IDEAS home Printed from https://ideas.repec.org/a/spr/nathaz/v75y2015i1p581-611.html
   My bibliography  Save this article

Risk assessment of environmental corrosion for reinforcing steel bars embedded in concrete in Taiwan

Author

Listed:
  • Chien-Kuo Chiu
  • Fung-Chung Tu
  • Cheng-Yu Fan

Abstract

The main purpose of this work is to propose novel computational procedures for calculating the risk of corrosion of reinforcing steel bars induced by the environmental hazards including chloride ingress and carbonation in Taiwan; then, it can also be used to identify the appropriate thickness of a concrete cover for meeting a specified durability performance. Using the risk curve of corrosion of reinforcing steel bars, building designers can set an allowable reliability to discuss the durability of code-suggested minimal thicknesses of concrete covers for reinforced concrete (RC) members in Taiwan. Based on the simulation results, when a RC member is located within 0.3 km from the nearest coastline, along with the concrete cover, the concrete mix and surface coatings should be used as barriers to mitigate the corrosion risk for reinforcing steel bars. Additionally, considering the corrosion risk induced by carbonation and chloride ingress for a RC member with a specified service life of 50 years, which is most common setting in the building design, the minimal required thickness of concrete covers can be set as 7.5 cm when the member is located at 0.3–1.0 km from the nearest coastline. For a RC member located father than 1.0 km from the nearest coastline, its minimal required thickness of concrete covers can be set as 4 cm for the same required durable reliability. Although this work used a specified corrosion degree to calculate reliability of RC members with a specified concrete-cover thickness, the proposed computational procedures for deriving the corrosion risk of reinforcing steel bars can be applied to evaluate the effectiveness of various concrete-cover thicknesses on the mitigation of the corrosion risk. Copyright Springer Science+Business Media Dordrecht 2015

Suggested Citation

  • Chien-Kuo Chiu & Fung-Chung Tu & Cheng-Yu Fan, 2015. "Risk assessment of environmental corrosion for reinforcing steel bars embedded in concrete in Taiwan," Natural Hazards: Journal of the International Society for the Prevention and Mitigation of Natural Hazards, Springer;International Society for the Prevention and Mitigation of Natural Hazards, vol. 75(1), pages 581-611, January.
    • Handle: RePEc:spr:nathaz:v:75:y:2015:i:1:p:581-611
    DOI: 10.1007/s11069-014-1349-3
    as

    Download full text from publisher

    File URL: http://hdl.handle.net/10.1007/s11069-014-1349-3
    Download Restriction: Access to full text is restricted to subscribers.
    File URL: https://libkey.io/10.1007/s11069-014-1349-3?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Choe, Do-Eun & Gardoni, Paolo & Rosowsky, David & Haukaas, Terje, 2008. "Probabilistic capacity models and seismic fragility estimates for RC columns subject to corrosion," Reliability Engineering and System Safety, Elsevier, vol. 93(3), pages 383-393.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Vishwanath, B Sharanbaswa & Banerjee, Swagata, 2023. "Considering uncertainty in corrosion process to estimate life-cycle seismic vulnerability and risk of aging bridge piers," Reliability Engineering and System Safety, Elsevier, vol. 232(C).
    2. Morshedi, Mohamad Ali & Kashani, Hamed, 2022. "Assessment of vulnerability reduction policies: Integration of economic and cognitive models of decision-making," Reliability Engineering and System Safety, Elsevier, vol. 217(C).
    3. Yan Liang & Jia-lei Yan & Jun-lei Wang & Peng Zhang & Bao-jie He, 2019. "Analysis on the Time-Varying Fragility of Offshore Concrete Bridge," Complexity, Hindawi, vol. 2019, pages 1-22, January.
    4. He, Jingjing & Huang, Min & Wang, Wei & Wang, Shaohua & Guan, Xuefei, 2021. "An asymptotic stochastic response surface approach to reliability assessment under multi-source heterogeneous uncertainties," Reliability Engineering and System Safety, Elsevier, vol. 215(C).
    5. Ghosh, Jayadipta & Sood, Piyush, 2016. "Consideration of time-evolving capacity distributions and improved degradation models for seismic fragility assessment of aging highway bridges," Reliability Engineering and System Safety, Elsevier, vol. 154(C), pages 197-218.
    6. Gangolu, Jaswanth & Kumar, Ajay & Bhuyan, Kasturi & Sharma, Hrishikesh, 2022. "Probabilistic demand models and performance-based fragility estimates for concrete protective structures subjected to missile impact," Reliability Engineering and System Safety, Elsevier, vol. 223(C).
    7. Zhao, Yan-Gang & Qin, Miao-Jun & Lu, Zhao-Hui & Zhang, Long-Wen, 2021. "Seismic fragility analysis of nuclear power plants considering structural parameter uncertainty," Reliability Engineering and System Safety, Elsevier, vol. 216(C).
    8. Yang, Yiming & Peng, Jianxin & Cai, C.S. & Zhou, Yadong & Wang, Lei & Zhang, Jianren, 2022. "Time-dependent reliability assessment of aging structures considering stochastic resistance degradation process," Reliability Engineering and System Safety, Elsevier, vol. 217(C).
    9. Byun, Ji-Eun & Zwirglmaier, Kilian & Straub, Daniel & Song, Junho, 2019. "Matrix-based Bayesian Network for efficient memory storage and flexible inference," Reliability Engineering and System Safety, Elsevier, vol. 185(C), pages 533-545.
    10. Zhou, Daoqing & Sun, C.P. & Du, Yi-Mu & Guan, Xuefei, 2022. "Degradation and reliability of multi-function systems using the hazard rate matrix and Markovian approximation," Reliability Engineering and System Safety, Elsevier, vol. 218(PB).
    11. Wang, Tiao & Li, Chunhe & Zheng, Jian-jun & Hackl, Jürgen & Luan, Yao & Ishida, Tetsuya & Medepalli, Satya, 2023. "Consideration of coupling of crack development and corrosion in assessing the reliability of reinforced concrete beams subjected to bending," Reliability Engineering and System Safety, Elsevier, vol. 233(C).
    12. Bhuyan, Kasturi & Sharma, Hrishikesh, 2022. "Reliability analysis & performance-based code calibration for slabs/walls of protective structures subject to air blast loading," Reliability Engineering and System Safety, Elsevier, vol. 228(C).
    13. Bigaud, David & Ali, Osama, 2014. "Time-variant flexural reliability of RC beams with externally bonded CFRP under combined fatigue-corrosion actions," Reliability Engineering and System Safety, Elsevier, vol. 131(C), pages 257-270.
    14. Ramezani, Mahyar & Choe, Do-Eun & Heydarpour, Khashayar & Koo, Bonjun, 2023. "Uncertainty models for the structural design of floating offshore wind turbines: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 185(C).
    15. Du, Ao & Wang, Xiaowei & Xie, Yazhou & Dong, You, 2023. "Regional seismic risk and resilience assessment: Methodological development, applicability, and future research needs – An earthquake engineering perspective," Reliability Engineering and System Safety, Elsevier, vol. 233(C).
    16. Iannacone, Leandro & Sharma, Neetesh & Tabandeh, Armin & Gardoni, Paolo, 2022. "Modeling Time-varying Reliability and Resilience of Deteriorating Infrastructure," Reliability Engineering and System Safety, Elsevier, vol. 217(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:spr:nathaz:v:75:y:2015:i:1:p:581-611. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sonal Shukla or Springer Nature Abstracting and Indexing (email available below). General contact details of provider: http://www.springer.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.