IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v179y2019icp603-617.html
   My bibliography  Save this article

Influence of injection mode on the combustion characteristics of slight temperature rise combustion in gas turbine combustor with cavity

Author

Listed:
  • Zhang, R.C.
  • Huang, X.Y.
  • Fan, W.J.
  • Bai, N.J.

Abstract

Interstage turbine combustors can be used to improve the thrust-to-weight ratio of gas turbines, but their operating conditions and technical requirements are obviously different from those of traditional gas turbine combustors. A typical feature of these combustors is the slight temperature rise combustion under the high velocity conditions of combustor inlets. In this study, a new type of interstage turbine combustor with high performance was proposed, and the influence of the injection mode on the combustion characteristics was investigated. Seven combustion modes with a trapped-vortex combustion zone and preheated fuel nozzles were designed. The effects of the average temperature of the combustion zone (changed by the air injection mode) and the combustion-zone temperature distribution (changed by the combustion-zone configuration) on the combustion characteristics, including the stable combustion boundary, the combustion efficiency, and the temperature distribution, were studied experimentally and numerically. The results showed that high-efficiency combustion in a wide, stable working range was achieved. The new combustor had a shorter length than the conventional combustor and had a wider lean blowout boundary compared to the same type of combustor. Based on the results, the optimal combustor configuration that could be used for practical applications in high-efficiency gas turbines was determined.

Suggested Citation

  • Zhang, R.C. & Huang, X.Y. & Fan, W.J. & Bai, N.J., 2019. "Influence of injection mode on the combustion characteristics of slight temperature rise combustion in gas turbine combustor with cavity," Energy, Elsevier, vol. 179(C), pages 603-617.
    • Handle: RePEc:eee:energy:v:179:y:2019:i:c:p:603-617
    DOI: 10.1016/j.energy.2019.04.223
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544219308631
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2019.04.223?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Tyliszczak, Artur & Boguslawski, Andrzej & Nowak, Dariusz, 2016. "Numerical simulations of combustion process in a gas turbine with a single and multi-point fuel injection system," Applied Energy, Elsevier, vol. 174(C), pages 153-165.
    2. Zhang, R.C. & Bai, N.J. & Fan, W.J. & Yan, W.H. & Hao, F. & Yin, C.M., 2018. "Flow field and combustion characteristics of integrated combustion mode using cavity with low flow resistance for gas turbine engines," Energy, Elsevier, vol. 165(PA), pages 979-996.
    3. Zhang, Rongchun & Xu, Quanyong & Fan, Weijun, 2018. "Effect of swirl field on the fuel concentration distribution and combustion characteristics in gas turbine combustor with cavity," Energy, Elsevier, vol. 162(C), pages 83-98.
    4. Zhang, R.C. & Fan, W.J. & Xing, F. & Song, S.W. & Shi, Q. & Tian, G.H. & Tan, W.L., 2015. "Experimental study of slight temperature rise combustion in trapped vortex combustors for gas turbines," Energy, Elsevier, vol. 93(P2), pages 1535-1547.
    5. Zhang, R.C. & Hao, F. & Fan, W.J., 2018. "Combustion and stability characteristics of ultra-compact combustor using cavity for gas turbines," Applied Energy, Elsevier, vol. 225(C), pages 940-954.
    6. Jin, Yi & Li, Yefang & He, Xiaomin & Zhang, Jingyu & Jiang, Bo & Wu, Zejun & Song, Yaoyu, 2014. "Experimental investigations on flow field and combustion characteristics of a model trapped vortex combustor," Applied Energy, Elsevier, vol. 134(C), pages 257-269.
    7. Zhang, R.C. & Fan, W.J. & Shi, Q. & Tan, W.L., 2014. "Combustion and emissions characteristics of dual-channel double-vortex combustion for gas turbine engines," Applied Energy, Elsevier, vol. 130(C), pages 314-325.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Fu, Zaiguo & Gao, Huanhuan & Zeng, Zhuoxiong & Liu, Jiang & Zhu, Qunzhi, 2020. "Generation characteristics of thermal NOx in a double-swirler annular combustor under various inlet conditions," Energy, Elsevier, vol. 200(C).
    2. Wan, Jianlong & Zhao, Haibo, 2021. "Ultra-lean blow-off dynamics of a holder-stabilized premixed flame in a preheated mesoscale combustor near laminar critical condition," Energy, Elsevier, vol. 228(C).
    3. Li, Mingyu & Wang, Qian & He, Xiaomin & Xiao, Jiankun & Ma, Heng, 2022. "Effects of fuel injection on the combustion and emission performance of a trapped vortex combustor," Energy, Elsevier, vol. 252(C).
    4. Zhang, R.C. & Bai, N.J. & Fan, W.J. & Huang, X.Y. & Fan, X.Q., 2019. "Influence of flame stabilization and fuel injection modes on the flow and combustion characteristics of gas turbine combustor with cavity," Energy, Elsevier, vol. 189(C).
    5. Huang, Yakun & He, Xiaomin & Zhang, Huangwei & Zhu, Zhixin & Zhu, Huanyu, 2022. "Flame stability optimization of cavity primary air-jet form in an augmentor," Energy, Elsevier, vol. 239(PA).
    6. Zhao, Yuling & He, Xiaomin & Li, Mingyu, 2020. "Effect of mainstream forced entrainment on the combustion performance of a gas turbine combustor," Applied Energy, Elsevier, vol. 279(C).
    7. Fuquan Deng & Minwei Zhao & Shunchuang Qin & Zhaokun Wang & Yongliang Xie & Hongtao Zheng & Xiao Liu & Feng Zhang, 2023. "Numerical Simulation Study on the Dynamics of Bluff-Body Flames under Oxygen-Lean Conditions," Energies, MDPI, vol. 17(1), pages 1-19, December.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zhang, R.C. & Bai, N.J. & Fan, W.J. & Huang, X.Y. & Fan, X.Q., 2019. "Influence of flame stabilization and fuel injection modes on the flow and combustion characteristics of gas turbine combustor with cavity," Energy, Elsevier, vol. 189(C).
    2. Zhang, R.C. & Bai, N.J. & Fan, W.J. & Yan, W.H. & Hao, F. & Yin, C.M., 2018. "Flow field and combustion characteristics of integrated combustion mode using cavity with low flow resistance for gas turbine engines," Energy, Elsevier, vol. 165(PA), pages 979-996.
    3. Zhang, R.C. & Hao, F. & Fan, W.J., 2018. "Combustion and stability characteristics of ultra-compact combustor using cavity for gas turbines," Applied Energy, Elsevier, vol. 225(C), pages 940-954.
    4. Miao, Junjie & Fan, Yuxin & Wu, Weiqiu & Zhao, Shilong, 2021. "Effect of air-assistant on ignition and flame-holding characteristics in a cavity-strut based combustor," Applied Energy, Elsevier, vol. 283(C).
    5. Shilong, Zhao & Yuxin, Fan & Deng, Tiantai & Crookes, Danny, 2020. "Influence of injection scheme on flame characteristics in partially premixed combustion," Energy, Elsevier, vol. 205(C).
    6. Zhao, Yuling & He, Xiaomin & Li, Mingyu, 2020. "Effect of mainstream forced entrainment on the combustion performance of a gas turbine combustor," Applied Energy, Elsevier, vol. 279(C).
    7. Li, Mingyu & Wang, Qian & He, Xiaomin & Xiao, Jiankun & Ma, Heng, 2022. "Effects of fuel injection on the combustion and emission performance of a trapped vortex combustor," Energy, Elsevier, vol. 252(C).
    8. Zhang, Rongchun & Xu, Quanyong & Fan, Weijun, 2018. "Effect of swirl field on the fuel concentration distribution and combustion characteristics in gas turbine combustor with cavity," Energy, Elsevier, vol. 162(C), pages 83-98.
    9. Li, Mingyu & He, Xiaomin & Zhao, Yuling & Jin, Yi & Yao, Kanghong & Ge, Zhenghao, 2018. "Performance enhancement of a trapped-vortex combustor for gas turbine engines using a novel hybrid-atomizer," Applied Energy, Elsevier, vol. 216(C), pages 286-295.
    10. Yang, Xiao & He, Zhihong & Qiu, Penghua & Dong, Shikui & Tan, Heping, 2019. "Numerical investigations on combustion and emission characteristics of a novel elliptical jet-stabilized model combustor," Energy, Elsevier, vol. 170(C), pages 1082-1097.
    11. Tyliszczak, Artur & Boguslawski, Andrzej & Nowak, Dariusz, 2016. "Numerical simulations of combustion process in a gas turbine with a single and multi-point fuel injection system," Applied Energy, Elsevier, vol. 174(C), pages 153-165.
    12. Zhang, R.C. & Fan, W.J. & Xing, F. & Song, S.W. & Shi, Q. & Tian, G.H. & Tan, W.L., 2015. "Experimental study of slight temperature rise combustion in trapped vortex combustors for gas turbines," Energy, Elsevier, vol. 93(P2), pages 1535-1547.
    13. Huang, Yakun & He, Xiaomin & Zhang, Huangwei & Zhu, Zhixin & Zhu, Huanyu, 2022. "Flame stability optimization of cavity primary air-jet form in an augmentor," Energy, Elsevier, vol. 239(PA).
    14. Zong, Chao & Ji, Chenzhen & Cheng, Jiaying & Zhu, Tong & Guo, Desan & Li, Chengqin & Duan, Fei, 2022. "Toward off-design loads: Investigations on combustion and emissions characteristics of a micro gas turbine combustor by external combustion-air adjustments," Energy, Elsevier, vol. 253(C).
    15. Asgari, Behrad & Amani, Ehsan, 2017. "A multi-objective CFD optimization of liquid fuel spray injection in dry-low-emission gas-turbine combustors," Applied Energy, Elsevier, vol. 203(C), pages 696-710.
    16. Joo, Seongpil & Choi, Jongwun & Lee, Min Chul & Kim, Namkeun, 2021. "Prognosis of combustion instability in a gas turbine combustor using spectral centroid & spread," Energy, Elsevier, vol. 224(C).
    17. Enagi, Ibrahim I. & Al-attab, K.A. & Zainal, Z.A., 2018. "Liquid biofuels utilization for gas turbines: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 90(C), pages 43-55.
    18. Chen, Longfei & Zhang, Zhichao & Lu, Yiji & Zhang, Chi & Zhang, Xin & Zhang, Cuiqi & Roskilly, Anthony Paul, 2017. "Experimental study of the gaseous and particulate matter emissions from a gas turbine combustor burning butyl butyrate and ethanol blends," Applied Energy, Elsevier, vol. 195(C), pages 693-701.
    19. Gurunadh Velidi & Chun Sang Yoo, 2023. "A Review on Flame Stabilization Technologies for UAV Engine Micro-Meso Scale Combustors: Progress and Challenges," Energies, MDPI, vol. 16(9), pages 1-44, May.
    20. Xiangzhong Jia & Yong Shan & Xingping Xu & Jingzhou Zhang & Xiaoming Tan, 2021. "Effects of Bypass Flow Distribution on Cold Flow Characteristics of Integrated Afterburner," Energies, MDPI, vol. 14(18), pages 1-17, September.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:179:y:2019:i:c:p:603-617. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.