IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v259y2020ics030626191931801x.html
   My bibliography  Save this article

Development of an Energy Efficient Extrusion Factory employing a latent heat storage and a high temperature heat pump

Author

Listed:
  • Zauner, Christoph
  • Windholz, Bernd
  • Lauermann, Michael
  • Drexler-Schmid, Gerwin
  • Leitgeb, Thomas

Abstract

Waste heat recovery and utilization is critical to cut CO2 emissions in industry. Extrusion is a generic process used to produce many different goods from various raw materials. We describe the current state of the a polymer compounding extrusion factory and describe its energy flows and processes. Currently, no waste heat recovery and utilization is common. Thus, we developed a completely new Energy Efficient Extrusion Factory concept based on an insulated hot water bath, a high temperature heat pump and a latent heat storage enabling extensive waste heat recovery and utilization within different hot processes as well as space heating. We outline our concept in great detail, describe its main technological components including simulations and present experimental results of a real demonstration factory at the company Geba Kunststofftechnik in St. Veit, Austria. Finally, we perform economical calculations for a fictitious but archetypal Energy Efficient Extrusion Factory and show that the return on investment can be less than three years.

Suggested Citation

  • Zauner, Christoph & Windholz, Bernd & Lauermann, Michael & Drexler-Schmid, Gerwin & Leitgeb, Thomas, 2020. "Development of an Energy Efficient Extrusion Factory employing a latent heat storage and a high temperature heat pump," Applied Energy, Elsevier, vol. 259(C).
    • Handle: RePEc:eee:appene:v:259:y:2020:i:c:s030626191931801x
    DOI: 10.1016/j.apenergy.2019.114114
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S030626191931801X
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2019.114114?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Qv, Dehu & Ni, Long & Yao, Yang & Hu, Wenju, 2015. "Reliability verification of a solar–air source heat pump system with PCM energy storage in operating strategy transition," Renewable Energy, Elsevier, vol. 84(C), pages 46-55.
    2. He, He & Reynolds, Christian John & Li, Linyang & Boland, John, 2019. "Assessing net energy consumption of Australian economy from 2004–05 to 2014–15: Environmentally-extended input-output analysis, structural decomposition analysis, and linkage analysis," Applied Energy, Elsevier, vol. 240(C), pages 766-777.
    3. Merlin, Kevin & Soto, Jérôme & Delaunay, Didier & Traonvouez, Luc, 2016. "Industrial waste heat recovery using an enhanced conductivity latent heat thermal energy storage," Applied Energy, Elsevier, vol. 183(C), pages 491-503.
    4. Forman, Clemens & Muritala, Ibrahim Kolawole & Pardemann, Robert & Meyer, Bernd, 2016. "Estimating the global waste heat potential," Renewable and Sustainable Energy Reviews, Elsevier, vol. 57(C), pages 1568-1579.
    5. Royo, Patricia & Acevedo, Luis & Ferreira, Victor J. & García-Armingol, Tatiana & López-Sabirón, Ana M. & Ferreira, Germán, 2019. "High-temperature PCM-based thermal energy storage for industrial furnaces installed in energy-intensive industries," Energy, Elsevier, vol. 173(C), pages 1030-1040.
    6. Shi, Xunpeng, 2014. "Setting effective mandatory energy efficiency standards and labelling regulations: A review of best practices in the Asia Pacific region," Applied Energy, Elsevier, vol. 133(C), pages 135-143.
    7. Khouya, A. & Draoui, A., 2019. "Computational drying model for solar kiln with latent heat energy storage: Case studies of thermal application," Renewable Energy, Elsevier, vol. 130(C), pages 796-813.
    8. Malinauskaite, J. & Jouhara, H. & Ahmad, L. & Milani, M. & Montorsi, L. & Venturelli, M., 2019. "Energy efficiency in industry: EU and national policies in Italy and the UK," Energy, Elsevier, vol. 172(C), pages 255-269.
    9. Bühler, Fabian & Guminski, Andrej & Gruber, Anna & Nguyen, Tuong-Van & von Roon, Serafin & Elmegaard, Brian, 2018. "Evaluation of energy saving potentials, costs and uncertainties in the chemical industry in Germany," Applied Energy, Elsevier, vol. 228(C), pages 2037-2049.
    10. Abeykoon, Chamil & Kelly, Adrian L. & Vera-Sorroche, Javier & Brown, Elaine C. & Coates, Phil D. & Deng, Jing & Li, Kang & Harkin-Jones, Eileen & Price, Mark, 2014. "Process efficiency in polymer extrusion: Correlation between the energy demand and melt thermal stability," Applied Energy, Elsevier, vol. 135(C), pages 560-571.
    11. Li, Dacheng & Wang, Jihong & Ding, Yulong & Yao, Hua & Huang, Yun, 2019. "Dynamic thermal management for industrial waste heat recovery based on phase change material thermal storage," Applied Energy, Elsevier, vol. 236(C), pages 1168-1182.
    12. Yu, Xiaoli & Li, Zhi & Lu, Yiji & Huang, Rui & Roskilly, Anthony Paul, 2019. "Investigation of organic Rankine cycle integrated with double latent thermal energy storage for engine waste heat recovery," Energy, Elsevier, vol. 170(C), pages 1098-1112.
    13. Li, Ming-Jia & Tao, Wen-Quan, 2017. "Review of methodologies and polices for evaluation of energy efficiency in high energy-consuming industry," Applied Energy, Elsevier, vol. 187(C), pages 203-215.
    14. Xu, Z.Y. & Wang, R.Z. & Yang, Chun, 2019. "Perspectives for low-temperature waste heat recovery," Energy, Elsevier, vol. 176(C), pages 1037-1043.
    15. Zhang, Qi & Zhao, Xiaoyu & Lu, Hongyou & Ni, Tuanjie & Li, Yu, 2017. "Waste energy recovery and energy efficiency improvement in China’s iron and steel industry," Applied Energy, Elsevier, vol. 191(C), pages 502-520.
    16. Ji, Chenzhen & Qin, Zhen & Dubey, Swapnil & Choo, Fook Hoong & Duan, Fei, 2017. "Three-dimensional transient numerical study on latent heat thermal storage for waste heat recovery from a low temperature gas flow," Applied Energy, Elsevier, vol. 205(C), pages 1-12.
    17. Wu, Jianghong & Yang, Zhaoguang & Wu, Qinghao & Zhu, Yujuan, 2012. "Transient behavior and dynamic performance of cascade heat pump water heater with thermal storage system," Applied Energy, Elsevier, vol. 91(1), pages 187-196.
    18. Zauner, Christoph & Hengstberger, Florian & Mörzinger, Benjamin & Hofmann, Rene & Walter, Heimo, 2017. "Experimental characterization and simulation of a hybrid sensible-latent heat storage," Applied Energy, Elsevier, vol. 189(C), pages 506-519.
    19. Zuberi, M. Jibran S. & Bless, Frédéric & Chambers, Jonathan & Arpagaus, Cordin & Bertsch, Stefan S. & Patel, Martin K., 2018. "Excess heat recovery: An invisible energy resource for the Swiss industry sector," Applied Energy, Elsevier, vol. 228(C), pages 390-408.
    20. Zou, Deqiu & Ma, Xianfeng & Liu, Xiaoshi & Zheng, Pengjun & Cai, Baiming & Huang, Jianfeng & Guo, Jiangrong & Liu, Mo, 2017. "Experimental research of an air-source heat pump water heater using water-PCM for heat storage," Applied Energy, Elsevier, vol. 206(C), pages 784-792.
    21. Wang, Xuan & Jin, Ming & Feng, Wei & Shu, Gequn & Tian, Hua & Liang, Youcai, 2018. "Cascade energy optimization for waste heat recovery in distributed energy systems," Applied Energy, Elsevier, vol. 230(C), pages 679-695.
    22. Zauner, Christoph & Hengstberger, Florian & Etzel, Mark & Lager, Daniel & Hofmann, Rene & Walter, Heimo, 2016. "Experimental characterization and simulation of a fin-tube latent heat storage using high density polyethylene as PCM," Applied Energy, Elsevier, vol. 179(C), pages 237-246.
    23. Abeykoon, Chamil & Kelly, Adrian L. & Brown, Elaine C. & Vera-Sorroche, Javier & Coates, Phil D. & Harkin-Jones, Eileen & Howell, Ken B. & Deng, Jing & Li, Kang & Price, Mark, 2014. "Investigation of the process energy demand in polymer extrusion: A brief review and an experimental study," Applied Energy, Elsevier, vol. 136(C), pages 726-737.
    24. Anasis, John G. & Khalil, Mohammad Aslam Khan & Butenhoff, Christopher & Bluffstone, Randall & Lendaris, George G., 2019. "Optimal energy resource mix for the US and China to meet emissions pledges," Applied Energy, Elsevier, vol. 238(C), pages 92-100.
    25. Ringel, Marc & Schlomann, Barbara & Krail, Michael & Rohde, Clemens, 2016. "Towards a green economy in Germany? The role of energy efficiency policies," Applied Energy, Elsevier, vol. 179(C), pages 1293-1303.
    26. Varga, Zoltán & Palotai, Balázs, 2017. "Comparison of low temperature waste heat recovery methods," Energy, Elsevier, vol. 137(C), pages 1286-1292.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Wenhe Zhou & Bin Wang & Meng Wang & Yuying Chen, 2022. "Performance Analysis of the Coupled Heating System of the Air-Source Heat Pump, the Energy Accumulator and the Water-Source Heat Pump," Energies, MDPI, vol. 15(19), pages 1-11, October.
    2. Du, Ruxue & Wu, Minqiang & Wang, Siqi & Wu, Si & Wang, Ruzhu & Li, Tingxian, 2022. "Experimental investigation on high energy-density and power-density hydrated salt-based thermal energy storage," Applied Energy, Elsevier, vol. 325(C).
    3. Eneja Osterman & Claudio Del Pero & Eva Zavrl & Fabrizio Leonforte & Niccolò Aste & Uroš Stritih, 2023. "Phase-Change Material Thermal Energy Storage for the Smart Retrofitting of Existing Buildings," Energies, MDPI, vol. 16(17), pages 1-13, August.
    4. Jiang, Zhu & Palacios, Anabel & Zou, Boyang & Zhao, Yanqi & Deng, Weiyu & Zhang, Xiaosong & Ding, Yulong, 2022. "A review on the fabrication methods for structurally stabilised composite phase change materials and their impacts on the properties of materials," Renewable and Sustainable Energy Reviews, Elsevier, vol. 159(C).
    5. Liu, Changchun & Han, Wei & Xue, Xiaodong, 2022. "Experimental investigation of a high-temperature heat pump for industrial steam production," Applied Energy, Elsevier, vol. 312(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Waser, R. & Ghani, F. & Maranda, S. & O'Donovan, T.S. & Schuetz, P. & Zaglio, M. & Worlitschek, J., 2018. "Fast and experimentally validated model of a latent thermal energy storage device for system level simulations," Applied Energy, Elsevier, vol. 231(C), pages 116-126.
    2. Ünal, Berat Berkan & Onaygil, Sermin & Acuner, Ebru & Cin, Rabia, 2022. "Application of energy efficiency obligation scheme for electricity distribution companies in Turkey," Energy Policy, Elsevier, vol. 163(C).
    3. Lin, Yuancheng & Chong, Chin Hao & Ma, Linwei & Li, Zheng & Ni, Weidou, 2022. "Quantification of waste heat potential in China: A top-down Societal Waste Heat Accounting Model," Energy, Elsevier, vol. 261(PB).
    4. Khayyam, Hamid & Naebe, Minoo & Milani, Abbas S. & Fakhrhoseini, Seyed Mousa & Date, Abhijit & Shabani, Bahman & Atkiss, Steve & Ramakrishna, Seeram & Fox, Bronwyn & Jazar, Reza N., 2021. "Improving energy efficiency of carbon fiber manufacturing through waste heat recovery: A circular economy approach with machine learning," Energy, Elsevier, vol. 225(C).
    5. Dokl, Monika & Gomilšek, Rok & Čuček, Lidija & Abikoye, Ben & Kravanja, Zdravko, 2022. "Maximizing the power output and net present value of organic Rankine cycle: Application to aluminium industry," Energy, Elsevier, vol. 239(PE).
    6. Serge Nyallang Nyamsi & Mykhaylo Lototskyy & Ivan Tolj, 2020. "Optimal Design of Combined Two-Tank Latent and Metal Hydrides-Based Thermochemical Heat Storage Systems for High-Temperature Waste Heat Recovery," Energies, MDPI, vol. 13(16), pages 1-18, August.
    7. Qin, Zhen & Ji, Chenzhen & Low, Zheng Hua & Tong, Wei & Wu, Chenlong & Duan, Fei, 2022. "Geometry effect of phase change material container on waste heat recovery enhancement," Applied Energy, Elsevier, vol. 327(C).
    8. Hu, Yige & Wang, Hang & Chen, Hu & Ding, Yang & Liu, Changtian & Jiang, Feng & Ling, Xiang, 2023. "A novel hydrated salt-based phase change material for medium- and low-thermal energy storage," Energy, Elsevier, vol. 274(C).
    9. Serge Nyallang Nyamsi & Ivan Tolj & Mykhaylo Lototskyy, 2019. "Metal Hydride Beds-Phase Change Materials: Dual Mode Thermal Energy Storage for Medium-High Temperature Industrial Waste Heat Recovery," Energies, MDPI, vol. 12(20), pages 1-27, October.
    10. Ma, Zhao & Li, Ming-Jia & Zhang, K. Max & Yuan, Fan, 2021. "Novel designs of hybrid thermal energy storage system and operation strategies for concentrated solar power plant," Energy, Elsevier, vol. 216(C).
    11. Rendall, Joseph & Elatar, Ahmed & Nawaz, Kashif & Sun, Jian, 2023. "Medium-temperature phase change material integration in domestic heat pump water heaters for improved thermal energy storage," Renewable and Sustainable Energy Reviews, Elsevier, vol. 185(C).
    12. Li, Xiaoqiong & Wang, Xiaoyan & Zhang, Yufeng & Fang, Lei & Deng, Na & Zhang, Yan & Jin, Zhendong & Yu, Xiaohui & Yao, Sheng, 2020. "Experimental and economic analysis with a novel ejector-based detection system for thermodynamic measurement of compressors," Applied Energy, Elsevier, vol. 261(C).
    13. Ortega-Fernández, Iñigo & Rodríguez-Aseguinolaza, Javier, 2019. "Thermal energy storage for waste heat recovery in the steelworks: The case study of the REslag project," Applied Energy, Elsevier, vol. 237(C), pages 708-719.
    14. Meng, Z.N. & Zhang, P., 2017. "Experimental and numerical investigation of a tube-in-tank latent thermal energy storage unit using composite PCM," Applied Energy, Elsevier, vol. 190(C), pages 524-539.
    15. Wang, Hang & Hu, Yige & Jiang, Feng & Ling, Xiang, 2022. "Thermal performance of industrial-grade CH3COONa·3H2O-based composite phase change materials in a plate heat storage unit," Energy, Elsevier, vol. 261(PA).
    16. Miriam Benedetti & Daniele Dadi & Lorena Giordano & Vito Introna & Pasquale Eduardo Lapenna & Annalisa Santolamazza, 2021. "Design of a Database of Case Studies and Technologies to Increase the Diffusion of Low-Temperature Waste Heat Recovery in the Industrial Sector," Sustainability, MDPI, vol. 13(9), pages 1-19, May.
    17. Adriana Reyes-Lúa & Julian Straus & Vidar T. Skjervold & Goran Durakovic & Tom Ståle Nordtvedt, 2021. "A Novel Concept for Sustainable Food Production Utilizing Low Temperature Industrial Surplus Heat," Sustainability, MDPI, vol. 13(17), pages 1-23, August.
    18. Chen, Xue & Li, Xiaolei & Xia, Xinlin & Sun, Chuang & Liu, Rongqiang, 2021. "Thermal storage analysis of a foam-filled PCM heat exchanger subjected to fluctuating flow conditions," Energy, Elsevier, vol. 216(C).
    19. Marco Briceño-León & Dennys Pazmiño-Quishpe & Jean-Michel Clairand & Guillermo Escrivá-Escrivá, 2021. "Energy Efficiency Measures in Bakeries toward Competitiveness and Sustainability—Case Studies in Quito, Ecuador," Sustainability, MDPI, vol. 13(9), pages 1-20, May.
    20. Ding, Zhixiong & Wu, Wei & Leung, Michael, 2021. "Advanced/hybrid thermal energy storage technology: material, cycle, system and perspective," Renewable and Sustainable Energy Reviews, Elsevier, vol. 145(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:259:y:2020:i:c:s030626191931801x. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.