IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v17y2024i9p2185-d1387923.html
   My bibliography  Save this article

Research on Thermal Adaptability of Flexible Operation in Different Types of Coal-Fired Power Units

Author

Listed:
  • Haijiao Wei

    (China North Vehicle Research Institute, Beijing 100072, China)

  • Yuanwei Lu

    (Key Laboratory of Enhanced Heat Transfer and Energy Conservation, Faculty of Mechanical and Energy Engineering, Beijing University of Technology, Beijing 100124, China)

  • Yanchun Yang

    (School of Energy and Power Engineering, Inner Mongolia University of Technology, Hohhot 010051, China)

  • Yuting Wu

    (Key Laboratory of Enhanced Heat Transfer and Energy Conservation, Faculty of Mechanical and Energy Engineering, Beijing University of Technology, Beijing 100124, China)

  • Kaifeng Zheng

    (China North Vehicle Research Institute, Beijing 100072, China)

  • Liang Li

    (Inner Mongolia Daihai Power Generation Co., Ltd., Liangcheng County, Ulanqab 013750, China)

Abstract

The flexible mode of operation of coal-fired units can accommodate large-scale renewable power integration into the grid, providing more grid capacity. The flexibility transformation of coal-fired units in thermal power plants can be achieved through main steam extraction and reheated steam extraction. A 300 MW subcritical unit, 600 MW subcritical unit and 660 MW ultra-supercritical unit with six flexible operation modes were chosen as the research model to investigate the thermal adaptability for flexible operation. The results show that from the perspective of the source of steam extraction, the main steam extraction scheme is suitable for the flexible adjustment of peak load capacity, and the reheated extraction scheme is suitable for the flexible operation of low load and high thermal efficiency. Moreover, from the perspective of thermal performance adaptability, the 600 MW unit has a wider load regulation capacity than the 300 MW and 660 MW units, and is suitable as the peak shaving unit. This work can provide theoretical guidance for different types of coal-fired units in choosing flexible operation schemes.

Suggested Citation

  • Haijiao Wei & Yuanwei Lu & Yanchun Yang & Yuting Wu & Kaifeng Zheng & Liang Li, 2024. "Research on Thermal Adaptability of Flexible Operation in Different Types of Coal-Fired Power Units," Energies, MDPI, vol. 17(9), pages 1-19, May.
    • Handle: RePEc:gam:jeners:v:17:y:2024:i:9:p:2185-:d:1387923
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/17/9/2185/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/17/9/2185/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Zhao, Yongliang & Wang, Chaoyang & Liu, Ming & Chong, Daotong & Yan, Junjie, 2018. "Improving operational flexibility by regulating extraction steam of high-pressure heaters on a 660 MW supercritical coal-fired power plant: A dynamic simulation," Applied Energy, Elsevier, vol. 212(C), pages 1295-1309.
    2. Hou, Hui & Xu, Tao & Wu, Xixiu & Wang, Huan & Tang, Aihong & Chen, Yangyang, 2020. "Optimal capacity configuration of the wind-photovoltaic-storage hybrid power system based on gravity energy storage system," Applied Energy, Elsevier, vol. 271(C).
    3. Wang, Chaoyang & Liu, Ming & Li, Bingxin & Liu, Yiwen & Yan, Junjie, 2017. "Thermodynamic analysis on the transient cycling of coal-fired power plants: Simulation study of a 660 MW supercritical unit," Energy, Elsevier, vol. 122(C), pages 505-527.
    4. Ding, Zhixiong & Wu, Wei, 2021. "A hybrid compression-assisted absorption thermal battery with high energy storage density/efficiency and low charging temperature," Applied Energy, Elsevier, vol. 282(PA).
    5. Wang, Zeyu & Diao, Yanhua & Zhao, Yaohua & Chen, Chuanqi & Liang, Lin & Wang, Tengyue, 2020. "Thermal performance of integrated collector storage solar air heater with evacuated tube and lap joint-type flat micro-heat pipe arrays," Applied Energy, Elsevier, vol. 261(C).
    6. Ma, Tingshan & Li, Zhengkuan & Lv, Kai & Chang, Dongfeng & Hu, Wenshuai & Zou, Ying, 2024. "Design and performance analysis of deep peak shaving scheme for thermal power units based on high-temperature molten salt heat storage system," Energy, Elsevier, vol. 288(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Sun, Bo & Zhao, Yongliang & Zhang, Shunqi & Zhou, Jinyi & Liu, Jiping & Zhang, Pengwei & Yan, Junjie, 2025. "Thermodynamic performance analysis of steam power plants during deep peak shaving processes: Integrating a novel top turbine system in ultra-low loads," Energy, Elsevier, vol. 315(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Yan, Hui & Liu, Ming & Wang, Zhu & Zhang, Kezhen & Chong, Daotong & Yan, Junjie, 2023. "Flexibility enhancement of solar-aided coal-fired power plant under different direct normal irradiance conditions," Energy, Elsevier, vol. 262(PA).
    2. Zhang, Kezhen & Liu, Ming & Zhao, Yongliang & Wang, Chaoyang & Yan, Junjie, 2020. "Entropy generation versus transition time of heat exchanger during transient processes," Energy, Elsevier, vol. 200(C).
    3. Liu, Zefeng & Wang, Chaoyang & Fan, Jianlin & Liu, Ming & Xing, Yong & Yan, Junjie, 2024. "Enhancing the flexibility and stability of coal-fired power plants by optimizing control schemes of throttling high-pressure extraction steam," Energy, Elsevier, vol. 288(C).
    4. Wang, Chaoyang & Zhao, Yongliang & Liu, Ming & Qiao, Yongqiang & Chong, Daotong & Yan, Junjie, 2018. "Peak shaving operational optimization of supercritical coal-fired power plants by revising control strategy for water-fuel ratio," Applied Energy, Elsevier, vol. 216(C), pages 212-223.
    5. Zhang, Kezhen & Zhao, Yongliang & Liu, Ming & Gao, Lin & Fu, Yue & Yan, Junjie, 2021. "Flexibility enhancement versus thermal efficiency of coal-fired power units during the condensate throttling processes," Energy, Elsevier, vol. 218(C).
    6. Wang, Chaoyang & Liu, Ming & Zhao, Yongliang & Qiao, Yongqiang & Yan, Junjie, 2018. "Entropy generation analysis on a heat exchanger with different design and operation factors during transient processes," Energy, Elsevier, vol. 158(C), pages 330-342.
    7. Zhao, Yongliang & Liu, Ming & Wang, Chaoyang & Li, Xin & Chong, Daotong & Yan, Junjie, 2018. "Increasing operational flexibility of supercritical coal-fired power plants by regulating thermal system configuration during transient processes," Applied Energy, Elsevier, vol. 228(C), pages 2375-2386.
    8. Xie, Yan & Liu, Ji-zhen & Zeng, De-liang & Hu, Yong & Li, Rui-lian & Zhu, Yan-song, 2024. "A dynamic hybrid model of supercritical once-through boiler-turbine unit including recirculation mode and once-through mode," Energy, Elsevier, vol. 309(C).
    9. Chen, Chen & Zhao, Chenyu & Liu, Ming & Wang, Chaoyang & Yan, Junjie, 2024. "Enhancing the load cycling rate of subcritical coal-fired power plants: A novel control strategy based on data-driven feedwater active regulation," Energy, Elsevier, vol. 312(C).
    10. Ioannis Avagianos & Dimitrios Rakopoulos & Sotirios Karellas & Emmanouil Kakaras, 2020. "Review of Process Modeling of Solid-Fuel Thermal Power Plants for Flexible and Off-Design Operation," Energies, MDPI, vol. 13(24), pages 1-41, December.
    11. Wang, Chaoyang & Qiao, Yongqiang & Liu, Ming & Zhao, Yongliang & Yan, Junjie, 2020. "Enhancing peak shaving capability by optimizing reheat-steam temperature control of a double-reheat boiler," Applied Energy, Elsevier, vol. 260(C).
    12. Wang, Yanhong & Cao, Lihua & Hu, Pengfei & Li, Bo & Li, Yong, 2019. "Model establishment and performance evaluation of a modified regenerative system for a 660 MW supercritical unit running at the IPT-setting mode," Energy, Elsevier, vol. 179(C), pages 890-915.
    13. Wang, Zhu & Liu, Ming & Yan, Hui & Yan, Junjie, 2022. "Optimization on coordinate control strategy assisted by high-pressure extraction steam throttling to achieve flexible and efficient operation of thermal power plants," Energy, Elsevier, vol. 244(PA).
    14. Zhao, Yongliang & Liu, Ming & Wang, Chaoyang & Wang, Zhu & Chong, Daotong & Yan, Junjie, 2019. "Exergy analysis of the regulating measures of operational flexibility in supercritical coal-fired power plants during transient processes," Applied Energy, Elsevier, vol. 253(C), pages 1-1.
    15. Wang, Zhu & Liu, Ming & Yan, Junjie, 2021. "Flexibility and efficiency co-enhancement of thermal power plant by control strategy improvement considering time varying and detailed boiler heat storage characteristics," Energy, Elsevier, vol. 232(C).
    16. Wang, Chaoyang & Liu, Ming & Zhao, Yongliang & Wang, Zhu & Yan, Junjie, 2018. "Thermodynamics analysis on a heat exchanger unit during the transient processes based on the second law," Energy, Elsevier, vol. 165(PB), pages 622-633.
    17. Liu, Kairui & Wang, Chao & Wang, Limin & Liu, Bin & Ye, Maojing & Guo, Yalong & Che, Defu, 2023. "Dynamic performance analysis and control strategy optimization for supercritical coal-fired boiler: A dynamic simulation," Energy, Elsevier, vol. 282(C).
    18. Wang, Jiangjiang & Deng, Hongda & Qi, Xiaoling, 2022. "Cost-based site and capacity optimization of multi-energy storage system in the regional integrated energy networks," Energy, Elsevier, vol. 261(PA).
    19. Yin, Linfei & Xie, Jiaxing, 2022. "Multi-feature-scale fusion temporal convolution networks for metal temperature forecasting of ultra-supercritical coal-fired power plant reheater tubes," Energy, Elsevier, vol. 238(PA).
    20. Ding, Zhixiong & Wu, Wei, 2024. "Simulation of a multi-level absorption thermal battery with variable solution flow rate for adjustable cooling capacity," Energy, Elsevier, vol. 301(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:17:y:2024:i:9:p:2185-:d:1387923. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.