computerized numerical control turning center based on the assessment of trends in maintenance data," Journal of Risk and Reliability, , vol. 233(2), pages 105-117, April.
    4. Barabadi, Abbas & Barabady, Javad & Markeset, Tore, 2014. "Application of reliability models with covariates in spare part prediction and optimization – A case study," Reliability Engineering and System Safety, Elsevier, vol. 123(C), pages 1-7.
    5. Anton Stefanek & Richard A. Hayden & Jeremy T. Bradley, 2016. "Mean-field analysis of hybrid Markov population models with time-inhomogeneous rates," Annals of Operations Research, Springer, vol. 239(2), pages 667-693, April.
    6. Jianing Wu & Shaoze Yan & RX Gao, 2014. "Modeling and analysis of failure propagation of mechanical system with multi-operation states using high-level Petri net," Journal of Risk and Reliability, , vol. 228(4), pages 347-361, August.
    7. Konstantinos S. Boulas & Georgios D. Dounias & Chrissoleon T. Papadopoulos, 2023. "A hybrid evolutionary algorithm approach for estimating the throughput of short reliable approximately balanced production lines," Journal of Intelligent Manufacturing, Springer, vol. 34(2), pages 823-852, February.
    8. Korporaal, R. & Ridder, A.A.N. & Kloprogge, P. & Dekker, R., 1999. "Capacity planning of prisons in the Netherlands," Econometric Institute Research Papers EI 9909-/A, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    9. Jarosław Brodny & Magdalena Tutak, 2019. "Analysing the Utilisation Effectiveness of Mining Machines Using Independent Data Acquisition Systems: A Case Study," Energies, MDPI, vol. 12(13), pages 1-15, June.
    10. Panagiotis H. Tsarouhas & George K. Fourlas, 2016. "Mission reliability estimation of mobile robot system," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 7(2), pages 220-228, June.
    11. Yu, Shui & Wang, Zhonglai & Zhang, Kewang, 2018. "Sequential time-dependent reliability analysis for the lower extremity exoskeleton under uncertainty," Reliability Engineering and System Safety, Elsevier, vol. 170(C), pages 45-52.
    12. Kartick Bhushan & Somnath Chattopadhyaya & Shubham Sharma & Kamal Sharma & Changhe Li & Yanbin Zhang & Elsayed Mohamed Tag Eldin, 2022. "Analyzing Reliability and Maintainability of Crawler Dozer BD155 Transmission Failure Using Markov Method and Total Productive Maintenance: A Novel Case Study for Improvement Productivity," Sustainability, MDPI, vol. 14(21), pages 1-17, November.
    13. Son, Kwang Seop & Seong, Seung Hwan & Kang, Hyun Gook & Jang, Gwi Sook, 2020. "Development of state-based integrated dependability model of RPS in NPPs considering CCF and periodic testing effects at the early design phase," Reliability Engineering and System Safety, Elsevier, vol. 193(C).
    14. Dhouib, K. & Gharbi, A. & Landolsi, N., 2009. "Throughput assessment of mixed-model flexible transfer lines with unreliable machines," International Journal of Production Economics, Elsevier, vol. 122(2), pages 619-627, December.
    15. Levitin, Gregory & Xing, Liudong & Ben-Haim, Hanoch & Dai, Yuanshun, 2011. "Multi-state systems with selective propagated failures and imperfect individual and group protections," Reliability Engineering and System Safety, Elsevier, vol. 96(12), pages 1657-1666.
    16. George Liberopoulos & George Kozanidis & Panagiotis Tsarouhas, 2007. "Performance Evaluation of an Automatic Transfer Line with WIP Scrapping During Long Failures," Manufacturing & Service Operations Management, INFORMS, vol. 9(1), pages 62-83, December.
    17. Sheu, Shey-Huei & Chang, Chin-Chih & Chen, Yen-Luan & George Zhang, Zhe, 2015. "Optimal preventive maintenance and repair policies for multi-state systems," Reliability Engineering and System Safety, Elsevier, vol. 140(C), pages 78-87.
    18. M. López-Campos & F. Kristjanpoller & P. Viveros & R. Pascual, 2018. "Reliability Assessment Methodology for Massive Manufacturing Using Multi-Function Equipment," Complexity, Hindawi, vol. 2018, pages 1-8, February.
    19. Yaghoubi, Saeed & Noori, Siamak & Azaron, Amir & Fynes, Brian, 2015. "Resource allocation in multi-class dynamic PERT networks with finite capacity," European Journal of Operational Research, Elsevier, vol. 247(3), pages 879-894.
    20. Dong, Wenjie & Liu, Sifeng & Tao, Liangyan & Cao, Yingsai & Fang, Zhigeng, 2019. "Reliability variation of multi-state components with inertial effect of deteriorating output performances," Reliability Engineering and System Safety, Elsevier, vol. 186(C), pages 176-185.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:reensy:v:104:y:2012:i:c:p:84-95. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: https://www.journals.elsevier.com/reliability-engineering-and-system-safety .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.