IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v12y2019i3p372-d200612.html
   My bibliography  Save this article

Mechanisms and Influence of Casing Shear Deformation near the Casing Shoe, Based on MFC Surveys during Multistage Fracturing in Shale Gas Wells in Canada

Author

Listed:
  • Yan Xi

    (College of Petroleum Engineering, China University of Petroleum-Beijing, Beijing 102249, China)

  • Jun Li

    (College of Petroleum Engineering, China University of Petroleum-Beijing, Beijing 102249, China)

  • Gonghui Liu

    (College of Petroleum Engineering, China University of Petroleum-Beijing, Beijing 102249, China
    College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology, Beijing 100022, China)

  • Jianping Li

    (CNPC Logging Co., LTD, Xi’an 710000, China)

  • Jiwei Jiang

    (College of Petroleum Engineering, China University of Petroleum-Beijing, Beijing 102249, China)

Abstract

Casing shear deformation has become a serious problem in the development of shale gas fields, which is believed to be related to fault slipping caused by multistage fracturing, and the evaluation of the reduction of a casing’s inner diameter is key. Although many fault slipping models have been published, most of them have not taken the fluid-solid-heat coupling effect into account, and none of the models could be used to calculate the reduction of a casing’s inner diameter. In this paper, a new 3D finite element model was developed to simulate the progress of fault slipping, taking the fluid-solid-heat coupling effect during fracturing into account. For the purpose of increasing calculation accuracy, the elastoplastic constitutive relations of materials were considered, and the solid-shell elements technique was used. The reduction of the casing’s inner diameter along the axis was calculated and the calculation results were compared with the measurement results of multi-finger caliper (MFC) surveys. A sensitivity analysis was conducted, and the influences of slip distance, casing internal pressure, thickness of production and intermediate casing, and the mechanical parameters of cement sheath on the reduction of a casing’s inner diameter in the deformed segment were analyzed. The numerical analysis results showed that decreasing the slip distance, maintaining high pressure, decreasing the Poisson ratio of cement sheath, and increasing casing thickness were beneficial to protect the integrity of the casing. The numerical simulation results were verified by comparison to the shape of MFC measurement results, and had an accuracy up to 90.17%. Results from this study are expected to provide a better understanding of casing shear deformation, and a prediction method of a casing’s inner diameter after fault slipping in multistage fracturing wells.

Suggested Citation

  • Yan Xi & Jun Li & Gonghui Liu & Jianping Li & Jiwei Jiang, 2019. "Mechanisms and Influence of Casing Shear Deformation near the Casing Shoe, Based on MFC Surveys during Multistage Fracturing in Shale Gas Wells in Canada," Energies, MDPI, vol. 12(3), pages 1-22, January.
    • Handle: RePEc:gam:jeners:v:12:y:2019:i:3:p:372-:d:200612
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/12/3/372/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/12/3/372/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Honghua Tao & Liehui Zhang & Qiguo Liu & Qi Deng & Man Luo & Yulong Zhao, 2018. "An Analytical Flow Model for Heterogeneous Multi-Fractured Systems in Shale Gas Reservoirs," Energies, MDPI, vol. 11(12), pages 1-19, December.
    2. Fei Wang & Baoman Li & Yichi Zhang & Shicheng Zhang, 2017. "Coupled Thermo-Hydro-Mechanical-Chemical Modeling of Water Leak-Off Process during Hydraulic Fracturing in Shale Gas Reservoirs," Energies, MDPI, vol. 10(12), pages 1-17, November.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Qiao Deng & Hui Zhang & Jun Li & Xuejun Hou & Binxing Zhao, 2019. "Numerical Investigation of Downhole Perforation Pressure for a Deepwater Well," Energies, MDPI, vol. 12(19), pages 1-21, October.
    2. Salaheldin Elkatatny, 2019. "Development of a Homogenous Cement Slurry Using Synthetic Modified Phyllosilicate while Cementing HPHT Wells," Sustainability, MDPI, vol. 11(7), pages 1-14, March.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Wanniarachchige Gnamani Pabasara Kumari & Pathegama Gamage Ranjith, 2022. "Experimental and Numerical Investigation of the Flow Behaviour of Fractured Granite under Extreme Temperature and Pressure Conditions," Sustainability, MDPI, vol. 14(14), pages 1-19, July.
    2. Muhammad Shahzad Kamal & Marwan Mohammed & Mohamed Mahmoud & Salaheldin Elkatatny, 2018. "Development of Chelating Agent-Based Polymeric Gel System for Hydraulic Fracturing," Energies, MDPI, vol. 11(7), pages 1-15, June.
    3. Andrzej Rogala & Karolina Kucharska & Jan Hupka, 2019. "Shales Leaching Modelling for Prediction of Flowback Fluid Composition," Energies, MDPI, vol. 12(7), pages 1-21, April.
    4. Jianchao Cai & Zhien Zhang & Qinjun Kang & Harpreet Singh, 2019. "Recent Advances in Flow and Transport Properties of Unconventional Reservoirs," Energies, MDPI, vol. 12(10), pages 1-5, May.
    5. Zhang, Shuo & Song, Shengyuan & Zhang, Wen & Zhao, Jinmin & Cao, Dongfang & Ma, Wenliang & Chen, Zijian & Hu, Ying, 2023. "Research on the inherent mechanism of rock mass deformation of oil shale in-situ mining under the condition of thermal-fluid-solid coupling," Energy, Elsevier, vol. 280(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:12:y:2019:i:3:p:372-:d:200612. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.