IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v155y2018icp763-771.html
   My bibliography  Save this article

Development of novel polyethylene air-cathode material for microbial fuel cells

Author

Listed:
  • Gao, Ningshengjie
  • Qu, Botong
  • Xing, Zhenyu
  • Ji, Xiulei
  • Zhang, Eugene
  • Liu, Hong

Abstract

Air-cathode fabrication is currently a key factor that hinders the scaling up of microbial fuel cell (MFC) technology. A new type of cathode material that contains porous polyethylene (PE) sheet and a blended activated carbon (AC) and highly conductive carbon back (CB) layer was developed for the first time. The PE sheet functions as both gas diffusion layer (GDL) and cathode supporting material. The blended AC and CB layer eliminates expensive current collector. Among different types of PE sheets and AC and CB blending ratios, the cathode with Type I PE sheet (75–110 μm pore size) and a CB/AC ratio of 1: 0.5 demonstrated the best performance (8.4 A m−2 at 0 V) in electrochemical cells. MFCs with this cathode generated more stable and higher power densities compared with those using PTFE cathodes. Simulation of ohmic potential drops across this cathode material suggests that using a two-parallel terminal connection design would result in only 0.04 V potential drop at 1 m2 scale. This study suggests that this new PE cathode material has great potential for use in scaled up MFC systems due to its decent performance, simple fabrication process, and use of low-cost material.

Suggested Citation

  • Gao, Ningshengjie & Qu, Botong & Xing, Zhenyu & Ji, Xiulei & Zhang, Eugene & Liu, Hong, 2018. "Development of novel polyethylene air-cathode material for microbial fuel cells," Energy, Elsevier, vol. 155(C), pages 763-771.
    • Handle: RePEc:eee:energy:v:155:y:2018:i:c:p:763-771
    DOI: 10.1016/j.energy.2018.05.055
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544218308752
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2018.05.055?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Zinadini, S. & Zinatizadeh, A.A. & Rahimi, M. & Vatanpour, V. & Bahrami, K., 2017. "Energy recovery and hygienic water production from wastewater using an innovative integrated microbial fuel cell–membrane separation process," Energy, Elsevier, vol. 141(C), pages 1350-1362.
    2. Salar-García, M.J. & Ortiz-Martínez, V.M. & Baicha, Z. & de los Ríos, A.P. & Hernández-Fernández, F.J., 2016. "Scaled-up continuous up-flow microbial fuel cell based on novel embedded ionic liquid-type membrane-cathode assembly," Energy, Elsevier, vol. 101(C), pages 113-120.
    3. Zinadini, S. & Zinatizadeh, A.A. & Rahimi, M. & Vatanpour, V. & Rahimi, Z., 2017. "High power generation and COD removal in a microbial fuel cell operated by a novel sulfonated PES/PES blend proton exchange membrane," Energy, Elsevier, vol. 125(C), pages 427-438.
    4. Lay, Chyi-How & Kokko, Marika E. & Puhakka, Jaakko A., 2015. "Power generation in fed-batch and continuous up-flow microbial fuel cell from synthetic wastewater," Energy, Elsevier, vol. 91(C), pages 235-241.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Shahid, Kanwal & Ramasamy, Deepika Lakshmi & Haapasaari, Sampo & Sillanpää, Mika & Pihlajamäki, Arto, 2021. "Stainless steel and carbon brushes as high-performance anodes for energy production and nutrient recovery using the microbial nutrient recovery system," Energy, Elsevier, vol. 233(C).
    2. Wang, Yuyang & Chen, Ye & Wen, Qing & Zheng, Hongtao & Xu, Haitao & Qi, Lijuan, 2019. "Electricity generation, energy storage, and microbial-community analysis in microbial fuel cells with multilayer capacitive anodes," Energy, Elsevier, vol. 189(C).
    3. Chen, Bor-Yann & Liao, Jia-Hui & Hsueh, Chung-Chuan & Qu, Ziwei & Hsu, An-Wei & Chang, Chang-Tang & Zhang, Shuping, 2018. "Deciphering biostimulation strategy of using medicinal herbs and tea extracts for bioelectricity generation in microbial fuel cells," Energy, Elsevier, vol. 161(C), pages 1042-1054.
    4. Cheraghipoor, Marzieh & Mohebbi-Kalhori, Davod & Noroozifar, Meissam & Maghsoodlou, Malek Taher, 2019. "Comparative study of bioelectricity generation in a microbial fuel cell using ceramic membranes made of ceramic powder, Kalporgan's soil, and acid leached Kalporgan's soil," Energy, Elsevier, vol. 178(C), pages 368-377.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Shahid, Kanwal & Ramasamy, Deepika Lakshmi & Haapasaari, Sampo & Sillanpää, Mika & Pihlajamäki, Arto, 2021. "Stainless steel and carbon brushes as high-performance anodes for energy production and nutrient recovery using the microbial nutrient recovery system," Energy, Elsevier, vol. 233(C).
    2. Ortiz-Martínez, V.M. & Salar-García, M.J. & Touati, K. & Hernández-Fernández, F.J. & de los Ríos, A.P. & Belhoucine, F. & Berrabbah, A. Alioua, 2016. "Assessment of spinel-type mixed valence Cu/Co and Ni/Co-based oxides for power production in single-chamber microbial fuel cells," Energy, Elsevier, vol. 113(C), pages 1241-1249.
    3. Wang, Yuyang & Chen, Ye & Wen, Qing & Zheng, Hongtao & Xu, Haitao & Qi, Lijuan, 2019. "Electricity generation, energy storage, and microbial-community analysis in microbial fuel cells with multilayer capacitive anodes," Energy, Elsevier, vol. 189(C).
    4. Chen, Bor-Yann & Liao, Jia-Hui & Hsueh, Chung-Chuan & Qu, Ziwei & Hsu, An-Wei & Chang, Chang-Tang & Zhang, Shuping, 2018. "Deciphering biostimulation strategy of using medicinal herbs and tea extracts for bioelectricity generation in microbial fuel cells," Energy, Elsevier, vol. 161(C), pages 1042-1054.
    5. Tang, Raymond Chong Ong & Jang, Jer-Huan & Lan, Tzu-Hsuan & Wu, Jung-Chen & Yan, Wei-Mon & Sangeetha, Thangavel & Wang, Chin-Tsan & Ong, Hwai Chyuan & Ong, Zhi Chao, 2020. "Review on design factors of microbial fuel cells using Buckingham's Pi Theorem," Renewable and Sustainable Energy Reviews, Elsevier, vol. 130(C).
    6. Hassan, Sedky H.A. & el Nasser A. Zohri, Abd & Kassim, Rehab M.F., 2019. "Electricity generation from sugarcane molasses using microbial fuel cell technologies," Energy, Elsevier, vol. 178(C), pages 538-543.
    7. Choudhury, Payel & Uday, Uma Shankar Prasad & Mahata, Nibedita & Nath Tiwari, Onkar & Narayan Ray, Rup & Kanti Bandyopadhyay, Tarun & Bhunia, Biswanath, 2017. "Performance improvement of microbial fuel cells for waste water treatment along with value addition: A review on past achievements and recent perspectives," Renewable and Sustainable Energy Reviews, Elsevier, vol. 79(C), pages 372-389.
    8. Xin, Shuaishuai & Shen, Jianguo & Liu, Guocheng & Chen, Qinghua & Xiao, Zhou & Zhang, Guodong & Xin, Yanjun, 2020. "High electricity generation and COD removal from cattle wastewater in microbial fuel cells with 3D air cathode employed non-precious Cu2O/reduced graphene oxide as cathode catalyst," Energy, Elsevier, vol. 196(C).
    9. Eisa, Tasnim & Park, Sung-Gwan & Mohamed, Hend Omar & Abdelkareem, Mohammad Ali & Lee, Jieun & Yang, Euntae & Castaño, Pedro & Chae, Kyu-Jung, 2021. "Outstanding performance of direct urea/hydrogen peroxide fuel cell based on precious metal-free catalyst electrodes," Energy, Elsevier, vol. 228(C).
    10. Yue, Xirong & Ji, Xu & Xu, Haiyang & Yang, Bianfeng & Wang, Mengqi & Yang, Yuan, 2023. "Performance investigation on GO-TiO2/PVDF composite ultrafiltration membrane for slightly polluted ground water treatment," Energy, Elsevier, vol. 273(C).
    11. Jaecheul Yu & Hana Park & Younghyun Park & Taeho Lee, 2022. "Power Generation and Microbial Community Shift According to Applied Anodic Potential in Electroactive Biofilm Reactors Treating Synthetic and Domestic Wastewater," Energies, MDPI, vol. 15(24), pages 1-12, December.
    12. Salar-García, M.J. & Ortiz-Martínez, V.M. & Baicha, Z. & de los Ríos, A.P. & Hernández-Fernández, F.J., 2016. "Scaled-up continuous up-flow microbial fuel cell based on novel embedded ionic liquid-type membrane-cathode assembly," Energy, Elsevier, vol. 101(C), pages 113-120.
    13. Kondaveeti, Sanath & Patel, Sanjay K.S. & Pagolu, Raviteja & Li, Jinglin & Kalia, Vipin C. & Choi, Myung-Seok & Lee, Jung-Kul, 2019. "Conversion of simulated biogas to electricity: Sequential operation of methanotrophic reactor effluents in microbial fuel cell," Energy, Elsevier, vol. 189(C).
    14. Ortiz-Martínez, V.M. & Salar-García, M.J. & Hernández-Fernández, F.J. & de los Ríos, A.P., 2015. "Development and characterization of a new embedded ionic liquid based membrane-cathode assembly for its application in single chamber microbial fuel cells," Energy, Elsevier, vol. 93(P2), pages 1748-1757.
    15. Shabani, Mehri & Younesi, Habibollah & Pontié, Maxime & Rahimpour, Ahmad & Rahimnejad, Mostafa & Guo, Hanxiao & Szymczyk, Anthony, 2021. "Enhancement of microbial fuel cell efficiency by incorporation of graphene oxide and functionalized graphene oxide in sulfonated polyethersulfone membrane," Renewable Energy, Elsevier, vol. 179(C), pages 788-801.
    16. Wang, Yuyang & Zhu, Lin & An, Lijuan, 2020. "Electricity generation and storage in microbial fuel cells with porous polypyrrole-base composite modified carbon brush anodes," Renewable Energy, Elsevier, vol. 162(C), pages 2220-2226.
    17. Szymon Potrykus & Sara Mateo & Janusz Nieznański & Francisco Jesús Fernández-Morales, 2020. "The Influent Effects of Flow Rate Profile on the Performance of Microbial Fuel Cells Model," Energies, MDPI, vol. 13(18), pages 1-15, September.
    18. Saba, Beenish & Christy, Ann D. & Yu, Zhongtang & Co, Anne C., 2017. "Sustainable power generation from bacterio-algal microbial fuel cells (MFCs): An overview," Renewable and Sustainable Energy Reviews, Elsevier, vol. 73(C), pages 75-84.
    19. Mohamed, Hend Omar & Talas, Sawsan Abo & Sayed, Enas T. & Park, Sung-Gwan & Eisa, Tasnim & Abdelkareem, Mohammad Ali & Fadali, Olfat A. & Chae, Kyu-Jung & Castaño, Pedro, 2021. "Enhancing power generation in microbial fuel cell using tungsten carbide on reduced graphene oxide as an efficient anode catalyst material," Energy, Elsevier, vol. 229(C).
    20. Zinadini, S. & Zinatizadeh, A.A. & Rahimi, M. & Vatanpour, V. & Bahrami, K., 2017. "Energy recovery and hygienic water production from wastewater using an innovative integrated microbial fuel cell–membrane separation process," Energy, Elsevier, vol. 141(C), pages 1350-1362.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:155:y:2018:i:c:p:763-771. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.