IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v267y2023ics0360544222033618.html
   My bibliography  Save this article

Experimental study on pollutant emission characteristics of diesel urea-based selective catalytic reduction system based on corrugated substrate

Author

Listed:
  • Zhao, Qiaonan
  • Yang, Qiguo
  • Xu, Hongtao
  • Jiao, Anyao
  • Pan, Donghui

Abstract

In this study, a corrugated substrate of diesel engines for urea-based selective catalytic reduction (urea-SCR) with V2O5-WO3/TiO2 (V-SCR) and Cu-based (Cu-SCR) catalysts is proposed and the effects of the ammonia-to-nitrogen ratio α on the NOx emission, NH3 slip, and N2O emission were experimentally investigated on a diesel engine test bench with the World Harmonized Transient Cycle (WHTC). The volume ratio of the catalyst to the engine capacity is 1.6. With the increase of α, the NOx reduction reaction of V-SCR performed better NOx emission characteristics than that of Cu-SCR. When α increased from 1.0 to 1.2, the NOx emission of V-SCR and Cu-SCR decreased from 0.44 to 0.26 g/kW·h and from 0.63 to 0.36 g/kW·h, respectively. However, the NH3 slip of Cu-SCR was less because of its absorption capacity of NH3. The NOx conversion efficiency β and N2 selectivity δ of V-SCR outperformed those of Cu-SCR. At α = 1.1, β and δ of V-SCR were 1.07% and 3.25% higher than those of Cu-SCR, respectively. The dynamic response of V-SCR to NH3 showed high competitiveness compared to Cu-SCR. It was concluded that, based on the corrugated substrate, the V-SCR showed better pollutant emission characteristics than did the Cu-SCR.

Suggested Citation

  • Zhao, Qiaonan & Yang, Qiguo & Xu, Hongtao & Jiao, Anyao & Pan, Donghui, 2023. "Experimental study on pollutant emission characteristics of diesel urea-based selective catalytic reduction system based on corrugated substrate," Energy, Elsevier, vol. 267(C).
    • Handle: RePEc:eee:energy:v:267:y:2023:i:c:s0360544222033618
    DOI: 10.1016/j.energy.2022.126475
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544222033618
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2022.126475?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Tan, Pi-qiang & Wang, Shi-yan & Hu, Zhi-yuan & Lou, Di-ming, 2019. "Durability of V2O5-WO3/TiO2 selective catalytic reduction catalysts for heavy-duty diesel engines using B20 blend fuel," Energy, Elsevier, vol. 179(C), pages 383-391.
    2. Rashidi, Saman & Kashefi, Mohammad Hossein & Kim, Kyung Chun & Samimi-Abianeh, Omid, 2019. "Potentials of porous materials for energy management in heat exchangers – A comprehensive review," Applied Energy, Elsevier, vol. 243(C), pages 206-232.
    3. Zhang, Wei & Wang, Suilin & Mu, Lianbo & Jamshidnia, Hamid & Zhao, Xudong, 2022. "Investigation of the forced-convection heat-transfer in the boiler flue-gas heat recovery units employing the real-time measured database," Energy, Elsevier, vol. 238(PA).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Yang, Huayu & Zhang, Yuhao & Gao, Wenhua & Yan, Bowen & Zhao, Jianxin & Zhang, Hao & Chen, Wei & Fan, Daming, 2021. "Steam replacement strategy using microwave resonance: A future system for continuous-flow heating applications," Applied Energy, Elsevier, vol. 283(C).
    2. Liqiang Xu & Qiufang Cui & Te Tu & Shuo Liu & Long Ji & Shuiping Yan, 2020. "Waste heat recovery from the stripped gas in carbon capture process by membrane technology: Hydrophobic and hydrophilic organic membrane cases," Greenhouse Gases: Science and Technology, Blackwell Publishing, vol. 10(2), pages 421-435, April.
    3. Natalia Rydalina & Elena Antonova & Irina Akhmetova & Svetlana Ilyashenko & Olga Afanaseva & Vincenzo Bianco & Alexander Fedyukhin, 2020. "Analysis of the Efficiency of Using Heat Exchangers with Porous Inserts in Heat and Gas Supply Systems," Energies, MDPI, vol. 13(22), pages 1-13, November.
    4. Yang, Hongxing & Shi, Wenchao & Chen, Yi & Min, Yunran, 2021. "Research development of indirect evaporative cooling technology: An updated review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 145(C).
    5. Lianbo Mu & Suilin Wang & Guichang Liu & Junhui Lu & Yuncheng Lan & Liqiu Zhao & Jincheng Liu, 2023. "On-Site Experimental Study on Low-Temperature Deep Waste Heat Recovery of Actual Flue Gas from the Reformer of Hydrogen Production," Sustainability, MDPI, vol. 15(12), pages 1-19, June.
    6. Chen, Tianyu & Shu, Gequn & Tian, Hua & Zhao, Tingting & Zhang, Hongfei & Zhang, Zhao, 2020. "Performance evaluation of metal-foam baffle exhaust heat exchanger for waste heat recovery," Applied Energy, Elsevier, vol. 266(C).
    7. Mu, Lianbo & Wang, Suilin & Lu, Junhui & Liu, Guichang & Zhao, Liqiu & Lan, Yuncheng, 2023. "Effect of flue gas condensing waste heat recovery and its pressure drop on energy saving and carbon reduction for refinery heating furnace," Energy, Elsevier, vol. 279(C).
    8. Qian Chen & Muhammad Burhan & M Kum Ja & Muhammad Wakil Shahzad & Doskhan Ybyraiymkul & Hongfei Zheng & Xin Cui & Kim Choon Ng, 2022. "Hybrid Indirect Evaporative Cooling-Mechanical Vapor Compression System: A Mini-Review," Energies, MDPI, vol. 15(20), pages 1-17, October.
    9. Marina Astanina & Mikhail Sheremet & U. S. Mahabaleshwar & Jitender Singh, 2020. "Effect of Porous Medium and Copper Heat Sink on Cooling of Heat-Generating Element," Energies, MDPI, vol. 13(10), pages 1-15, May.
    10. Cheng, Gong & Wang, Zhangzhou & Wang, Xinzhi & He, Yurong, 2022. "All-climate thermal management structure for batteries based on expanded graphite/polymer composite phase change material with a high thermal and electrical conductivity," Applied Energy, Elsevier, vol. 322(C).
    11. Hongyan Lu & Lixin Yang & Zhiyong Wu & Siqi Xu, 2020. "Numerical and Experimental Study on Convective Heat Transfer Characteristics in Foam Materials," Energies, MDPI, vol. 13(2), pages 1-14, January.
    12. Dezhi Jiang & Haoxian Yu & Zhihan Wang & Adam Glowacz & Grzegorz Królczyk & Zhixiong Li, 2022. "Influence of Exhaust Temperature and Flow Velocity of Marine Diesel Engines on Exhaust Gas Boiler Heat Transfer Performance," Sustainability, MDPI, vol. 15(1), pages 1-15, December.
    13. Caket, Ahmet Guray & Wang, Chunyang & Nugroho, Marvel Alif & Celik, Hasan & Mobedi, Moghtada, 2022. "Recent studies on 3D lattice metal frame technique for enhancement of heat transfer: Discovering trends and reasons," Renewable and Sustainable Energy Reviews, Elsevier, vol. 167(C).
    14. Hosain, M.L. & Domínguez, J.M. & Bel Fdhila, R. & Kyprianidis, K., 2019. "Smoothed particle hydrodynamics modeling of industrial processes involving heat transfer," Applied Energy, Elsevier, vol. 252(C), pages 1-1.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:267:y:2023:i:c:s0360544222033618. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.