IDEAS home Printed from https://ideas.repec.org/a/hin/complx/2739212.html
   My bibliography  Save this article

Analysis on the Time-Varying Fragility of Offshore Concrete Bridge

Author

Listed:
  • Yan Liang
  • Jia-lei Yan
  • Jun-lei Wang
  • Peng Zhang
  • Bao-jie He

Abstract

For offshore bridges, the most prominent problem in the whole life cycle is that it is in an earthquake prone zone and an offshore corrosion environment at the same time. A nonlinear dynamic analysis model is set up for an offshore multispan and continuous rigid frame bridge based on the OpenSEES platform. The fragility surface of the bridge pier, bearing, bridge platform, and system are established by selecting a reasonable damage constitutive model of the material durability and a damage index analysis that studies the damage of the bridge durability to time-varying seismic fragility of bridge components and the system of the whole life cycle in offshore environment. The results show that the durability damage will lead to a constant decline in seismic capacity of the pier and an increase of the seismic demand under earthquake action as well as the probability to reach the ultimate failure state; compared to high piers, a low pier is more vulnerable to the offshore corrosion environment; the seismic fragility of bridge platform is higher than that of simply bearing; and the influence of offshore corrosion on environment is relatively large. With the prolongation of service period, the effect of durability damage on the seismic fragility of bridge system cannot be ignored in the coastal environment and it is necessary to make a reasonable evaluation on the seismic fragility of bridge structure during the whole life period.

Suggested Citation

  • Yan Liang & Jia-lei Yan & Jun-lei Wang & Peng Zhang & Bao-jie He, 2019. "Analysis on the Time-Varying Fragility of Offshore Concrete Bridge," Complexity, Hindawi, vol. 2019, pages 1-22, January.
  • Handle: RePEc:hin:complx:2739212
    DOI: 10.1155/2019/2739212
    as

    Download full text from publisher

    File URL: http://downloads.hindawi.com/journals/8503/2019/2739212.pdf
    Download Restriction: no

    File URL: http://downloads.hindawi.com/journals/8503/2019/2739212.xml
    Download Restriction: no

    File URL: https://libkey.io/10.1155/2019/2739212?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. Choe, Do-Eun & Gardoni, Paolo & Rosowsky, David & Haukaas, Terje, 2008. "Probabilistic capacity models and seismic fragility estimates for RC columns subject to corrosion," Reliability Engineering and System Safety, Elsevier, vol. 93(3), pages 383-393.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Vishwanath, B Sharanbaswa & Banerjee, Swagata, 2023. "Considering uncertainty in corrosion process to estimate life-cycle seismic vulnerability and risk of aging bridge piers," Reliability Engineering and System Safety, Elsevier, vol. 232(C).
    2. Morshedi, Mohamad Ali & Kashani, Hamed, 2022. "Assessment of vulnerability reduction policies: Integration of economic and cognitive models of decision-making," Reliability Engineering and System Safety, Elsevier, vol. 217(C).
    3. Chien-Kuo Chiu & Fung-Chung Tu & Cheng-Yu Fan, 2015. "Risk assessment of environmental corrosion for reinforcing steel bars embedded in concrete in Taiwan," Natural Hazards: Journal of the International Society for the Prevention and Mitigation of Natural Hazards, Springer;International Society for the Prevention and Mitigation of Natural Hazards, vol. 75(1), pages 581-611, January.
    4. He, Jingjing & Huang, Min & Wang, Wei & Wang, Shaohua & Guan, Xuefei, 2021. "An asymptotic stochastic response surface approach to reliability assessment under multi-source heterogeneous uncertainties," Reliability Engineering and System Safety, Elsevier, vol. 215(C).
    5. Ghosh, Jayadipta & Sood, Piyush, 2016. "Consideration of time-evolving capacity distributions and improved degradation models for seismic fragility assessment of aging highway bridges," Reliability Engineering and System Safety, Elsevier, vol. 154(C), pages 197-218.
    6. Gangolu, Jaswanth & Kumar, Ajay & Bhuyan, Kasturi & Sharma, Hrishikesh, 2022. "Probabilistic demand models and performance-based fragility estimates for concrete protective structures subjected to missile impact," Reliability Engineering and System Safety, Elsevier, vol. 223(C).
    7. Zhao, Yan-Gang & Qin, Miao-Jun & Lu, Zhao-Hui & Zhang, Long-Wen, 2021. "Seismic fragility analysis of nuclear power plants considering structural parameter uncertainty," Reliability Engineering and System Safety, Elsevier, vol. 216(C).
    8. Yang, Yiming & Peng, Jianxin & Cai, C.S. & Zhou, Yadong & Wang, Lei & Zhang, Jianren, 2022. "Time-dependent reliability assessment of aging structures considering stochastic resistance degradation process," Reliability Engineering and System Safety, Elsevier, vol. 217(C).
    9. Byun, Ji-Eun & Zwirglmaier, Kilian & Straub, Daniel & Song, Junho, 2019. "Matrix-based Bayesian Network for efficient memory storage and flexible inference," Reliability Engineering and System Safety, Elsevier, vol. 185(C), pages 533-545.
    10. Zhou, Daoqing & Sun, C.P. & Du, Yi-Mu & Guan, Xuefei, 2022. "Degradation and reliability of multi-function systems using the hazard rate matrix and Markovian approximation," Reliability Engineering and System Safety, Elsevier, vol. 218(PB).
    11. Wang, Tiao & Li, Chunhe & Zheng, Jian-jun & Hackl, Jürgen & Luan, Yao & Ishida, Tetsuya & Medepalli, Satya, 2023. "Consideration of coupling of crack development and corrosion in assessing the reliability of reinforced concrete beams subjected to bending," Reliability Engineering and System Safety, Elsevier, vol. 233(C).
    12. Bhuyan, Kasturi & Sharma, Hrishikesh, 2022. "Reliability analysis & performance-based code calibration for slabs/walls of protective structures subject to air blast loading," Reliability Engineering and System Safety, Elsevier, vol. 228(C).
    13. Bigaud, David & Ali, Osama, 2014. "Time-variant flexural reliability of RC beams with externally bonded CFRP under combined fatigue-corrosion actions," Reliability Engineering and System Safety, Elsevier, vol. 131(C), pages 257-270.
    14. Ramezani, Mahyar & Choe, Do-Eun & Heydarpour, Khashayar & Koo, Bonjun, 2023. "Uncertainty models for the structural design of floating offshore wind turbines: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 185(C).
    15. Du, Ao & Wang, Xiaowei & Xie, Yazhou & Dong, You, 2023. "Regional seismic risk and resilience assessment: Methodological development, applicability, and future research needs – An earthquake engineering perspective," Reliability Engineering and System Safety, Elsevier, vol. 233(C).
    16. Iannacone, Leandro & Sharma, Neetesh & Tabandeh, Armin & Gardoni, Paolo, 2022. "Modeling Time-varying Reliability and Resilience of Deteriorating Infrastructure," Reliability Engineering and System Safety, Elsevier, vol. 217(C).

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:hin:complx:2739212. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Mohamed Abdelhakeem (email available below). General contact details of provider: https://www.hindawi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.