IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v219y2021ics0360544220327766.html
   My bibliography  Save this article

Reaction model of low asphaltene heavy oil from ramped temperature oxidation experimental analyses and numerical simulations

Author

Listed:
  • Yang, Junyu
  • Xu, Qianghui
  • Jiang, Hang
  • Shi, Lin

Abstract

In situ combustion (ISC) is an advanced thermal recovery technique for crude oil exploitation. The crude oil reaction models with accurate kinetic data are crucial to predict the ISC process. This study investigated the China Xinjiang crude oil reaction kinetics through Ramped Temperature Oxidation (RTO) experiments and numerical simulations. Three different ISC behaviors with low-temperature oxidation (LTO), Negative Temperature Gradient Region (NTGR) reactions and high-temperature oxidation (HTO) were observed from the RTO experiments. The effects of the air injection rate and heating rate on the temperature profile and effluent gas composition were carefully investigated. Experimental results showed that the higher air injection rate and lower heating rate enhanced the heat generation, mainly from the more intensive exothermic HTO reactions. A simplified crude oil reaction model involving LTO, NTGR, and HTO was proposed and implemented with a numerical model to simulate the RTO behaviors. This study also suggested a workflow to build the reaction scheme and calibrate the kinetic data for good predictability and generalization. Acceptable consistency was achieved between the RTO experiments and numerical simulation, which demonstrates the proposed reaction model was predictive to capture the key oxidation mechanism and reproduce the ISC behaviors of the Xinjiang crude oil.

Suggested Citation

  • Yang, Junyu & Xu, Qianghui & Jiang, Hang & Shi, Lin, 2021. "Reaction model of low asphaltene heavy oil from ramped temperature oxidation experimental analyses and numerical simulations," Energy, Elsevier, vol. 219(C).
    • Handle: RePEc:eee:energy:v:219:y:2021:i:c:s0360544220327766
    DOI: 10.1016/j.energy.2020.119669
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544220327766
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2020.119669?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Chen, Hao & Liu, Xiliang & Jia, Ninghong & Tian, Xiaofeng & Duncan, Ian & Yang, Ran & Yang, Shenglai, 2020. "The impact of the oil character and quartz sands on the thermal behavior and kinetics of crude oil," Energy, Elsevier, vol. 210(C).
    2. Zhao, Shuai & Pu, Wanfen & Peng, Xiaoqiang & Zhang, Jizhou & Ren, Hao, 2021. "Low-temperature oxidation of heavy crude oil characterized by TG, DSC, GC-MS, and negative ion ESI FT-ICR MS," Energy, Elsevier, vol. 214(C).
    3. Murugan, Pulikesi & Mahinpey, Nader & Mani, Thilakavathi & Asghari, Koorosh, 2010. "Effect of low-temperature oxidation on the pyrolysis and combustion of whole oil," Energy, Elsevier, vol. 35(5), pages 2317-2322.
    4. Khansari, Zeinab & Kapadia, Punitkumar & Mahinpey, Nader & Gates, Ian D., 2014. "A new reaction model for low temperature oxidation of heavy oil: Experiments and numerical modeling," Energy, Elsevier, vol. 64(C), pages 419-428.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Lyudmila Khakimova & Evgeny Popov & Alexey Cheremisin, 2023. "Insights on In Situ Combustion Modeling Based on a Ramped Temperature Oxidation Experiment for Oil Sand Bitumen," Energies, MDPI, vol. 16(18), pages 1-14, September.
    2. Yang, Min & Liu, Yishan & Lu, Ning & Chai, Maojie & Wang, Sen & Feng, Qihong & Chen, Zhangxin, 2023. "Integration of ramped temperature oxidation and combustion tube tests for kinetic modeling of heavy oil in-Situ combustion," Energy, Elsevier, vol. 274(C).
    3. Wei, Cao & Nawaz, Ayesha & Nath, Devjyoti & Zirrahi, Mohsen & Hassanzadeh, Hassan, 2022. "Subsurface waste heat recovery from the abandoned steam assisted gravity drainage (SAGD) operations," Energy, Elsevier, vol. 256(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zhao, Shuai & Pu, Wanfen & Peng, Xiaoqiang & Zhang, Jizhou & Ren, Hao, 2021. "Low-temperature oxidation of heavy crude oil characterized by TG, DSC, GC-MS, and negative ion ESI FT-ICR MS," Energy, Elsevier, vol. 214(C).
    2. Sun, Fengrui & Yao, Yuedong & Chen, Mingqiang & Li, Xiangfang & Zhao, Lin & Meng, Ye & Sun, Zheng & Zhang, Tao & Feng, Dong, 2017. "Performance analysis of superheated steam injection for heavy oil recovery and modeling of wellbore heat efficiency," Energy, Elsevier, vol. 125(C), pages 795-804.
    3. Wang, Dechao & Jin, Lijun & Li, Yang & Yao, Demeng & Wang, Jiaofei & Hu, Haoquan, 2018. "Upgrading of vacuum residue with chemical looping partial oxidation over Ce doped Fe2O3," Energy, Elsevier, vol. 162(C), pages 542-553.
    4. Zhang, Fengming & Xu, Chunyan & Zhang, Yong & Chen, Shouyan & Chen, Guifang & Ma, Chunyuan, 2014. "Experimental study on the operating characteristics of an inner preheating transpiring wall reactor for supercritical water oxidation: Temperature profiles and product properties," Energy, Elsevier, vol. 66(C), pages 577-587.
    5. Yang, Min & Liu, Yishan & Lu, Ning & Chai, Maojie & Wang, Sen & Feng, Qihong & Chen, Zhangxin, 2023. "Integration of ramped temperature oxidation and combustion tube tests for kinetic modeling of heavy oil in-Situ combustion," Energy, Elsevier, vol. 274(C).
    6. Lina Zhang & Dianfa Du & Yaozu Zhang & Xin Liu & Jingang Fu & Yuan Li & Jianhua Ren, 2022. "Steam Cavity Expansion Model for Steam Flooding in Deep Heavy Oil Reservoirs," Energies, MDPI, vol. 15(13), pages 1-15, June.
    7. Gu, Hao & Cheng, Linsong & Huang, Shijun & Du, Baojian & Hu, Changhao, 2014. "Prediction of thermophysical properties of saturated steam and wellbore heat losses in concentric dual-tubing steam injection wells," Energy, Elsevier, vol. 75(C), pages 419-429.
    8. Sun, Fengrui & Li, Chunlan & Cheng, Linsong & Huang, Shijun & Zou, Ming & Sun, Qun & Wu, Xiaojun, 2017. "Production performance analysis of heavy oil recovery by cyclic superheated steam stimulation," Energy, Elsevier, vol. 121(C), pages 356-371.
    9. Chen, Hao & Liu, Xiliang & Jia, Ninghong & Tian, Xiaofeng & Duncan, Ian & Yang, Ran & Yang, Shenglai, 2020. "The impact of the oil character and quartz sands on the thermal behavior and kinetics of crude oil," Energy, Elsevier, vol. 210(C).
    10. Ling, Zhongqian & Zhou, Hao & Ren, Tao, 2015. "Effect of the flue gas recirculation supply location on the heavy oil combustion and NOx emission characteristics within a pilot furnace fired by a swirl burner," Energy, Elsevier, vol. 91(C), pages 110-116.
    11. Versan KOK, Mustafa, 2011. "Thermo-oxidative characterization and kinetics of tar sands," Energy, Elsevier, vol. 36(8), pages 5338-5342.
    12. Liangliang Wang & Jiexiang Wang & Wanfen Pu & Tengfei Wang, 2021. "Combustion Behavior and Kinetics Analysis of Isothermal Oxidized Oils from Fengcheng Extra-Heavy Oil," Energies, MDPI, vol. 14(19), pages 1-17, October.
    13. Xu, Shaotao & Lü, Xiaoshu & Sun, Youhong & Guo, Wei & Li, Qiang & Liu, Lang & Kang, Shijie & Deng, Sunhua, 2023. "Optimization of temperature parameters for the autothermic pyrolysis in-situ conversion process of oil shale," Energy, Elsevier, vol. 264(C).
    14. Khansari, Zeinab & Kapadia, Punitkumar & Mahinpey, Nader & Gates, Ian D., 2014. "A new reaction model for low temperature oxidation of heavy oil: Experiments and numerical modeling," Energy, Elsevier, vol. 64(C), pages 419-428.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:219:y:2021:i:c:s0360544220327766. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.