IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v14y2021i5p1287-d506391.html
   My bibliography  Save this article

Validated Analytical Modeling of Diesel Engines Intake Manifold with a Flexible Crankshaft

Author

Listed:
  • Salah A. M. Elmoselhy

    (CFisUC, Department of Physics, University of Coimbra, P-3004 516 Coimbra, Portugal)

  • Waleed F. Faris

    (Department of Mechanical Engineering, International Islamic University Malaysia, Gombak, Kuala Lumpur 53100, Malaysia)

  • Hesham A. Rakha

    (Virginia Tech Transportation Institute, Virginia Polytechnic Institute and State University, 3500 Transportation Research Plaza, Blacksburg, VA 24061, USA)

Abstract

The flexibility of a crankshaft exhibits significant nonlinearities in the analysis of diesel engines performance, particularly at rotational speeds of around 2000 rpm. Given the explainable mathematical trends of the analytical model and the lack of available analytical modeling of the diesel engines intake manifold with a flexible crankshaft, the present study develops and validates such a model. In the present paper, the mass flow rate of air that goes from intake manifold into all the cylinders of the engine with a flexible crankshaft has been analytically modeled. The analytical models of the mass flow rate of air and gas speed dynamics have been validated using case studies and the ORNL and EPA Freeway standard drive cycles showing a relative error of 7.5% and 11%, respectively. Such values of relative error are on average less than those of widely recognized models in this field, such as the GT-Power and the CMEM, respectively. A simplified version for control applications of the developed models has been developed based on a sensitivity analysis. It has been found that the flexibility of a crankshaft decreases the mass flow rate of air that goes into cylinders, resulting in an unfavorable higher rate of exhaust emissions like CO. It has also been found that the pressure of the gas inside the cylinder during the intake stroke has four elements: a driving element (intake manifold pressure) and draining elements (vacuum pressure and flow losses and inertial effect of rotating mass). The element of the least effect amongst these four elements is the vacuum pressure that results from the piston’s inertia and acceleration. The element of the largest effect is the pressure drop that takes place in the cylinder because of the air/gas flow losses. These developed models are explainable and widely valid so that they can help in better analyzing the performance of diesel engines.

Suggested Citation

  • Salah A. M. Elmoselhy & Waleed F. Faris & Hesham A. Rakha, 2021. "Validated Analytical Modeling of Diesel Engines Intake Manifold with a Flexible Crankshaft," Energies, MDPI, vol. 14(5), pages 1-20, February.
    • Handle: RePEc:gam:jeners:v:14:y:2021:i:5:p:1287-:d:506391
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/14/5/1287/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/14/5/1287/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Al-Hinti, I. & Samhouri, M. & Al-Ghandoor, A. & Sakhrieh, A., 2009. "The effect of boost pressure on the performance characteristics of a diesel engine: A neuro-fuzzy approach," Applied Energy, Elsevier, vol. 86(1), pages 113-121, January.
    2. Vladimir Bondar & Sergei Aliukov & Andrey Malozemov & Arkaprava Das, 2020. "Mathematical Model of Thermodynamic Processes in the Intake Manifold of a Diesel Engine with Fuel and Water Injection," Energies, MDPI, vol. 13(17), pages 1-18, August.
    3. Natascia Palazzo & Lars Zigan & Franz J. T. Huber & Stefan Will, 2020. "Impact of Oxygenated Additives on Soot Properties during Diesel Combustion," Energies, MDPI, vol. 14(1), pages 1-21, December.
    4. José R. Serrano & Francisco J. Arnau & Jaime Martín & Ángel Auñón, 2020. "Development of a Variable Valve Actuation Control to Improve Diesel Oxidation Catalyst Efficiency and Emissions in a Light Duty Diesel Engine," Energies, MDPI, vol. 13(17), pages 1-26, September.
    5. Dominik Wojtkowiak & Krzysztof Talaśka & Dominik Wilczyński & Jan Górecki & Krzysztof Wałęsa, 2021. "Determining the Power Consumption of the Automatic Device for Belt Perforation Based on the Dynamic Model," Energies, MDPI, vol. 14(2), pages 1-15, January.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Salah A. M. Elmoselhy & Waleed F. Faris & Hesham A. Rakha, 2022. "Validated Analytical Modeling of Eccentricity and Dynamic Displacement in Diesel Engines with Flexible Crankshaft," Energies, MDPI, vol. 15(16), pages 1-21, August.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Han, Sangwook & Kim, Jaeheun & Bae, Choongsik, 2014. "Effect of air–fuel mixing quality on characteristics of conventional and low temperature diesel combustion," Applied Energy, Elsevier, vol. 119(C), pages 454-466.
    2. Ma, Zetai & Xie, Wenping & Xiang, Hanchun & Zhang, Kun & Yang, Mingyang & Deng, Kangyao, 2023. "Thermodynamic analysis of power recovery of marine diesel engine under high exhaust backpressure by additional electrically driven compressor," Energy, Elsevier, vol. 266(C).
    3. Yang, L. & Entchev, E., 2014. "Performance prediction of a hybrid microgeneration system using Adaptive Neuro-Fuzzy Inference System (ANFIS) technique," Applied Energy, Elsevier, vol. 134(C), pages 197-203.
    4. Olmeda, Pablo & Martín, Jaime & Novella, Ricardo & Carreño, Ricardo, 2015. "An adapted heat transfer model for engines with tumble motion," Applied Energy, Elsevier, vol. 158(C), pages 190-202.
    5. Meng Xia & Fujun Zhang, 2020. "Application of Multi-Parameter Fuzzy Optimization to Enhance Performance of a Regulated Two-Stage Turbocharged Diesel Engine Operating at High Altitude," Energies, MDPI, vol. 13(17), pages 1-12, August.
    6. Mavropoulos, G.C., 2011. "Experimental study of the interactions between long and short-term unsteady heat transfer responses on the in-cylinder and exhaust manifold diesel engine surfaces," Applied Energy, Elsevier, vol. 88(3), pages 867-881, March.
    7. Saravanan, S. & Kaliyanasunder, R. & Rajesh Kumar, B. & Lakshmi Narayana Rao, G., 2020. "Effect of design parameters on performance and emissions of a CI engine operated with diesel-biodiesel- higher alcohol blends," Renewable Energy, Elsevier, vol. 148(C), pages 425-436.
    8. Dey, Suman & Reang, Narath Moni & Majumder, Arindam & Deb, Madhujit & Das, Pankaj Kumar, 2020. "A hybrid ANN-Fuzzy approach for optimization of engine operating parameters of a CI engine fueled with diesel-palm biodiesel-ethanol blend," Energy, Elsevier, vol. 202(C).
    9. Mariani, F. & Grimaldi, C.N. & Battistoni, M., 2014. "Diesel engine NOx emissions control: An advanced method for the O2 evaluation in the intake flow," Applied Energy, Elsevier, vol. 113(C), pages 576-588.
    10. Naoya Shigeta & Seyed Ehsan Hosseini, 2020. "Sustainable Development of the Automobile Industry in the United States, Europe, and Japan with Special Focus on the Vehicles’ Power Sources," Energies, MDPI, vol. 14(1), pages 1-32, December.
    11. Hasan Ustun Basaran, 2023. "Enhanced Exhaust after-Treatment Warmup in a Heavy-Duty Diesel Engine System via Miller Cycle and Delayed Exhaust Valve Opening," Energies, MDPI, vol. 16(12), pages 1-25, June.
    12. Payri, Francisco & Olmeda, Pablo & Arnau, Francisco J. & Dombrovsky, Artem & Smith, Les, 2014. "External heat losses in small turbochargers: Model and experiments," Energy, Elsevier, vol. 71(C), pages 534-546.
    13. Payri, F. & Olmeda, P. & Martín, J. & García, A., 2011. "A complete 0D thermodynamic predictive model for direct injection diesel engines," Applied Energy, Elsevier, vol. 88(12), pages 4632-4641.
    14. Roy, Sumit & Ghosh, Ashmita & Das, Ajoy Kumar & Banerjee, Rahul, 2015. "Development and validation of a GEP model to predict the performance and exhaust emission parameters of a CRDI assisted single cylinder diesel engine coupled with EGR," Applied Energy, Elsevier, vol. 140(C), pages 52-64.
    15. Tauzia, Xavier & Maiboom, Alain, 2013. "Experimental study of an automotive Diesel engine efficiency when running under stoichiometric conditions," Applied Energy, Elsevier, vol. 105(C), pages 116-124.
    16. Monika Andrych-Zalewska & Zdzisław Chłopek & Jerzy Merkisz & Jacek Pielecha, 2020. "Assessment of the Internal Catalyst Efficiency in a Diesel Engine of a Vehicle under the Conditions Simulating Real Driving," Energies, MDPI, vol. 13(24), pages 1-13, December.
    17. Abbaszadehmosayebi, G. & Ganippa, Lionel, 2014. "Determination of specific heat ratio and error analysis for engine heat release calculations," Applied Energy, Elsevier, vol. 122(C), pages 143-150.
    18. Hountalas, D.T. & Papagiannakis, R.G. & Zovanos, G. & Antonopoulos, A., 2014. "Comparative evaluation of various methodologies to account for the effect of load variation during cylinder pressure measurement of large scale two-stroke diesel engines," Applied Energy, Elsevier, vol. 113(C), pages 1027-1042.
    19. Togun, Necla & Baysec, Sedat, 2010. "Genetic programming approach to predict torque and brake specific fuel consumption of a gasoline engine," Applied Energy, Elsevier, vol. 87(11), pages 3401-3408, November.
    20. Avola, Calogero & Copeland, Colin D. & Burke, Richard D. & Brace, Chris J., 2017. "Effect of inter-stage phenomena on the performance prediction of two-stage turbocharging systems," Energy, Elsevier, vol. 134(C), pages 743-756.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:14:y:2021:i:5:p:1287-:d:506391. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.