IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v179y2019icp373-382.html
   My bibliography  Save this article

Energy harvesting performance of unimorph piezoelectric cantilever generator using interdigitated electrode lead zirconate titanate laminate

Author

Listed:
  • Lee, Min-seon
  • Kim, Chang-il
  • Park, Woon-ik
  • Cho, Jeong-ho
  • Paik, Jong-hoo
  • Jeong, Young Hun

Abstract

An unimorph piezoelectric cantilever generator with an interdigitated electrode (IDE) was developed for application to vibration energy harvesters driven in longitudinal mode. Lead zirconate titanate (PZT) thick film was fabricated by lamination of 10 sheets printed with Ag IDE; the laminated film was subsequently cofired at 850 °C for 2 h. Compared with a conventional IDE PZT thick film, the approximately 270 ㎛-thick cofired IDE PZT laminate revealed a significantly increased capacitance due to reduction of transition area. The use of multilayered IDE could result in the enhancement of energy harvesting performance for unimorph piezoelectric cantilever generator using PZT laminate. Optimized bending resonance frequency was obtained at 78 Hz for the unimorph piezoelectric cantilever generator with tip mass of 2.3 g driven in longitudinal vibration mode. Its energy harvesting performance was characterized as having a high power density of 26.7 mW/cm3 across the resistive load of 80 kΩ, corresponding to a normalized power factor of 6.7 mW/G2·cm3.

Suggested Citation

  • Lee, Min-seon & Kim, Chang-il & Park, Woon-ik & Cho, Jeong-ho & Paik, Jong-hoo & Jeong, Young Hun, 2019. "Energy harvesting performance of unimorph piezoelectric cantilever generator using interdigitated electrode lead zirconate titanate laminate," Energy, Elsevier, vol. 179(C), pages 373-382.
    • Handle: RePEc:eee:energy:v:179:y:2019:i:c:p:373-382
    DOI: 10.1016/j.energy.2019.04.215
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544219308552
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2019.04.215?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Song, Hyun-Cheol & Kumar, Prashant & Sriramdas, Rammohan & Lee, Hyeon & Sharpes, Nathan & Kang, Min-Gyu & Maurya, Deepam & Sanghadasa, Mohan & Kang, Hyung-Won & Ryu, Jungho & Reynolds, William T. & Pr, 2018. "Broadband dual phase energy harvester: Vibration and magnetic field," Applied Energy, Elsevier, vol. 225(C), pages 1132-1142.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Yonghyeon Na & Min-Seon Lee & Jung Woo Lee & Young Hun Jeong, 2021. "Horizontally Assembled Trapezoidal Piezoelectric Cantilevers Driven by Magnetic Coupling for Rotational Energy Harvester Applications," Energies, MDPI, vol. 14(2), pages 1-16, January.
    2. Manuel Serrano & Kevin Larkin & Sergei Tretiak & Abdessattar Abdelkefi, 2023. "Piezoelectric Energy Harvesting Gyroscopes: Comparative Modeling and Effectiveness," Energies, MDPI, vol. 16(4), pages 1-21, February.
    3. Hong, Seong Do & Ahn, Jung Hwan & Kim, Kyung-Bum & Kim, Jeong Hun & Cho, Jae Yong & Woo, Min Sik & Song, Yewon & Hwang, Wonseop & Jeon, Deok Hwan & Kim, Jihoon & Jeong, Se Yeong & Woo, Sang Bum & Ryu,, 2022. "Uniform stress distribution road piezoelectric generator with free-fixed-end type central strike mechanism," Energy, Elsevier, vol. 239(PA).
    4. Na, Yonghyeon & Lee, Min-Seon & Lee, Jung Woo & Jeong, Young Hun, 2020. "Wind energy harvesting from a magnetically coupled piezoelectric bimorph cantilever array based on a dynamic magneto-piezo-elastic structure," Applied Energy, Elsevier, vol. 264(C).
    5. Li, Zhongjie & Peng, Yan & Xu, Zhibing & Peng, Jinlin & Xin, Liming & Wang, Min & Luo, Jun & Xie, Shaorong & Pu, Huayan, 2021. "Harnessing energy from suspension systems of oceanic vehicles with high-performance piezoelectric generators," Energy, Elsevier, vol. 228(C).
    6. Maroofiazar, Rasool & Fahimi Farzam, Maziar, 2021. "Experimental investigation of energy harvesting from sloshing phenomenon: Comparison of Newtonian and non-Newtonian fluids," Energy, Elsevier, vol. 225(C).
    7. Arias, Francisco J. & De Las Heras, Salvador, 2019. "The use of compliant surfaces for harvesting energy from water streams," Energy, Elsevier, vol. 189(C).
    8. Shan, Xiaobiao & Sui, Guangdong & Tian, Haigang & Min, Zhaowei & Feng, Ju & Xie, Tao, 2022. "Numerical analysis and experiments of an underwater magnetic nonlinear energy harvester based on vortex-induced vibration," Energy, Elsevier, vol. 241(C).
    9. Fang, Shitong & Miao, Gang & Chen, Keyu & Xing, Juntong & Zhou, Shengxi & Yang, Zhichun & Liao, Wei-Hsin, 2022. "Broadband energy harvester for low-frequency rotations utilizing centrifugal softening piezoelectric beam array," Energy, Elsevier, vol. 241(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Chen, Lin & Liao, Xin & Sun, Beibei & Zhang, Ning & Wu, Jianwei, 2022. "A numerical-experimental dynamic analysis of high-efficiency and broadband bistable energy harvester with self-decreasing potential barrier effect," Applied Energy, Elsevier, vol. 317(C).
    2. Zhuang Lu & Quan Wen & Xianming He & Zhiyu Wen, 2019. "A Nonlinear Broadband Electromagnetic Vibration Energy Harvester Based on Double-Clamped Beam," Energies, MDPI, vol. 12(14), pages 1-12, July.
    3. Sun, Rujie & Li, Qinyu & Yao, Jianfei & Scarpa, Fabrizio & Rossiter, Jonathan, 2020. "Tunable, multi-modal, and multi-directional vibration energy harvester based on three-dimensional architected metastructures," Applied Energy, Elsevier, vol. 264(C).
    4. Shim, Hyo-Kyung & Sun, Shuailing & Kim, Hyun-Soo & Lee, Dong-Gyu & Lee, Yeon-Jeong & Jang, Ji-Soo & Cho, Kyung-Hoon & Baik, Jeong Min & Kang, Chong-Yun & Leng, Yonggang & Hur, Sunghoon & Song, Hyun-Ch, 2022. "On a nonlinear broadband piezoelectric energy harvester with a coupled beam array," Applied Energy, Elsevier, vol. 328(C).
    5. Liu, Weiqun & Yuan, Zhongxin & Zhang, Shuang & Zhu, Qiao, 2019. "Enhanced broadband generator of dual buckled beams with simultaneous translational and torsional coupling," Applied Energy, Elsevier, vol. 251(C), pages 1-1.
    6. Gao, Xiangyu & Qiu, Chaorui & Li, Guo & Ma, Ming & Yang, Shuai & Xu, Zhuo & Li, Fei, 2020. "High output power density of a shear-mode piezoelectric energy harvester based on Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 single crystals," Applied Energy, Elsevier, vol. 271(C).
    7. Wang, Chen & Lai, Siu-Kai & Wang, Jia-Mei & Feng, Jing-Jing & Ni, Yi-Qing, 2021. "An ultra-low-frequency, broadband and multi-stable tri-hybrid energy harvester for enabling the next-generation sustainable power," Applied Energy, Elsevier, vol. 291(C).
    8. Sallam A. Kouritem & Muath A. Bani-Hani & Mohamed Beshir & Mohamed M. Y. B. Elshabasy & Wael A. Altabey, 2022. "Automatic Resonance Tuning Technique for an Ultra-Broadband Piezoelectric Energy Harvester," Energies, MDPI, vol. 15(19), pages 1-20, October.
    9. Paul, Kankana & Amann, Andreas & Roy, Saibal, 2021. "Tapered nonlinear vibration energy harvester for powering Internet of Things," Applied Energy, Elsevier, vol. 283(C).
    10. Maurya, Deepam & Kumar, Prashant & Khaleghian, Seyedmeysam & Sriramdas, Rammohan & Kang, Min Gyu & Kishore, Ravi Anant & Kumar, Vireshwar & Song, Hyun-Cheol & Park, Jung-Min (Jerry) & Taheri, Saied & , 2018. "Energy harvesting and strain sensing in smart tire for next generation autonomous vehicles," Applied Energy, Elsevier, vol. 232(C), pages 312-322.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:179:y:2019:i:c:p:373-382. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.