IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v15y2022i9p3243-d804848.html
   My bibliography  Save this article

A Novel Bio-Architectural Temporary Housing Designed for the Mediterranean Area: Theoretical and Experimental Analysis

Author

Listed:
  • Roberto Bruno

    (Mechanical, Energy and Management Engineering Department, University of Calabria (Italy), 87036 Rende, Italy)

  • Piero Bevilacqua

    (Mechanical, Energy and Management Engineering Department, University of Calabria (Italy), 87036 Rende, Italy)

  • Antonino Rollo

    (Mechanical, Energy and Management Engineering Department, University of Calabria (Italy), 87036 Rende, Italy)

  • Francesco Barreca

    (Department of Agriculture, Mediterranean University of Reggio Calabria (Italy), 89124 Reggio Calabria, Italy)

  • Natale Arcuri

    (Mechanical, Energy and Management Engineering Department, University of Calabria (Italy), 87036 Rende, Italy)

Abstract

Energy performances of an innovative Temporary Housing Unit (THU), made of natural materials and developed for the Mediterranean area, were determined. Cork panels limit winter transmission losses, whereas bio-PCMs were applied to reduce cooling needs properly. Assuming a split system for air-conditioning purposes, simulations in EnergyPlus allowed for identifying the optimal configuration that minimizes the annual electric demand. Bio-PCM melting temperatures, locations inside the external walls and the PCM quantities were varied. An ideal melting temperature of 23 °C was identified, whereas a double PCM layer uniformly distributed in the external walls is recommended, mainly for the limitation of the cooling demands. Negligible differences in electric requirements have been observed between the continuous and the scheduled functioning of the split system. A PV generator installed on the available roof surface allows for covering the electric demands satisfactorily. Experimental tests carried out in a climatic chamber have allowed for determining the dynamic thermal performance of the optimized panel by considering variable external conditions. Results show how the considered PCM in summer is able to delay and attenuate the indoor air temperature peaks considerably, confirming the crucial role of bio-PCM to reduce cooling demands, in line with the simulation results.

Suggested Citation

  • Roberto Bruno & Piero Bevilacqua & Antonino Rollo & Francesco Barreca & Natale Arcuri, 2022. "A Novel Bio-Architectural Temporary Housing Designed for the Mediterranean Area: Theoretical and Experimental Analysis," Energies, MDPI, vol. 15(9), pages 1-25, April.
    • Handle: RePEc:gam:jeners:v:15:y:2022:i:9:p:3243-:d:804848
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/15/9/3243/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/15/9/3243/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Evola, G. & Marletta, L., 2015. "The Solar Response Factor to calculate the cooling load induced by solar gains," Applied Energy, Elsevier, vol. 160(C), pages 431-441.
    2. Alexander Fekete & Lisa Bross & Steffen Krause & Florian Neisser & Katerina Tzavella, 2021. "Bridging Gaps in Minimum Humanitarian Standards and Shelter Planning by Critical Infrastructures," Sustainability, MDPI, vol. 13(2), pages 1-17, January.
    3. Khaireldin Faraj & Mahmoud Khaled & Jalal Faraj & Farouk Hachem & Cathy Castelain, 2022. "A Summary Review on Experimental Studies for PCM Building Applications: Towards Advanced Modular Prototype," Energies, MDPI, vol. 15(4), pages 1-43, February.
    4. Anna Bać & Magdalena Nemś & Artur Nemś & Jacek Kasperski, 2019. "Sustainable Integration of a Solar Heating System into a Single-Family House in the Climate of Central Europe—A Case Study," Sustainability, MDPI, vol. 11(15), pages 1-20, August.
    5. Piero Bevilacqua & Stefania Perrella & Daniela Cirone & Roberto Bruno & Natale Arcuri, 2021. "Efficiency Improvement of Photovoltaic Modules via Back Surface Cooling," Energies, MDPI, vol. 14(4), pages 1-18, February.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Jesus Fernando Hinojosa & Saul Fernando Moreno & Victor Manuel Maytorena, 2023. "Low-Temperature Applications of Phase Change Materials for Energy Storage: A Descriptive Review," Energies, MDPI, vol. 16(7), pages 1-39, March.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Bruno, Roberto & Bevilacqua, Piero, 2022. "Heat and mass transfer for the U-value assessment of opaque walls in the Mediterranean climate: Energy implications," Energy, Elsevier, vol. 261(PA).
    2. Beata Pytlik & Daniel Smykowski & Piotr Szulc, 2022. "The Impact of Baffle Geometry in the PCM Heat Storage Unit on the Charging Process with High and Low Water Streams," Energies, MDPI, vol. 15(24), pages 1-17, December.
    3. Alessia D’Andrea & Patrizia Grifoni & Fernando Ferri, 2022. "Discussing the Role of ICT in Sustainable Disaster Management," Sustainability, MDPI, vol. 14(12), pages 1-15, June.
    4. Zhang, Xiang & Rasmussen, Christoffer & Saelens, Dirk & Roels, Staf, 2022. "Time-dependent solar aperture estimation of a building: Comparing grey-box and white-box approaches," Renewable and Sustainable Energy Reviews, Elsevier, vol. 161(C).
    5. Daniela Cirone & Roberto Bruno & Piero Bevilacqua & Stefania Perrella & Natale Arcuri, 2022. "Techno-Economic Analysis of an Energy Community Based on PV and Electric Storage Systems in a Small Mountain Locality of South Italy: A Case Study," Sustainability, MDPI, vol. 14(21), pages 1-14, October.
    6. Jacek Kasperski & Anna Bać & Oluwafunmilola Oladipo, 2023. "A Simulation of a Sustainable Plus-Energy House in Poland Equipped with a Photovoltaic Powered Seasonal Thermal Storage System," Sustainability, MDPI, vol. 15(4), pages 1-19, February.
    7. Sandra Cunha & Antonella Sarcinella & José Aguiar & Mariaenrica Frigione, 2023. "Perspective on the Development of Energy Storage Technology Using Phase Change Materials in the Construction Industry: A Review," Energies, MDPI, vol. 16(12), pages 1-32, June.
    8. Bevilacqua, Piero & Bruno, Roberto & Szyszka, Jerzy & Cirone, Daniela & Rollo, Antonino, 2022. "Summer and winter performance of an innovative concept of Trombe wall for residential buildings," Energy, Elsevier, vol. 258(C).
    9. Álvaro Rodríguez-Martinez & Carlos Rodríguez-Monroy, 2021. "Economic Analysis and Modelling of Rooftop Photovoltaic Systems in Spain for Industrial Self-Consumption," Energies, MDPI, vol. 14(21), pages 1-32, November.
    10. Bevilacqua, Piero & Bruno, Roberto & Rollo, Antonino & Ferraro, Vittorio, 2022. "A novel thermal model for PV panels with back surface spray cooling," Energy, Elsevier, vol. 255(C).
    11. Ghosh, Aritra & Norton, Brian & Duffy, Aidan, 2016. "Behaviour of a SPD switchable glazing in an outdoor test cell with heat removal under varying weather conditions," Applied Energy, Elsevier, vol. 180(C), pages 695-706.
    12. Rasooli, Arash & Itard, Laure, 2019. "In-situ rapid determination of walls’ thermal conductivity, volumetric heat capacity, and thermal resistance, using response factors," Applied Energy, Elsevier, vol. 253(C), pages 1-1.
    13. Hai Wang & Mengjie Song & Haoteng Li, 2022. "Optical Performance Comparison of Different Shapes of Cavity Receiver in the Fixed Line-Focus Solar Concentrating System," Sustainability, MDPI, vol. 14(3), pages 1-25, January.
    14. Nicoletti, Francesco & Cucumo, Mario Antonio & Arcuri, Natale, 2023. "Building-integrated photovoltaics (BIPV): A mathematical approach to evaluate the electrical production of solar PV blinds," Energy, Elsevier, vol. 263(PD).
    15. Qi Yang & Yanpei Huang & Zitian Niu & Yuandong Guo & Qi Wu & Jianyin Miao, 2022. "Experimental Investigation on the Heat Transfer Characteristics of Multi-Point Heating Microchannels for Simulating Solar Cell Cooling," Energies, MDPI, vol. 15(15), pages 1-14, July.
    16. Lauma Balode & Kristiāna Dolge & Dagnija Blumberga, 2023. "Sector-Specific Pathways to Sustainability: Unravelling the Most Promising Renewable Energy Options," Sustainability, MDPI, vol. 15(16), pages 1-24, August.
    17. Piero Bevilacqua & Stefania Perrella & Daniela Cirone & Roberto Bruno & Natale Arcuri, 2021. "Efficiency Improvement of Photovoltaic Modules via Back Surface Cooling," Energies, MDPI, vol. 14(4), pages 1-18, February.
    18. Stefania Perrella & Roberto Bruno & Piero Bevilacqua & Daniela Cirone & Natale Arcuri, 2023. "Energy Evaluations of a New Plant Configuration for Solar-Assisted Heat Pumps in Cold Climates," Sustainability, MDPI, vol. 15(2), pages 1-17, January.
    19. Gabriella-Stefánia Szabó & Róbert Szabó & Loránd Szabó, 2022. "A Review of the Mitigating Methods against the Energy Conversion Decrease in Solar Panels," Energies, MDPI, vol. 15(18), pages 1-21, September.
    20. Francesco Nicoletti & Mario Antonio Cucumo & Vittorio Ferraro & Dimitrios Kaliakatsos & Albino Gigliotti, 2022. "A Thermal Model to Estimate PV Electrical Power and Temperature Profile along Panel Thickness," Energies, MDPI, vol. 15(20), pages 1-17, October.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:15:y:2022:i:9:p:3243-:d:804848. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.