IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v41y2012i1p10-17.html
   My bibliography  Save this article

Prototype of a thermally driven heat pump based on integrated Organic Rankine Cycles (ORC)

Author

Listed:
  • Demierre, J.
  • Henchoz, S.
  • Favrat, D.

Abstract

The concept studied in this work is a low power ORC–ORC heat pump system (providing about 20 kW heat at the condenser) and that is composed of an ORC power cycle driving a reversed ORC heat pump cycle, both cycles using the same fluid. The centrifugal compressor and the radial in-flow turbine are directly coupled on the same shaft rotating on self-acting refrigerant vapor bearings. The system has the advantage of being oil-free, fully hermetic and with low maintenance costs. The paper presents the development of an ORC–ORC prototype, with HFC-134a as working fluid. The main critical parts of the system are the compressor-turbine unit, the supercritical evaporator and the pump. The selected type of heat exchanger for the supercritical evaporation is the double tube coil (DTC). A first experimental setup has been built to test the pump and the supercritical evaporator. A comparison between the results obtained with an in-house supercritical evaporator simulation program and measurements made on the DTC is presented. The design steps of the compressor-turbine are briefly presented. The compressor-turbine unit has been balanced and tested, with air, at speeds up to 140,000 rpm.

Suggested Citation

  • Demierre, J. & Henchoz, S. & Favrat, D., 2012. "Prototype of a thermally driven heat pump based on integrated Organic Rankine Cycles (ORC)," Energy, Elsevier, vol. 41(1), pages 10-17.
  • Handle: RePEc:eee:energy:v:41:y:2012:i:1:p:10-17
    DOI: 10.1016/j.energy.2011.08.049
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544211005895
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2011.08.049?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Schiffmann, J. & Favrat, D., 2010. "Design, experimental investigation and multi-objective optimization of a small-scale radial compressor for heat pump applications," Energy, Elsevier, vol. 35(1), pages 436-450.
    2. Molyneaux, A. & Leyland, G. & Favrat, D., 2010. "Environomic multi-objective optimisation of a district heating network considering centralized and decentralized heat pumps," Energy, Elsevier, vol. 35(2), pages 751-758.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Zeyghami, Mehdi & Goswami, D. Yogi & Stefanakos, Elias, 2015. "A review of solar thermo-mechanical refrigeration and cooling methods," Renewable and Sustainable Energy Reviews, Elsevier, vol. 51(C), pages 1428-1445.
    2. Wu, Dan & Aye, Lu & Ngo, Tuan & Mendis, Priyan, 2017. "Optimisation and financial analysis of an organic Rankine cycle cooling system driven by facade integrated solar collectors," Applied Energy, Elsevier, vol. 185(P1), pages 172-182.
    3. Yi, Zhitong & Luo, Xianglong & Chen, Jianyong & Chen, Ying, 2017. "Mathematical modelling and optimization of a liquid separation condenser-based organic Rankine cycle used in waste heat utilization," Energy, Elsevier, vol. 139(C), pages 916-934.
    4. Sebastián, Andrés & Abbas, Rubén & Valdés, Manuel, 2021. "Analytical prediction of Reynolds-number effects on miniaturized centrifugal compressors under off-design conditions," Energy, Elsevier, vol. 227(C).
    5. Kaczmarczyk, Tomasz Z. & Żywica, Grzegorz & Ihnatowicz, Eugeniusz, 2017. "The impact of changes in the geometry of a radial microturbine stage on the efficiency of the micro CHP plant based on ORC," Energy, Elsevier, vol. 137(C), pages 530-543.
    6. Al-Sayyab, Ali Khalid Shaker & Mota-Babiloni, Adrián & Navarro-Esbrí, Joaquín, 2023. "Performance evaluation of modified compound organic Rankine-vapour compression cycle with two cooling levels, heating, and power generation," Applied Energy, Elsevier, vol. 334(C).
    7. Wang, Y. & Wang, J. & He, W., 2022. "Development of efficient, flexible and affordable heat pumps for supporting heat and power decarbonisation in the UK and beyond: Review and perspectives," Renewable and Sustainable Energy Reviews, Elsevier, vol. 154(C).
    8. Bracco, Roberto & Clemente, Stefano & Micheli, Diego & Reini, Mauro, 2013. "Experimental tests and modelization of a domestic-scale ORC (Organic Rankine Cycle)," Energy, Elsevier, vol. 58(C), pages 107-116.
    9. Zhou, Xia & Fang, Song & Zhang, Hanwei & Xu, Zhuoren & Jiang, Hanying & Rong, Yangyiming & Wang, Kai & Zhi, Xiaoqin & Qiu, Limin, 2023. "Dynamic characteristics of a mechanically coupled organic Rankine-vapor compression system for heat-driven cooling," Energy, Elsevier, vol. 280(C).
    10. Liang, Youcai & Al-Tameemi, Mohammed & Yu, Zhibin, 2018. "Investigation of a gas-fuelled water heater based on combined power and heat pump cycles," Applied Energy, Elsevier, vol. 212(C), pages 1476-1488.
    11. Yang, Kai & Zhang, Hongguang & Wang, Zhen & Zhang, Jian & Yang, Fubin & Wang, Enhua & Yao, Baofeng, 2013. "Study of zeotropic mixtures of ORC (organic Rankine cycle) under engine various operating conditions," Energy, Elsevier, vol. 58(C), pages 494-510.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Menon, Ramanunni P. & Paolone, Mario & Maréchal, François, 2013. "Study of optimal design of polygeneration systems in optimal control strategies," Energy, Elsevier, vol. 55(C), pages 134-141.
    2. Lazzaretto, Andrea & Morandin, Matteo & Toffolo, Andrea, 2012. "Methodological aspects in synthesis of combined sugar and ethanol production plant," Energy, Elsevier, vol. 41(1), pages 165-174.
    3. Bracco, Stefano & Delfino, Federico & Pampararo, Fabio & Robba, Michela & Rossi, Mansueto, 2013. "The University of Genoa smart polygeneration microgrid test-bed facility: The overall system, the technologies and the research challenges," Renewable and Sustainable Energy Reviews, Elsevier, vol. 18(C), pages 442-459.
    4. Roberto Capata & Matteo Saracchini, 2018. "Experimental Campaign Tests on Ultra Micro Gas Turbines, Fuel Supply Comparison and Optimization," Energies, MDPI, vol. 11(4), pages 1-17, March.
    5. Colmenar-Santos, Antonio & Rosales-Asensio, Enrique & Borge-Diez, David & Collado-Fernández, Eduardo, 2016. "Evaluation of the cost of using power plant reject heat in low-temperature district heating and cooling networks," Applied Energy, Elsevier, vol. 162(C), pages 892-907.
    6. Li, Qubo & Piechna, Janusz & Müller, Norbert, 2011. "Numerical simulation of novel axial impeller patterns to compress water vapor as refrigerant," Energy, Elsevier, vol. 36(5), pages 2773-2781.
    7. Olmedo, L.E. & Schiffmann, J., 2023. "Towards a real-time capable hybrid-twin for gas-bearing supported high-speed turbocompressors," Energy, Elsevier, vol. 275(C).
    8. Li, Hongtao & Marechal, Francois & Favrat, Daniel, 2010. "Power and cogeneration technology environomic performance typification in the context of CO2 abatement part I: Power generation," Energy, Elsevier, vol. 35(8), pages 3143-3154.
    9. Pesola, Aki, 2023. "Cost-optimization model to design and operate hybrid heating systems – Case study of district heating system with decentralized heat pumps in Finland," Energy, Elsevier, vol. 281(C).
    10. Ommen, Torben & Markussen, Wiebke Brix & Elmegaard, Brian, 2014. "Comparison of linear, mixed integer and non-linear programming methods in energy system dispatch modelling," Energy, Elsevier, vol. 74(C), pages 109-118.
    11. Diango, A. & Perilhon, C. & Descombes, G. & Danho, E., 2011. "Application of exergy balances for the optimization of non-adiabatic small turbomachines operation," Energy, Elsevier, vol. 36(5), pages 2924-2936.
    12. Huang, Zishuo & Yu, Hang & Peng, Zhenwei & Feng, Yifu, 2017. "Planning community energy system in the industry 4.0 era: Achievements, challenges and a potential solution," Renewable and Sustainable Energy Reviews, Elsevier, vol. 78(C), pages 710-721.
    13. Gerber, Léda & Maréchal, François, 2012. "Environomic optimal configurations of geothermal energy conversion systems: Application to the future construction of Enhanced Geothermal Systems in Switzerland," Energy, Elsevier, vol. 45(1), pages 908-923.
    14. Hou, Qinlong & Zhao, Hongbin & Yang, Xiaoyu, 2018. "Thermodynamic performance study of the integrated MR-SOFC-CCHP system," Energy, Elsevier, vol. 150(C), pages 434-450.
    15. Luo, Xianglong & Zhang, Bingjian & Chen, Ying & Mo, Songping, 2012. "Operational planning optimization of multiple interconnected steam power plants considering environmental costs," Energy, Elsevier, vol. 37(1), pages 549-561.
    16. Uusitalo, Antti & Turunen-Saaresti, Teemu & Honkatukia, Juha & Tiainen, Jonna & Jaatinen-Värri, Ahti, 2020. "Numerical analysis of working fluids for large scale centrifugal compressor driven cascade heat pumps upgrading waste heat," Applied Energy, Elsevier, vol. 269(C).
    17. Raluca Suciu & Paul Stadler & Ivan Kantor & Luc Girardin & François Maréchal, 2019. "Systematic Integration of Energy-Optimal Buildings With District Networks," Energies, MDPI, vol. 12(15), pages 1-38, July.
    18. Tock, Laurence & Maréchal, François, 2012. "Co-production of hydrogen and electricity from lignocellulosic biomass: Process design and thermo-economic optimization," Energy, Elsevier, vol. 45(1), pages 339-349.
    19. Sebastián, Andrés & Abbas, Rubén & Valdés, Manuel, 2021. "Analytical prediction of Reynolds-number effects on miniaturized centrifugal compressors under off-design conditions," Energy, Elsevier, vol. 227(C).
    20. Buoro, D. & Casisi, M. & De Nardi, A. & Pinamonti, P. & Reini, M., 2013. "Multicriteria optimization of a distributed energy supply system for an industrial area," Energy, Elsevier, vol. 58(C), pages 128-137.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:41:y:2012:i:1:p:10-17. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.