IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v342y2026ics0360544225053769.html

Numerical simulation of solar-driven biomass pyrolysis for structured biochar production

Author

Listed:
  • Jin, Yuhan
  • Yang, Youwei
  • Chen, Xinyi
  • Wu, Yibo
  • Yu, Jie
  • Shuai, Yong
  • Pan, Ruming

Abstract

With escalating concerns over fossil fuel exhaustion and environmental pollution, the increasing demand for renewable energy technologies has made solar-driven biomass pyrolysis a promising method for producing value-added carbon materials and biofuels. This study proposed a novel solar-driven biomass pyrolysis reactor for producing structured biochar. A comprehensive numerical model of a solar-driven biomass pyrolysis system with solar-thermal-chemical multiphysics coupling was developed to investigate the influence of key parameters on thermal and thermochemical performance. Using a multi-step reaction kinetics model could accurately predict biomass pyrolysis product distribution, thereby improving the yield and uniformity of the structured biochar. The effects of lamp power, heating tube emissivity, and biomass size on temperature evolution, biochar yield, product uniformity, and energy consumption were investigated through parametric analysis. The results indicated that lower lamp power decreased pyrolysis rates but increased biochar yield (from 23.18 % to 30.70 %). Similarly, higher heating tube emissivity accelerated pyrolysis but tended to reduce biochar yield and uniformity. Furthermore, while the biomass aspect ratio had little impact on overall product yields, a lower aspect ratio improved biochar uniformity, and reduced pyrolysis time and energy consumption. The model might offer valuable insights into optimizing solar-driven pyrolysis systems for high-value biochar production.

Suggested Citation

  • Jin, Yuhan & Yang, Youwei & Chen, Xinyi & Wu, Yibo & Yu, Jie & Shuai, Yong & Pan, Ruming, 2026. "Numerical simulation of solar-driven biomass pyrolysis for structured biochar production," Energy, Elsevier, vol. 342(C).
  • Handle: RePEc:eee:energy:v:342:y:2026:i:c:s0360544225053769
    DOI: 10.1016/j.energy.2025.139733
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544225053769
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2025.139733?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to

    for a different version of it.

    References listed on IDEAS

    as
    1. Shoaib Ahmed & Amjad Ali & Alessandro Ciocia & Antonio D’Angola, 2024. "Technological Elements behind the Renewable Energy Community: Current Status, Existing Gap, Necessity, and Future Perspective—Overview," Energies, MDPI, vol. 17(13), pages 1-40, June.
    2. Papari, Sadegh & Hawboldt, Kelly, 2015. "A review on the pyrolysis of woody biomass to bio-oil: Focus on kinetic models," Renewable and Sustainable Energy Reviews, Elsevier, vol. 52(C), pages 1580-1595.
    3. Vennapusa Jagadeeswara Reddy & N. P. Hariram & Mohd Fairusham Ghazali & Sudhakar Kumarasamy, 2024. "Pathway to Sustainability: An Overview of Renewable Energy Integration in Building Systems," Sustainability, MDPI, vol. 16(2), pages 1-36, January.
    4. Pan, Ruming & Yang, Youwei & Lougou, Bachirou Guene & Wu, Lianxuan & Wang, Wei & Guo, Yanming & Shuai, Yong, 2024. "Thermal performance evaluation of a novel solar-driven pyrolysis reactor," Energy, Elsevier, vol. 313(C).
    5. Sánchez, M. & Clifford, B. & Nixon, J.D., 2018. "Modelling and evaluating a solar pyrolysis system," Renewable Energy, Elsevier, vol. 116(PA), pages 630-638.
    6. Germán Navarrete Cereijo & Pedro Galione Klot & Pedro Curto-Risso, 2024. "Two-Stage Global Biomass Pyrolysis Model for Combustion Applications: Predicting Product Composition with a Focus on Kinetics, Energy, and Mass Balances Consistency," Energies, MDPI, vol. 17(19), pages 1-19, October.
    7. Chintala, Venkateswarlu, 2018. "Production, upgradation and utilization of solar assisted pyrolysis fuels from biomass – A technical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 90(C), pages 120-130.
    8. Yuyang Zeng & Tuo Zhou & Tong Wang & Man Zhang & Shuping Zhang & Hairui Yang, 2025. "Long-Duration Energy Storage: A Critical Enabler for Renewable Integration and Decarbonization," Energies, MDPI, vol. 18(3), pages 1-22, January.
    9. Akhtar, Javaid & Saidina Amin, NorAishah, 2012. "A review on operating parameters for optimum liquid oil yield in biomass pyrolysis," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(7), pages 5101-5109.
    10. Kumar, R. & Strezov, V., 2021. "Thermochemical production of bio-oil: A review of downstream processing technologies for bio-oil upgrading, production of hydrogen and high value-added products," Renewable and Sustainable Energy Reviews, Elsevier, vol. 135(C).
    11. Zeng, Kuo & Soria, José & Gauthier, Daniel & Mazza, Germán & Flamant, Gilles, 2016. "Modeling of beech wood pellet pyrolysis under concentrated solar radiation," Renewable Energy, Elsevier, vol. 99(C), pages 721-729.
    12. Hanmin Yang & Ilman Nuran Zaini & Ruming Pan & Yanghao Jin & Yazhe Wang & Lengwan Li & José Juan Bolívar Caballero & Ziyi Shi & Yaprak Subasi & Anissa Nurdiawati & Shule Wang & Yazhou Shen & Tianxiang, 2024. "Distributed electrified heating for efficient hydrogen production," Nature Communications, Nature, vol. 15(1), pages 1-10, December.
    13. Somerville, Michael & Deev, Alexandre, 2020. "The effect of heating rate, particle size and gas flow on the yield of charcoal during the pyrolysis of radiata pine wood," Renewable Energy, Elsevier, vol. 151(C), pages 419-425.
    14. Liu, Shaolin & Ahmadi-Senichault, Azita & Pozzobon, Victor & Lachaud, Jean, 2024. "Multi-scale investigation of heat and momentum transfer in packed-bed TES systems up to 800 K," Applied Energy, Elsevier, vol. 366(C).
    15. Zeng, Kuo & Gauthier, Daniel & Li, Rui & Flamant, Gilles, 2015. "Solar pyrolysis of beech wood: Effects of pyrolysis parameters on the product distribution and gas product composition," Energy, Elsevier, vol. 93(P2), pages 1648-1657.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Weldekidan, Haftom & Strezov, Vladimir & Li, Rui & Kan, Tao & Town, Graham & Kumar, Ravinder & He, Jing & Flamant, Gilles, 2020. "Distribution of solar pyrolysis products and product gas composition produced from agricultural residues and animal wastes at different operating parameters," Renewable Energy, Elsevier, vol. 151(C), pages 1102-1109.
    2. Xie, Yingpu & Zeng, Kuo & Flamant, Gilles & Yang, Haiping & Liu, Nian & He, Xiao & Yang, Xinyi & Nzihou, Ange & Chen, Hanping, 2019. "Solar pyrolysis of cotton stalk in molten salt for bio-fuel production," Energy, Elsevier, vol. 179(C), pages 1124-1132.
    3. Zeng, Kuo & Gauthier, Daniel & Li, Rui & Flamant, Gilles, 2017. "Combined effects of initial water content and heating parameters on solar pyrolysis of beech wood," Energy, Elsevier, vol. 125(C), pages 552-561.
    4. Kaczor, Zuzanna & Buliński, Zbigniew & Werle, Sebastian, 2020. "Modelling approaches to waste biomass pyrolysis: a review," Renewable Energy, Elsevier, vol. 159(C), pages 427-443.
    5. Andrew N. Amenaghawon & Chinedu L. Anyalewechi & Charity O. Okieimen & Heri Septya Kusuma, 2021. "Biomass pyrolysis technologies for value-added products: a state-of-the-art review," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 23(10), pages 14324-14378, October.
    6. Perkins, Greg & Bhaskar, Thallada & Konarova, Muxina, 2018. "Process development status of fast pyrolysis technologies for the manufacture of renewable transport fuels from biomass," Renewable and Sustainable Energy Reviews, Elsevier, vol. 90(C), pages 292-315.
    7. Fahim Ullah & Kamran Hasrat & Mao Mu & Shuang Wang & Sunel Kumar, 2025. "Optimizing Solar–Biomass Pyrolysis: Innovations in Reactor Design and Thermal–Solar System Efficiency," Energies, MDPI, vol. 18(10), pages 1-30, May.
    8. Pan, Ruming & Yang, Youwei & Lougou, Bachirou Guene & Wu, Lianxuan & Wang, Wei & Guo, Yanming & Shuai, Yong, 2024. "Thermal performance evaluation of a novel solar-driven pyrolysis reactor," Energy, Elsevier, vol. 313(C).
    9. Chintala, Venkateswarlu, 2018. "Production, upgradation and utilization of solar assisted pyrolysis fuels from biomass – A technical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 90(C), pages 120-130.
    10. Weldekidan, Haftom & Strezov, Vladimir & Town, Graham, 2018. "Review of solar energy for biofuel extraction," Renewable and Sustainable Energy Reviews, Elsevier, vol. 88(C), pages 184-192.
    11. Hamed, A.S.A. & Yusof, N.I.F.M. & Yahya, M.S. & Cardozo, E. & Munajat, N.F., 2023. "Concentrated solar pyrolysis for oil palm biomass: An exploratory review within the Malaysian context," Renewable and Sustainable Energy Reviews, Elsevier, vol. 188(C).
    12. Al-Rumaihi, Aisha & Shahbaz, Muhammad & Mckay, Gordon & Mackey, Hamish & Al-Ansari, Tareq, 2022. "A review of pyrolysis technologies and feedstock: A blending approach for plastic and biomass towards optimum biochar yield," Renewable and Sustainable Energy Reviews, Elsevier, vol. 167(C).
    13. Alonso, Elisa & Pérez-Rábago, Carlos & Licurgo, Javier & Gallo, Alessandro & Fuentealba, Edward & Estrada, Claudio A., 2017. "Experimental aspects of CuO reduction in solar-driven reactors: Comparative performance of a rotary kiln and a packed-bed," Renewable Energy, Elsevier, vol. 105(C), pages 665-673.
    14. Mika Pahnila & Aki Koskela & Petri Sulasalmi & Timo Fabritius, 2023. "A Review of Pyrolysis Technologies and the Effect of Process Parameters on Biocarbon Properties," Energies, MDPI, vol. 16(19), pages 1-27, October.
    15. Lv, Shihao & Wu, Zhiliang & Yang, Jie & Zhao, Wenjing & Gao, Anjiang & Gao, Wenran & Yu, Yun & Zhang, Shu, 2026. "Pyrolytic oil from biomass, plastics, and tires: Production, properties, and tailored upgrading strategies for sustainable application," Renewable and Sustainable Energy Reviews, Elsevier, vol. 226(PE).
    16. Kabir, G. & Hameed, B.H., 2017. "Recent progress on catalytic pyrolysis of lignocellulosic biomass to high-grade bio-oil and bio-chemicals," Renewable and Sustainable Energy Reviews, Elsevier, vol. 70(C), pages 945-967.
    17. Mishra, Asmita & Siddiqi, Hammad & Kumari, Usha & Behera, Ipsita Dipamitra & Mukherjee, Subhrajit & Meikap, B.C., 2021. "Pyrolysis of waste lubricating oil/waste motor oil to generate high-grade fuel oil: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 150(C).
    18. Chen, Wei-Hsin & Lin, Bo-Jhih, 2016. "Characteristics of products from the pyrolysis of oil palm fiber and its pellets in nitrogen and carbon dioxide atmospheres," Energy, Elsevier, vol. 94(C), pages 569-578.
    19. Ahmed, Gaffer & Kishore, Nanda, 2024. "Synergistic effects on properties of biofuel and biochar produced through co-feed pyrolysis of Erythrina indica and Azadirachta indica biomass," Renewable Energy, Elsevier, vol. 227(C).
    20. Chidebe Stanley Anyanwu & Oluwadayomi Akinsooto & Olorunshogo Benjamin Ogundipe & Samuel Ikemba, 2024. "Net-Zero Energy Buildings: A Path To Sustainable Living," Engineering Heritage Journal (GWK), Zibeline International Publishing, vol. 8(2), pages 107-113, October.

    More about this item

    Keywords

    ;
    ;
    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:342:y:2026:i:c:s0360544225053769. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.