IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v13y2020i9p2292-d354291.html
   My bibliography  Save this article

Optimization of a Small Wind Turbine for a Rural Area: A Case Study of Deniliquin, New South Wales, Australia

Author

Listed:
  • Nour Khlaifat

    (Centre of Green Technology, University of Technology Sydney, Ultimo 2007, Australia)

  • Ali Altaee

    (Centre of Green Technology, University of Technology Sydney, Ultimo 2007, Australia)

  • John Zhou

    (Centre of Green Technology, University of Technology Sydney, Ultimo 2007, Australia)

  • Yuhan Huang

    (Centre of Green Technology, University of Technology Sydney, Ultimo 2007, Australia)

  • Ali Braytee

    (Centre of Green Technology, University of Technology Sydney, Ultimo 2007, Australia)

Abstract

The performance of a wind turbine is affected by wind conditions and blade shape. This study aimed to optimize the performance of a 20 kW horizontal-axis wind turbine (HAWT) under local wind conditions at Deniliquin, New South Wales, Australia. Ansys Fluent (version 18.2, Canonsburg, PA, USA) was used to investigate the aerodynamic performance of the HAWT. The effects of four Reynolds-averaged Navier–Stokes turbulence models on predicting the flows under separation condition were examined. The transition SST model had the best agreement with the NREL CER data. Then, the aerodynamic shape of the rotor was optimized to maximize the annual energy production (AEP) in the Deniliquin region. Statistical wind analysis was applied to define the Weibull function and scale parameters which were 2.096 and 5.042 m/s, respectively. The HARP_Opt (National Renewable Energy Laboratory, Golden, CO, USA) was enhanced with design variables concerning the shape of the blade, rated rotational speed, and pitch angle. The pitch angle remained at 0° while the rising wind speed improved rotor speed to 148.4482 rpm at rated speed. This optimization improved the AEP rate by 9.068% when compared to the original NREL design.

Suggested Citation

  • Nour Khlaifat & Ali Altaee & John Zhou & Yuhan Huang & Ali Braytee, 2020. "Optimization of a Small Wind Turbine for a Rural Area: A Case Study of Deniliquin, New South Wales, Australia," Energies, MDPI, vol. 13(9), pages 1-26, May.
    • Handle: RePEc:gam:jeners:v:13:y:2020:i:9:p:2292-:d:354291
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/13/9/2292/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/13/9/2292/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Du, Zhaohui & Selig, M.S, 2000. "The effect of rotation on the boundary layer of a wind turbine blade," Renewable Energy, Elsevier, vol. 20(2), pages 167-181.
    2. Rocha, P.A. Costa & Rocha, H.H. Barbosa & Carneiro, F.O. Moura & Vieira da Silva, M.E. & Bueno, A. Valente, 2014. "k–ω SST (shear stress transport) turbulence model calibration: A case study on a small scale horizontal axis wind turbine," Energy, Elsevier, vol. 65(C), pages 412-418.
    3. Seo, Jihye & Yi, Jin-Hak & Park, Jin-Soon & Lee, Kwang-Soo, 2019. "Review of tidal characteristics of Uldolmok Strait and optimal design of blade shape for horizontal axis tidal current turbines," Renewable and Sustainable Energy Reviews, Elsevier, vol. 113(C), pages 1-1.
    4. Katsigiannis, Yiannis A. & Stavrakakis, George S., 2014. "Estimation of wind energy production in various sites in Australia for different wind turbine classes: A comparative technical and economic assessment," Renewable Energy, Elsevier, vol. 67(C), pages 230-236.
    5. Lanzafame, R. & Mauro, S. & Messina, M., 2013. "Wind turbine CFD modeling using a correlation-based transitional model," Renewable Energy, Elsevier, vol. 52(C), pages 31-39.
    6. Liu, Xiongwei & Wang, Lin & Tang, Xinzi, 2013. "Optimized linearization of chord and twist angle profiles for fixed-pitch fixed-speed wind turbine blades," Renewable Energy, Elsevier, vol. 57(C), pages 111-119.
    7. Vučina, Damir & Marinić-Kragić, Ivo & Milas, Zoran, 2016. "Numerical models for robust shape optimization of wind turbine blades," Renewable Energy, Elsevier, vol. 87(P2), pages 849-862.
    8. Yingcheng, Xue & Nengling, Tai, 2011. "Review of contribution to frequency control through variable speed wind turbine," Renewable Energy, Elsevier, vol. 36(6), pages 1671-1677.
    9. Sims, Ralph E. H. & Rogner, Hans-Holger & Gregory, Ken, 2003. "Carbon emission and mitigation cost comparisons between fossil fuel, nuclear and renewable energy resources for electricity generation," Energy Policy, Elsevier, vol. 31(13), pages 1315-1326, October.
    10. Li, Yuwei & Paik, Kwang-Jun & Xing, Tao & Carrica, Pablo M., 2012. "Dynamic overset CFD simulations of wind turbine aerodynamics," Renewable Energy, Elsevier, vol. 37(1), pages 285-298.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Kashif Sohail & Hooman Farzaneh, 2022. "Model for Optimal Power Coefficient Tracking and Loss Reduction of the Wind Turbine Systems," Energies, MDPI, vol. 15(11), pages 1-19, June.
    2. Galih Bangga, 2022. "Progress and Outlook in Wind Energy Research," Energies, MDPI, vol. 15(18), pages 1-5, September.
    3. Kehinde A. Adeyeye & Nelson Ijumba & Jonathan S. Colton, 2021. "Multi-Parameter Optimization of Efficiency, Capital Cost and Mass of Ferris Wheel Turbine for Low Wind Speed Regions," Energies, MDPI, vol. 14(19), pages 1-18, September.
    4. Seyed Morteza Alizadeh & Sakineh Sadeghipour & Cagil Ozansoy & Akhtar Kalam, 2020. "Developing a Mathematical Model for Wind Power Plant Siting and Sizing in Distribution Networks," Energies, MDPI, vol. 13(13), pages 1-34, July.
    5. Hosseinzadeh, Ahmad & Zhou, John L. & Li, Xiaowei & Afsari, Morteza & Altaee, Ali, 2022. "Techno-economic and environmental impact assessment of hydrogen production processes using bio-waste as renewable energy resource," Renewable and Sustainable Energy Reviews, Elsevier, vol. 156(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Thé, Jesse & Yu, Hesheng, 2017. "A critical review on the simulations of wind turbine aerodynamics focusing on hybrid RANS-LES methods," Energy, Elsevier, vol. 138(C), pages 257-289.
    2. Amiri, Mojtaba Maali & Shadman, Milad & Estefen, Segen F., 2020. "URANS simulations of a horizontal axis wind turbine under stall condition using Reynolds stress turbulence models," Energy, Elsevier, vol. 213(C).
    3. Shafiqur Rehman & Md. Mahbub Alam & Luai M. Alhems & M. Mujahid Rafique, 2018. "Horizontal Axis Wind Turbine Blade Design Methodologies for Efficiency Enhancement—A Review," Energies, MDPI, vol. 11(3), pages 1-34, February.
    4. Mauro, S. & Lanzafame, R. & Messina, M. & Brusca, S., 2023. "On the importance of the root-to-hub adapter effects on HAWT performance: A CFD-BEM numerical investigation," Energy, Elsevier, vol. 275(C).
    5. Rocha, P. A. Costa & Rocha, H. H. Barbosa & Carneiro, F. O. Moura & da Silva, M. E. Vieira & de Andrade, C. Freitas, 2016. "A case study on the calibration of the k–ω SST (shear stress transport) turbulence model for small scale wind turbines designed with cambered and symmetrical airfoils," Energy, Elsevier, vol. 97(C), pages 144-150.
    6. Liu, Pengyin & Yu, Guohua & Zhu, Xiaocheng & Du, Zhaohui, 2014. "Unsteady aerodynamic prediction for dynamic stall of wind turbine airfoils with the reduced order modeling," Renewable Energy, Elsevier, vol. 69(C), pages 402-409.
    7. Alkhabbaz, Ali & Yang, Ho-Seong & Weerakoon, A.H Samitha & Lee, Young-Ho, 2021. "A novel linearization approach of chord and twist angle distribution for 10 kW horizontal axis wind turbine," Renewable Energy, Elsevier, vol. 178(C), pages 1398-1420.
    8. Hailay Kiros Kelele & Torbjørn Kirstian Nielsen & Lars Froyd & Mulu Bayray Kahsay, 2020. "Catchment Based Aerodynamic Performance Analysis of Small Wind Turbine Using a Single Blade Concept for a Low Cost of Energy," Energies, MDPI, vol. 13(21), pages 1-20, November.
    9. Lee, Kyoungsoo & Huque, Ziaul & Kommalapati, Raghava & Han, Sang-Eul, 2017. "Fluid-structure interaction analysis of NREL phase VI wind turbine: Aerodynamic force evaluation and structural analysis using FSI analysis," Renewable Energy, Elsevier, vol. 113(C), pages 512-531.
    10. Farhan, A. & Hassanpour, A. & Burns, A. & Motlagh, Y. Ghaffari, 2019. "Numerical study of effect of winglet planform and airfoil on a horizontal axis wind turbine performance," Renewable Energy, Elsevier, vol. 131(C), pages 1255-1273.
    11. Jijian Lian & Yaya Jia & Haijun Wang & Fang Liu, 2016. "Numerical Study of the Aerodynamic Loads on Offshore Wind Turbines under Typhoon with Full Wind Direction," Energies, MDPI, vol. 9(8), pages 1-21, August.
    12. Lee, Kyoungsoo & Huque, Ziaul & Kommalapati, Raghava & Han, Sang-Eul, 2016. "Evaluation of equivalent structural properties of NREL phase VI wind turbine blade," Renewable Energy, Elsevier, vol. 86(C), pages 796-818.
    13. Miller, Aaron & Chang, Byungik & Issa, Roy & Chen, Gerald, 2013. "Review of computer-aided numerical simulation in wind energy," Renewable and Sustainable Energy Reviews, Elsevier, vol. 25(C), pages 122-134.
    14. Abdulqadir, Sherwan A. & Iacovides, Hector & Nasser, Adel, 2017. "The physical modelling and aerodynamics of turbulent flows around horizontal axis wind turbines," Energy, Elsevier, vol. 119(C), pages 767-799.
    15. Lin, Yan-Ting & Chiu, Pao-Hsiung & Huang, Chin-Cheng, 2017. "An experimental and numerical investigation on the power performance of 150 kW horizontal axis wind turbine," Renewable Energy, Elsevier, vol. 113(C), pages 85-93.
    16. Hu, Danmei & Hua, Ouyang & Du, Zhaohui, 2006. "A study on stall-delay for horizontal axis wind turbine," Renewable Energy, Elsevier, vol. 31(6), pages 821-836.
    17. Wang, Lin & Liu, Xiongwei & Renevier, Nathalie & Stables, Matthew & Hall, George M., 2014. "Nonlinear aeroelastic modelling for wind turbine blades based on blade element momentum theory and geometrically exact beam theory," Energy, Elsevier, vol. 76(C), pages 487-501.
    18. Wekesa, David Wafula & Wang, Cong & Wei, Yingjie & Danao, Louis Angelo M., 2017. "Analytical and numerical investigation of unsteady wind for enhanced energy capture in a fluctuating free-stream," Energy, Elsevier, vol. 121(C), pages 854-864.
    19. Lai, N.Y.G. & Yap, E.H. & Lee, C.W., 2011. "Viability of CCS: A broad-based assessment for Malaysia," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(8), pages 3608-3616.
    20. Audoly, Richard & Vogt-Schilb, Adrien & Guivarch, Céline & Pfeiffer, Alexander, 2018. "Pathways toward zero-carbon electricity required for climate stabilization," Applied Energy, Elsevier, vol. 225(C), pages 884-901.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:13:y:2020:i:9:p:2292-:d:354291. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.