IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v251y2019ic105.html
   My bibliography  Save this article

Experimental and numerical measurements of the channel packed with disordered cement granules regarding the heat transfer performance

Author

Listed:
  • Shao, Wei
  • Cui, Zheng
  • Chen, Zhao-you
  • Wang, Jing-chen
  • Liu, Yu
  • Ren, Xiao-han
  • Luo, Feng

Abstract

The channels packed with disordered granules are common in industry, which permits an improved performance of the facility as well as the energy efficiency. This paper describes the construction of an experimental platform of a packed channel with disordered cement granules. Using the method of dimensionless number correlation, fitting the data of Nusselt and Reynolds numbers provides an experimental correlation. Analysis shows that the Nusselt number in a packed channel is approximately eight times that in a smooth channel. The inner-wall temperature of a channel with smaller granules is lower, implying the heat transfer is stronger. The inverse problem method is adopted to measure the local average velocity and obtain the temperature distribution, permitting then a determination of the Reynold number based on the local average velocity in the channel combined with the fitted experimental correlation and a mathematical model of the experimental section. Comparisons with the Reynold number obtained from the superficial flow velocity shows that the Reynold number obtained from the average local velocity is much smaller and in particular, for the same mass flow rates, the latter Reynold number of the channel packed with smaller granules is larger than that packed with larger granules. It provides useful tools to analysis the local heat transfer performance to improve the energy efficiency in actual applications.

Suggested Citation

  • Shao, Wei & Cui, Zheng & Chen, Zhao-you & Wang, Jing-chen & Liu, Yu & Ren, Xiao-han & Luo, Feng, 2019. "Experimental and numerical measurements of the channel packed with disordered cement granules regarding the heat transfer performance," Applied Energy, Elsevier, vol. 251(C), pages 1-1.
  • Handle: RePEc:eee:appene:v:251:y:2019:i:c:105
    DOI: 10.1016/j.apenergy.2019.05.047
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261919309006
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.apenergy.2019.05.047?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Anderson, Ryan & Shiri, Samira & Bindra, Hitesh & Morris, Jeffrey F., 2014. "Experimental results and modeling of energy storage and recovery in a packed bed of alumina particles," Applied Energy, Elsevier, vol. 119(C), pages 521-529.
    2. Wu, Ming & Li, Mingjia & Xu, Chao & He, Yaling & Tao, Wenquan, 2014. "The impact of concrete structure on the thermal performance of the dual-media thermocline thermal storage tank using concrete as the solid medium," Applied Energy, Elsevier, vol. 113(C), pages 1363-1371.
    3. Demirel, Yasar & Al-Ali, Habib H. & Abu-Al-Saud, Basem A., 1999. "Enhancement of convection heat-transfer in a rectangular duct," Applied Energy, Elsevier, vol. 64(1-4), pages 441-451, September.
    4. Zanganeh, G. & Pedretti, A. & Haselbacher, A. & Steinfeld, A., 2015. "Design of packed bed thermal energy storage systems for high-temperature industrial process heat," Applied Energy, Elsevier, vol. 137(C), pages 812-822.
    5. Peng, Hao & Li, Rui & Ling, Xiang & Dong, Huihua, 2015. "Modeling on heat storage performance of compressed air in a packed bed system," Applied Energy, Elsevier, vol. 160(C), pages 1-9.
    6. Wang, Jingyu & Yang, Jian & Cheng, Zhilong & Liu, Yan & Chen, Yitung & Wang, Qiuwang, 2018. "Experimental and numerical study on pressure drop and heat transfer performance of grille-sphere composite structured packed bed," Applied Energy, Elsevier, vol. 227(C), pages 719-730.
    7. Dhiman, Prashant & Thakur, N.S. & Kumar, Anoop & Singh, Satyender, 2011. "An analytical model to predict the thermal performance of a novel parallel flow packed bed solar air heater," Applied Energy, Elsevier, vol. 88(6), pages 2157-2167, June.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Wang, Jingyu & Yang, Jian & Cheng, Zhilong & Liu, Yan & Chen, Yitung & Wang, Qiuwang, 2018. "Experimental and numerical study on pressure drop and heat transfer performance of grille-sphere composite structured packed bed," Applied Energy, Elsevier, vol. 227(C), pages 719-730.
    2. Mario Cascetta & Fabio Serra & Simone Arena & Efisio Casti & Giorgio Cau & Pierpaolo Puddu, 2016. "Experimental and Numerical Research Activity on a Packed Bed TES System," Energies, MDPI, vol. 9(9), pages 1-13, September.
    3. Li, Long & Yan, Xiaohong & Yang, Jian & Wang, Qiuwang, 2017. "Numerical investigation on band-broadening characteristics of an ordered packed bed with novel particles," Applied Energy, Elsevier, vol. 185(P2), pages 2168-2180.
    4. Fasquelle, T. & Falcoz, Q. & Neveu, P. & Hoffmann, J.-F., 2018. "A temperature threshold evaluation for thermocline energy storage in concentrated solar power plants," Applied Energy, Elsevier, vol. 212(C), pages 1153-1164.
    5. Wanruo Lou & Lingai Luo & Yuchao Hua & Yilin Fan & Zhenyu Du, 2021. "A Review on the Performance Indicators and Influencing Factors for the Thermocline Thermal Energy Storage Systems," Energies, MDPI, vol. 14(24), pages 1-19, December.
    6. Peng, Hao & Li, Rui & Ling, Xiang & Dong, Huihua, 2015. "Modeling on heat storage performance of compressed air in a packed bed system," Applied Energy, Elsevier, vol. 160(C), pages 1-9.
    7. Al-Azawii, Mohammad M.S. & Theade, Carter & Bueno, Pablo & Anderson, Ryan, 2019. "Experimental study of layered thermal energy storage in an air-alumina packed bed using axial pipe injections," Applied Energy, Elsevier, vol. 249(C), pages 409-422.
    8. Attonaty, Kevin & Stouffs, Pascal & Pouvreau, Jérôme & Oriol, Jean & Deydier, Alexandre, 2019. "Thermodynamic analysis of a 200 MWh electricity storage system based on high temperature thermal energy storage," Energy, Elsevier, vol. 172(C), pages 1132-1143.
    9. Calderón-Vásquez, Ignacio & Cortés, Eduardo & García, Jesús & Segovia, Valentina & Caroca, Alejandro & Sarmiento, Cristóbal & Barraza, Rodrigo & Cardemil, José M., 2021. "Review on modeling approaches for packed-bed thermal storage systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 143(C).
    10. Mawire, Ashmore & Ekwomadu, Chidiebere S. & Lefenya, Tlotlo M. & Shobo, Adedamola, 2020. "Performance comparison of two metallic eutectic solder based medium-temperature domestic thermal energy storage systems," Energy, Elsevier, vol. 194(C).
    11. Korba, David & Huang, Wei & Randhir, Kelvin & Petrasch, Joerg & Klausner, James & AuYeung, Nick & Li, Like, 2022. "A continuum model for heat and mass transfer in moving-bed reactors for thermochemical energy storage," Applied Energy, Elsevier, vol. 313(C).
    12. Cui, Zheng & Shao, Wei & Chen, Zhaoyou & Cheng, Lin, 2017. "Mathematical model and numerical solutions for the coupled gas–solid heat transfer process in moving packed beds," Applied Energy, Elsevier, vol. 206(C), pages 1297-1308.
    13. Yang, Bei & Bai, Fengwu & Wang, Yan & Wang, Zhifeng, 2019. "Study on standby process of an air-based solid packed bed for flexible high-temperature heat storage: Experimental results and modelling," Applied Energy, Elsevier, vol. 238(C), pages 135-146.
    14. Kumar, Anil & Kim, Man-Hoe, 2017. "Solar air-heating system with packed-bed energy-storage systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 72(C), pages 215-227.
    15. Sciacovelli, Adriano & Li, Yongliang & Chen, Haisheng & Wu, Yuting & Wang, Jihong & Garvey, Seamus & Ding, Yulong, 2017. "Dynamic simulation of Adiabatic Compressed Air Energy Storage (A-CAES) plant with integrated thermal storage – Link between components performance and plant performance," Applied Energy, Elsevier, vol. 185(P1), pages 16-28.
    16. Calderón-Vásquez, Ignacio & Segovia, Valentina & Cardemil, José M. & Barraza, Rodrigo, 2021. "Assessing the use of copper slags as thermal energy storage material for packed-bed systems," Energy, Elsevier, vol. 227(C).
    17. Zanganeh, G. & Pedretti, A. & Haselbacher, A. & Steinfeld, A., 2015. "Design of packed bed thermal energy storage systems for high-temperature industrial process heat," Applied Energy, Elsevier, vol. 137(C), pages 812-822.
    18. Peng, Hao & Shan, Xuekun & Yang, Yu & Ling, Xiang, 2018. "A study on performance of a liquid air energy storage system with packed bed units," Applied Energy, Elsevier, vol. 211(C), pages 126-135.
    19. He, Wei & Wang, Jihong & Wang, Yang & Ding, Yulong & Chen, Haisheng & Wu, Yuting & Garvey, Seamus, 2017. "Study of cycle-to-cycle dynamic characteristics of adiabatic Compressed Air Energy Storage using packed bed Thermal Energy Storage," Energy, Elsevier, vol. 141(C), pages 2120-2134.
    20. Zhao, Bing-chen & Cheng, Mao-song & Liu, Chang & Dai, Zhi-min, 2017. "Cyclic thermal characterization of a molten-salt packed-bed thermal energy storage for concentrating solar power," Applied Energy, Elsevier, vol. 195(C), pages 761-773.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:251:y:2019:i:c:105. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.