IDEAS home Printed from https://ideas.repec.org/a/eee/proeco/v133y2011i2p645-652.html
   My bibliography  Save this article

An inventory control model with consideration of remanufacturing and product life cycle

Author

Listed:
  • Hsueh, Che-Fu

Abstract

This paper investigates inventory control policies in a manufacturing/remanufacturing system during the product life cycle, which consists of four phases: introduction, growth, maturity, and decline. Both demand rate and return rate of products are random variables with normal distribution; the mean of the distribution varies according to the time in the product life cycle. Closed-form formulas of optimal production lot size, reorder point, and safety stock in each phase of the product life cycle are derived. A numerical example is presented with sensitivity analysis. The result shows that different inventory control policies should be adopted in different phases of the product life cycle. It is also found that the optimal production lot size and reorder point are not sensitive to the phase length and the demand changing rate.

Suggested Citation

  • Hsueh, Che-Fu, 2011. "An inventory control model with consideration of remanufacturing and product life cycle," International Journal of Production Economics, Elsevier, vol. 133(2), pages 645-652, October.
    • Handle: RePEc:eee:proeco:v:133:y:2011:i:2:p:645-652
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0925527311002131
    Download Restriction: Full text for ScienceDirect subscribers only
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Dobos, Imre, 2003. "Optimal production-inventory strategies for a HMMS-type reverse logistics system," International Journal of Production Economics, Elsevier, vol. 81(1), pages 351-360, January.
    2. Ahiska, S. Sebnem & King, Russell E., 2010. "Life cycle inventory policy characterizations for a single-product recoverable system," International Journal of Production Economics, Elsevier, vol. 124(1), pages 51-61, March.
    3. van der Laan, Erwin A. & Teunter, Ruud H., 2006. "Simple heuristics for push and pull remanufacturing policies," European Journal of Operational Research, Elsevier, vol. 175(2), pages 1084-1102, December.
    4. Mukhopadhyay, Samar K. & Ma, Huafan, 2009. "Joint procurement and production decisions in remanufacturing under quality and demand uncertainty," International Journal of Production Economics, Elsevier, vol. 120(1), pages 5-17, July.
    5. Kiesmuller, Gudrun P. & van der Laan, Erwin A., 2001. "An inventory model with dependent product demands and returns," International Journal of Production Economics, Elsevier, vol. 72(1), pages 73-87, June.
    6. Chung, Chun-Jen & Wee, Hui-Ming, 2011. "Short life-cycle deteriorating product remanufacturing in a green supply chain inventory control system," International Journal of Production Economics, Elsevier, vol. 129(1), pages 195-203, January.
    7. van der Laan, Erwin & Dekker, Rommert & Salomon, Marc & Ridder, Ad, 1996. "An (s, Q) inventory model with remanufacturing and disposal," International Journal of Production Economics, Elsevier, vol. 46(1), pages 339-350, December.
    8. Kiesmuller, G. P., 2003. "Optimal control of a one product recovery system with leadtimes," International Journal of Production Economics, Elsevier, vol. 81(1), pages 333-340, January.
    9. van der Laan, Erwin & Salomon, Marc, 1997. "Production planning and inventory control with remanufacturing and disposal," European Journal of Operational Research, Elsevier, vol. 102(2), pages 264-278, October.
    10. van der Laan, Erwin & Dekker, Rommert & Salomon, Marc, 1996. "Product remanufacturing and disposal: A numerical comparison of alternative control strategies," International Journal of Production Economics, Elsevier, vol. 45(1-3), pages 489-498, August.
    11. Östlin, Johan & Sundin, Erik & Björkman, Mats, 2008. "Importance of closed-loop supply chain relationships for product remanufacturing," International Journal of Production Economics, Elsevier, vol. 115(2), pages 336-348, October.
    12. Erwin van der Laan & Marc Salomon & Rommert Dekker & Luk Van Wassenhove, 1999. "Inventory Control in Hybrid Systems with Remanufacturing," Management Science, INFORMS, vol. 45(5), pages 733-747, May.
    13. van der Laan, Erwin & Salomon, Marc & Dekker, Rommert, 1999. "An investigation of lead-time effects in manufacturing/remanufacturing systems under simple PUSH and PULL control strategies," European Journal of Operational Research, Elsevier, vol. 115(1), pages 195-214, May.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ta-Yu Chen & Woo-Tsong Lin & Chwen Sheu, 2018. "A Dynamic Failure Rate Forecasting Model for Service Parts Inventory," Sustainability, MDPI, vol. 10(7), pages 1-23, July.
    2. Gan, Shu-San & Pujawan, I. Nyoman & Suparno, & Widodo, Basuki, 2017. "Pricing decision for new and remanufactured product in a closed-loop supply chain with separate sales-channel," International Journal of Production Economics, Elsevier, vol. 190(C), pages 120-132.
    3. Zolfagharinia, Hossein & Hafezi, Maryam & Farahani, Reza Zanjirani & Fahimnia, Behnam, 2014. "A hybrid two-stock inventory control model for a reverse supply chain," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 67(C), pages 141-161.
    4. František Milichovský, 2017. "An Impact of Reverse Logistics Activities on Marketing Communication," Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, Mendel University Press, vol. 65(2), pages 669-678.
    5. Barros, Júlio & Cortez, Paulo & Carvalho, M. Sameiro, 2021. "A systematic literature review about dimensioning safety stock under uncertainties and risks in the procurement process," Operations Research Perspectives, Elsevier, vol. 8(C).
    6. Sicilia, Joaquín & González-De-la-Rosa, Manuel & Febles-Acosta, Jaime & Alcaide-López-de-Pablo, David, 2014. "Optimal policy for an inventory system with power demand, backlogged shortages and production rate proportional to demand rate," International Journal of Production Economics, Elsevier, vol. 155(C), pages 163-171.
    7. Govindan, Kannan & Soleimani, Hamed & Kannan, Devika, 2015. "Reverse logistics and closed-loop supply chain: A comprehensive review to explore the future," European Journal of Operational Research, Elsevier, vol. 240(3), pages 603-626.
    8. Panda, Shibaji & Modak, Nikunja Mohan & Cárdenas-Barrón, Leopoldo Eduardo, 2017. "Coordinating a socially responsible closed-loop supply chain with product recycling," International Journal of Production Economics, Elsevier, vol. 188(C), pages 11-21.
    9. Fang, Chih-Chiang, 2020. "Optimal price and warranty decision for durable products in a competitive duopoly market," Reliability Engineering and System Safety, Elsevier, vol. 203(C).
    10. Mabel C. Chou & Chee-Khian Sim & Xue-Ming Yuan, 2020. "Policies for inventory models with product returns forecast from past demands and past sales," Annals of Operations Research, Springer, vol. 288(1), pages 137-180, May.
    11. Gonçalves, João N.C. & Sameiro Carvalho, M. & Cortez, Paulo, 2020. "Operations research models and methods for safety stock determination: A review," Operations Research Perspectives, Elsevier, vol. 7(C).
    12. Li, Gendao & Reimann, Marc & Zhang, Weihua, 2018. "When remanufacturing meets product quality improvement: The impact of production cost," European Journal of Operational Research, Elsevier, vol. 271(3), pages 913-925.
    13. Gan, Shu San & Pujawan, I. Nyoman & Suparno, & Widodo, Basuki, 2015. "Pricing decision model for new and remanufactured short-life cycle products with time-dependent demand," Operations Research Perspectives, Elsevier, vol. 2(C), pages 1-12.
    14. Kumar Jena, Sarat & Sarmah, S.P, 2014. "Price competition and co-operation in a duopoly closed-loop supply chain," International Journal of Production Economics, Elsevier, vol. 156(C), pages 346-360.
    15. Hallak, Bassam K. & Nasr, Walid W. & Jaber, Mohamad Y., 2021. "Re-ordering policies for inventory systems with recyclable items and stochastic demand – Outsourcing vs. in-house recycling," Omega, Elsevier, vol. 105(C).
    16. Seifert, Ralf W. & Tancrez, Jean-Sébastien & Biçer, Işık, 2016. "Dynamic product portfolio management with life cycle considerations," International Journal of Production Economics, Elsevier, vol. 171(P1), pages 71-83.
    17. Taylor, Margaret & Taylor, Andrew, 2012. "The technology life cycle: Conceptualization and managerial implications," International Journal of Production Economics, Elsevier, vol. 140(1), pages 541-553.
    18. Widyadana, Gede Agus & Wee, Hui Ming, 2012. "An economic production quantity model for deteriorating items with multiple production setups and rework," International Journal of Production Economics, Elsevier, vol. 138(1), pages 62-67.
    19. Samarghandi, Hamed, 2017. "Studying the impact of merged and divided storage policies on the profitability of a remanufacturing system with deteriorating revenues," International Journal of Production Economics, Elsevier, vol. 193(C), pages 160-171.
    20. Gmelin, Harald & Seuring, Stefan, 2014. "Achieving sustainable new product development by integrating product life-cycle management capabilities," International Journal of Production Economics, Elsevier, vol. 154(C), pages 166-177.
    21. Gu, Wenjun & Chhajed, Dilip & Petruzzi, Nicholas C. & Yalabik, Baris, 2015. "Quality design and environmental implications of green consumerism in remanufacturing," International Journal of Production Economics, Elsevier, vol. 162(C), pages 55-69.
    22. Wu, Cheng-Han, 2012. "Price and service competition between new and remanufactured products in a two-echelon supply chain," International Journal of Production Economics, Elsevier, vol. 140(1), pages 496-507.
    23. Dong, Ming & Mao, Shunjie & Li, Shan, 2023. "Supplier's technology upgrading investment strategy considering product life cycle," International Journal of Production Economics, Elsevier, vol. 263(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Poles, Roberto, 2013. "System Dynamics modelling of a production and inventory system for remanufacturing to evaluate system improvement strategies," International Journal of Production Economics, Elsevier, vol. 144(1), pages 189-199.
    2. Z P Bayındır & N Erkip & R Güllü, 2005. "Assessing the benefits of remanufacturing option under one-way substitution," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 56(3), pages 286-296, March.
    3. Kim, Eungab & Saghafian, Soroush & Van Oyen, Mark P., 2013. "Joint control of production, remanufacturing, and disposal activities in a hybrid manufacturing–remanufacturing system," European Journal of Operational Research, Elsevier, vol. 231(2), pages 337-348.
    4. Nenes, George & Panagiotidou, Sofia & Dekker, Rommert, 2010. "Inventory control policies for inspection and remanufacturing of returns: A case study," International Journal of Production Economics, Elsevier, vol. 125(2), pages 300-312, June.
    5. Ahiska, S. Sebnem & King, Russell E., 2010. "Life cycle inventory policy characterizations for a single-product recoverable system," International Journal of Production Economics, Elsevier, vol. 124(1), pages 51-61, March.
    6. Bayindir, Z. Pelin & Erkip, Nesim & Gullu, Refik, 2003. "A model to evaluate inventory costs in a remanufacturing environment," International Journal of Production Economics, Elsevier, vol. 81(1), pages 597-607, January.
    7. Gregory A. DeCroix, 2006. "Optimal Policy for a Multiechelon Inventory System with Remanufacturing," Operations Research, INFORMS, vol. 54(3), pages 532-543, June.
    8. Sebnem Ahiska, S. & King, Russell E., 2010. "Inventory optimization in a one product recoverable manufacturing system," International Journal of Production Economics, Elsevier, vol. 124(1), pages 11-19, March.
    9. Bayindir, Z.P. & Erkip, N. & Gullu, R., 2003. "Assessing the benefits of remanufacturing option under one-way substitution and capacity constraint," Econometric Institute Research Papers EI 2003-19, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    10. Zolfagharinia, Hossein & Hafezi, Maryam & Farahani, Reza Zanjirani & Fahimnia, Behnam, 2014. "A hybrid two-stock inventory control model for a reverse supply chain," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 67(C), pages 141-161.
    11. Kilic, Onur A. & Tunc, Huseyin & Tarim, S. Armagan, 2018. "Heuristic policies for the stochastic economic lot sizing problem with remanufacturing under service level constraints," European Journal of Operational Research, Elsevier, vol. 267(3), pages 1102-1109.
    12. Feng, Yan & Viswanathan, S., 2014. "Heuristics with guaranteed performance bounds for a manufacturing system with product recovery," European Journal of Operational Research, Elsevier, vol. 232(2), pages 322-329.
    13. Vercraene, Samuel & Gayon, Jean-Philippe & Flapper, Simme Douwe, 2014. "Coordination of manufacturing, remanufacturing and returns acceptance in hybrid manufacturing/remanufacturing systems," International Journal of Production Economics, Elsevier, vol. 148(C), pages 62-70.
    14. Duong, Quang Huy & Zhou, Li & Meng, Meng & Nguyen, Truong Van & Ieromonachou, Petros & Nguyen, Duy Tiep, 2022. "Understanding product returns: A systematic literature review using machine learning and bibliometric analysis," International Journal of Production Economics, Elsevier, vol. 243(C).
    15. Huynh, Candice H. & So, Kut C. & Gurnani, Haresh, 2016. "Managing a closed-loop supply system with random returns and a cyclic delivery schedule," European Journal of Operational Research, Elsevier, vol. 255(3), pages 787-796.
    16. V. Daniel R. Guide & Vaidyanathan Jayaraman & Rajesh Srivastava & W. C. Benton, 2000. "Supply-Chain Management for Recoverable Manufacturing Systems," Interfaces, INFORMS, vol. 30(3), pages 125-142, June.
    17. Fleischmann, Moritz & Kuik, Roelof, 2003. "On optimal inventory control with independent stochastic item returns," European Journal of Operational Research, Elsevier, vol. 151(1), pages 25-37, November.
    18. Jian Yang & Boaz Golany & Gang Yu, 2005. "A concave‐cost production planning problem with remanufacturing options," Naval Research Logistics (NRL), John Wiley & Sons, vol. 52(5), pages 443-458, August.
    19. Erwin van der Laan & Marc Salomon & Rommert Dekker & Luk Van Wassenhove, 1999. "Inventory Control in Hybrid Systems with Remanufacturing," Management Science, INFORMS, vol. 45(5), pages 733-747, May.
    20. Dev, Navin K. & Shankar, Ravi & Choudhary, Alok, 2017. "Strategic design for inventory and production planning in closed-loop hybrid systems," International Journal of Production Economics, Elsevier, vol. 183(PB), pages 345-353.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:proeco:v:133:y:2011:i:2:p:645-652. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/ijpe .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.