IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v331y2023ics0306261922016154.html
   My bibliography  Save this article

Hybrid PCM-steam thermal energy storage for industrial processes – Link between thermal phenomena and techno-economic performance through dynamic modelling

Author

Listed:
  • Niknam, Pouriya H
  • Sciacovelli, Adriano

Abstract

This study aims to assess the performance and economics of novel hybrid thermal energy storage (HyTES) for industrial applications, linking performance to thermal phenomena occurring within the system. The storage hybridisation concept is based on coupling latent heat storage modules containing high-temperature Phase Change Materials (PCMs) with a fast-response steam accumulator. Such hybrid storage, where heat is stored in both forms of steam and latent heat of PCMs, has the potential to capture excess heat produced by the steam generator of any industrial processes, which can then be used at peak times. HyTES performance is dynamically modelled during charging, idle, and discharging stages. The results show that the HyTES provides 14% extra energy storage capacity than the existing steam accumulator within an identical total volume. Furthermore, the study provides technical analysis of HyTES, and thorough comparison between configurations with different PCM volumes, PCM types and charging times. This is essential to ultimately quantify the whole range of benefit of hybrid energy storage. The sensitivity analysis reveals that Incorporating the HyTES significantly improves energy capacity, and the degree of improvement is mainly affected by the charge duration, approximately 15% after 1 h, and 45% after 4 h of charging. Furthermore, it is shown how the PCM properties affect the performance of HyTES. Finally, the CAPEX and O&M cost of the entire system are assessed in different scenarios and found to be 5% less when HyTES replaces the conventional SA.

Suggested Citation

  • Niknam, Pouriya H & Sciacovelli, Adriano, 2023. "Hybrid PCM-steam thermal energy storage for industrial processes – Link between thermal phenomena and techno-economic performance through dynamic modelling," Applied Energy, Elsevier, vol. 331(C).
    • Handle: RePEc:eee:appene:v:331:y:2023:i:c:s0306261922016154
    DOI: 10.1016/j.apenergy.2022.120358
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261922016154
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2022.120358?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Le, Tam-Tri, 2022. "Natural and social survival: the drivers of serendipity," OSF Preprints 34xys, Center for Open Science.
    2. Richard S. J. Tol, 2022. "State capacity and vulnerability to natural disasters," Chapters, in: Mark Skidmore (ed.), Handbook on the Economics of Disasters, chapter 20, pages 434-457, Edward Elgar Publishing.
    3. René Hofmann & Sabrina Dusek & Stephan Gruber & Gerwin Drexler-Schmid, 2019. "Design Optimization of a Hybrid Steam-PCM Thermal Energy Storage for Industrial Applications," Energies, MDPI, vol. 12(5), pages 1-25, March.
    4. Dusek, Sabrina & Hofmann, René & Gruber, Stephan, 2019. "Design analysis of a hybrid storage concept combining Ruths steam storage and latent thermal energy storage," Applied Energy, Elsevier, vol. 251(C), pages 1-1.
    5. Yeh, Sonia & Rubin, Edward S., 2007. "A centurial history of technological change and learning curves for pulverized coal-fired utility boilers," Energy, Elsevier, vol. 32(10), pages 1996-2005.
    6. Narayanan, Shankar & Li, Xiansen & Yang, Sungwoo & Kim, Hyunho & Umans, Ari & McKay, Ian S. & Wang, Evelyn N., 2015. "Thermal battery for portable climate control," Applied Energy, Elsevier, vol. 149(C), pages 104-116.
    7. Sabrina Dusek & René Hofmann, 2019. "Modeling of a Hybrid Steam Storage and Validation with an Industrial Ruths Steam Storage Line," Energies, MDPI, vol. 12(6), pages 1-21, March.
    8. Suzanne A. G. Leroy & Raisa Gracheva & Andrei Medvedev, 2022. "Natural hazards and disasters around the Caspian Sea," Natural Hazards: Journal of the International Society for the Prevention and Mitigation of Natural Hazards, Springer;International Society for the Prevention and Mitigation of Natural Hazards, vol. 114(3), pages 2435-2478, December.
    9. Zauner, Christoph & Hengstberger, Florian & Mörzinger, Benjamin & Hofmann, Rene & Walter, Heimo, 2017. "Experimental characterization and simulation of a hybrid sensible-latent heat storage," Applied Energy, Elsevier, vol. 189(C), pages 506-519.
    10. Ron-Hendrik Hechelmann & Jan-Peter Seevers & Alexander Otte & Jan Sponer & Matthias Stark, 2020. "Renewable Energy Integration for Steam Supply of Industrial Processes—A Food Processing Case Study," Energies, MDPI, vol. 13(10), pages 1-20, May.
    11. Ding, Zhixiong & Wu, Wei & Leung, Michael, 2021. "Advanced/hybrid thermal energy storage technology: material, cycle, system and perspective," Renewable and Sustainable Energy Reviews, Elsevier, vol. 145(C).
    12. Lai, Shaojie & Chen, Lihan & Wang, Qing Sophie & Anderson, Hamish, 2022. "Natural disasters, trade credit, and firm performance," Economic Modelling, Elsevier, vol. 116(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Zhangyang Kang & Wu Zhou & Kaijie Qiu & Chaojie Wang & Zhaolong Qin & Bingyang Zhang & Qiongqiong Yao, 2023. "Numerical Simulation of an Indirect Contact Mobilized Thermal Energy Storage Container with Different Tube Bundle Layout and Fin Structure," Sustainability, MDPI, vol. 15(6), pages 1-13, March.
    2. Kasper, Lukas & Pernsteiner, Dominik & Schirrer, Alexander & Jakubek, Stefan & Hofmann, René, 2023. "Experimental characterization, parameter identification and numerical sensitivity analysis of a novel hybrid sensible/latent thermal energy storage prototype for industrial retrofit applications," Applied Energy, Elsevier, vol. 344(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Kasper, Lukas & Pernsteiner, Dominik & Schirrer, Alexander & Jakubek, Stefan & Hofmann, René, 2023. "Experimental characterization, parameter identification and numerical sensitivity analysis of a novel hybrid sensible/latent thermal energy storage prototype for industrial retrofit applications," Applied Energy, Elsevier, vol. 344(C).
    2. René Hofmann & Sabrina Dusek & Stephan Gruber & Gerwin Drexler-Schmid, 2019. "Design Optimization of a Hybrid Steam-PCM Thermal Energy Storage for Industrial Applications," Energies, MDPI, vol. 12(5), pages 1-25, March.
    3. Dusek, Sabrina & Hofmann, René & Gruber, Stephan, 2019. "Design analysis of a hybrid storage concept combining Ruths steam storage and latent thermal energy storage," Applied Energy, Elsevier, vol. 251(C), pages 1-1.
    4. Nagel, Thomas & Beckert, Steffen & Lehmann, Christoph & Gläser, Roger & Kolditz, Olaf, 2016. "Multi-physical continuum models of thermochemical heat storage and transformation in porous media and powder beds—A review," Applied Energy, Elsevier, vol. 178(C), pages 323-345.
    5. Gordeeva, L.G. & Aristov, Yu.I., 2019. "Adsorptive heat storage and amplification: New cycles and adsorbents," Energy, Elsevier, vol. 167(C), pages 440-453.
    6. Ma, Zhao & Li, Ming-Jia & Zhang, K. Max & Yuan, Fan, 2021. "Novel designs of hybrid thermal energy storage system and operation strategies for concentrated solar power plant," Energy, Elsevier, vol. 216(C).
    7. Jindal, Abhinav & Nilakantan, Rahul, 2021. "Falling efficiency levels of Indian coal-fired power plants: A slacks-based analysis," Energy Economics, Elsevier, vol. 93(C).
    8. Wolf, Isabel & Holzapfel, Peter K.R. & Meschede, Henning & Finkbeiner, Matthias, 2023. "On the potential of temporally resolved GHG emission factors for load shifting: A case study on electrified steam generation," Applied Energy, Elsevier, vol. 348(C).
    9. Henrique Oliveira & Víctor Moutinho, 2021. "Renewable Energy, Economic Growth and Economic Development Nexus: A Bibliometric Analysis," Energies, MDPI, vol. 14(15), pages 1-28, July.
    10. Kemp, Alexander G. & Kasim, Sola, 2010. "An Optimised Illustrative Investment Model Of The Economics Of Integrated Returns From CCS Deployment In The UK/UKCS," SIRE Discussion Papers 2010-126, Scottish Institute for Research in Economics (SIRE).
    11. Kemp, Alexander G. & Sola Kasim, A., 2010. "A futuristic least-cost optimisation model of CO2 transportation and storage in the UK/UK Continental Shelf," Energy Policy, Elsevier, vol. 38(7), pages 3652-3667, July.
    12. Zhao, Weiwei & Zhang, Tongtong & Kildahl, Harriet & Ding, Yulong, 2022. "Mobile energy recovery and storage: Multiple energy-powered EVs and refuelling stations," Energy, Elsevier, vol. 257(C).
    13. Vigneshwaran, K. & Sodhi, Gurpreet Singh & Muthukumar, P. & Guha, Anurag & Senthilmurugan, S., 2019. "Experimental and numerical investigations on high temperature cast steel based sensible heat storage system," Applied Energy, Elsevier, vol. 251(C), pages 1-1.
    14. Braimakis, Konstantinos & Atsonios, Konstantinos & Panopoulos, Kyriakos D. & Karellas, Sotirios & Kakaras, Emmanuel, 2014. "Economic evaluation of decentralized pyrolysis for the production of bio-oil as an energy carrier for improved logistics towards a large centralized gasification plant," Renewable and Sustainable Energy Reviews, Elsevier, vol. 35(C), pages 57-72.
    15. Zhang, Yong & Hu, Mingke & Chen, Ziwei & Su, Yuehong & Riffat, Saffa, 2023. "Modelling analysis of a solar-driven thermochemical energy storage unit combined with heat recovery," Renewable Energy, Elsevier, vol. 206(C), pages 722-737.
    16. Zeng, Ziya & Zhao, Bingchen & Chen, Weidong & Ernest Chua, Kian Jon & Wang, Ruzhu, 2023. "Strategies of stable thermal output and humidity dual control for a packed-bed adsorption thermal battery," Energy, Elsevier, vol. 278(PA).
    17. Saidur, R. & Ahamed, J.U. & Masjuki, H.H., 2010. "Energy, exergy and economic analysis of industrial boilers," Energy Policy, Elsevier, vol. 38(5), pages 2188-2197, May.
    18. Yang, Lin & Lv, Haodong & Wei, Ning & Li, Yiming & Zhang, Xian, 2023. "Dynamic optimization of carbon capture technology deployment targeting carbon neutrality, cost efficiency and water stress: Evidence from China's electric power sector," Energy Economics, Elsevier, vol. 125(C).
    19. Rubin, Edward S. & Azevedo, Inês M.L. & Jaramillo, Paulina & Yeh, Sonia, 2015. "A review of learning rates for electricity supply technologies," Energy Policy, Elsevier, vol. 86(C), pages 198-218.
    20. Tokarev, Mikhail M. & Gordeeva, Larisa G. & Grekova, Alexandra D. & Aristov, Yuri I., 2018. "Adsorption cycle “heat from cold” for upgrading the ambient heat: The testing a lab-scale prototype with the composite sorbent CaClBr/silica," Applied Energy, Elsevier, vol. 211(C), pages 136-145.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:331:y:2023:i:c:s0306261922016154. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.