IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v36y2011i2p1243-1254.html
   My bibliography  Save this article

Characterizations and photocatalytic activity comparisons of N-doped nc-TiO2 depending on synthetic conditions and structural differences of amine sources

Author

Listed:
  • Diker, Halide
  • Varlikli, Canan
  • Mizrak, Koray
  • Dana, Aykutlu

Abstract

N-doped TiO2 nanoparticles were prepared by using 1° and 2° alkyl and alcohol amines [n-propylamine (nPRYL), ethanolamine (ETOH), propanolamine (PROH), diethylamine (DETYL), dipropylamine (DPRYL), diethanolamine (DETOH), and ammonium hydroxide (NH4OH)] as nitrogen sources through microwave and hydrothermal growth (HT) methods. Characterization of the nanoparticles was done by X-ray diffraction, scanning electron microscopy, ultraviolet–visible absorption spectra, X-ray photoelectron spectroscopy, fourier transform infrared spectroscopy and BET analysis techniques. Nitrogen species in TiO2 lattice were interstitial impurities. Nitrogen content of the particles depended on the preparation conditions and structural differences of nitrogen sources. Photocatalytic degradation of methylene blue was carried out under Xenon lamp irradiation. N-doped TiO2 nanoparticles exhibited higher photocatalytic activity, compared to undoped ones. Acidity differences of amine sources and irradiation differences of synthetic conditions had an effect on photocatalytic activity. Although N doping into TiO2 lattice was the least effective in the particle prepared by the use of nPRYL as the amine source and HT as the synthetic condition, its photocatalytic activity was slightly better compared to others.

Suggested Citation

  • Diker, Halide & Varlikli, Canan & Mizrak, Koray & Dana, Aykutlu, 2011. "Characterizations and photocatalytic activity comparisons of N-doped nc-TiO2 depending on synthetic conditions and structural differences of amine sources," Energy, Elsevier, vol. 36(2), pages 1243-1254.
    • Handle: RePEc:eee:energy:v:36:y:2011:i:2:p:1243-1254
    DOI: 10.1016/j.energy.2010.11.020
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544210006468
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2010.11.020?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Sattler, C. & de Oliveira, L. & Tzschirner, M. & Machado, A.E.H., 2004. "Solar photocatalytic water detoxification of paper mill effluents," Energy, Elsevier, vol. 29(5), pages 835-843.
    2. Yoong, L.S. & Chong, F.K. & Dutta, Binay K., 2009. "Development of copper-doped TiO2 photocatalyst for hydrogen production under visible light," Energy, Elsevier, vol. 34(10), pages 1652-1661.
    3. Ljubas, Davor, 2005. "Solar photocatalysis—a possible step in drinking water treatment," Energy, Elsevier, vol. 30(10), pages 1699-1710.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ojani, Reza & Hasheminejad, Ehteram & Raoof, Jahan Bakhsh, 2015. "Direct growth of 3D flower-like Pt nanostructures by a template-free electrochemical route as an efficient electrocatalyst for methanol oxidation reaction," Energy, Elsevier, vol. 90(P1), pages 1122-1131.
    2. Lin, Jintai & Zeng, Zhi & Ma, Qianmin & Wang, Qianming & Zhang, Yanfen, 2014. "Effects of multiple irradiations on luminescent materials and energy savings – A case study for the synthesis of BaMO4: Ln3+ (M = W, Mo; Ln = Eu, Tb) phosphors," Energy, Elsevier, vol. 64(C), pages 551-556.
    3. Yue, Gentian & Wu, Jihuai & Xiao, Yaoming & Lin, Jianming & Huang, Miaoliang & Lan, Zhang & Fan, Leqing, 2013. "Functionalized graphene/poly(3,4-ethylenedioxythiophene):polystyrenesulfonate as counter electrode catalyst for dye-sensitized solar cells," Energy, Elsevier, vol. 54(C), pages 315-321.
    4. Ju, Jianfeng & Chen, Xi & Shi, Yujun & Wu, Donghui & Hua, Ping, 2013. "A novel TiO2 nanofiber supported PdAg catalyst for methanol electro-oxidation," Energy, Elsevier, vol. 59(C), pages 478-483.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Nair, Ranjith G. & Tripathi, A.M. & Samdarshi, S.K., 2011. "Photocatalytic activity of predominantly rutile mixed phase Ag/TiV oxide nanoparticles under visible light irradiation," Energy, Elsevier, vol. 36(5), pages 3342-3347.
    2. Tasleem, Sehar & Tahir, Muhammad, 2020. "Current trends in strategies to improve photocatalytic performance of perovskites materials for solar to hydrogen production," Renewable and Sustainable Energy Reviews, Elsevier, vol. 132(C).
    3. Bashiri, Robabeh & Mohamed, Norani Muti & Kait, Chong Fai & Sufian, Suriati & Kakooei, Saied & Khatani, Mehboob & Gholami, Zahra, 2016. "Optimization hydrogen production over visible light-driven titania-supported bimetallic photocatalyst from water photosplitting in tandem photoelectrochemical cell," Renewable Energy, Elsevier, vol. 99(C), pages 960-970.
    4. Alami, Abdul Hai & Rajab, Bilal & Abed, Jehad & Faraj, Mohammed & Hawili, Abdullah Abu & Alawadhi, Hussain, 2019. "Investigating various copper oxides-based counter electrodes for dye sensitized solar cell applications," Energy, Elsevier, vol. 174(C), pages 526-533.
    5. Samanta, Ritika & Chakraborty, Rajat, 2023. "Methyl levulinate synthesis from rice husk employing e-waste derived silica supported nano CuO–CdSO4 photocatalyst: Assessment of production environmental impacts, engine performance and emissions," Renewable Energy, Elsevier, vol. 210(C), pages 842-858.
    6. El Naggar, Ahmed M.A. & Gobara, Heba M. & Nassar, Ibrahim M., 2015. "Novel nano-structured for the improvement of photo-catalyzed hydrogen production via water splitting with in-situ nano-carbon formation," Renewable and Sustainable Energy Reviews, Elsevier, vol. 41(C), pages 1205-1216.
    7. Ruban, Priya & Sellappa, Kanmani, 2014. "Development and performance of bench-scale reactor for the photocatalytic generation of hydrogen," Energy, Elsevier, vol. 73(C), pages 926-932.
    8. Nong, Guangzai & Li, Ming & Chen, Yiyi & Zhou, Zongwen & Wang, Shuangfei, 2015. "Simulation of energy conversion in a plant of photocatalysts water splitting for hydrogen fuel," Energy, Elsevier, vol. 81(C), pages 471-476.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:36:y:2011:i:2:p:1243-1254. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.