IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v12y2019i17p3307-d261483.html
   My bibliography  Save this article

Analysis of Thermodynamic Models for Simulation and Optimisation of Organic Rankine Cycles

Author

Listed:
  • Goran Durakovic

    (SINTEF Energy Research, Kolbjørn Hejes vei 1B, 7034 Trondheim, Norway)

  • Geir Skaugen

    (SINTEF Energy Research, Kolbjørn Hejes vei 1B, 7034 Trondheim, Norway)

Abstract

Equations of state (EOSs) form the base of every thermodynamic model used in the design of industrial processes, but little work has been done to evaluate these in the context of such models. This work evaluates 13 EOSs for their accuracy, computational time and robustness when used in an in-house optimisation program that finds the maximum power output of an organic Rankine cycle. The EOSs represent popular choices in the industry, such as the simple cubic EOSs, and more complex EOSs such as the ones based on corresponding state principles (CSP). These results were compared with results from using the Groupe Européen de Recherches Gazières (GERG) EOS, whose error is within experimental uncertainty. It appears that the corresponding state EOSs find a solution to the optimisation problem notably faster than GERG without significant loss of accuracy. A corresponding state method which used the Peng–Robinson EOS to calculate the shape factors and a highly accurate EOS for propane as the reference EOS, was shown to have a total deviation of just 0.6% as compared to GERG while also being 10 times as fast. The CSP implementation was also more robust, being able to converge successfully more often.

Suggested Citation

  • Goran Durakovic & Geir Skaugen, 2019. "Analysis of Thermodynamic Models for Simulation and Optimisation of Organic Rankine Cycles," Energies, MDPI, vol. 12(17), pages 1-12, August.
  • Handle: RePEc:gam:jeners:v:12:y:2019:i:17:p:3307-:d:261483
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/12/17/3307/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/12/17/3307/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Frutiger, Jérôme & Andreasen, Jesper & Liu, Wei & Spliethoff, Hartmut & Haglind, Fredrik & Abildskov, Jens & Sin, Gürkan, 2016. "Working fluid selection for organic Rankine cycles – Impact of uncertainty of fluid properties," Energy, Elsevier, vol. 109(C), pages 987-997.
    2. Li, H. & Yan, J., 2009. "Impacts of equations of state (EOS) and impurities on the volume calculation of CO2 mixtures in the applications of CO2 capture and storage (CCS) processes," Applied Energy, Elsevier, vol. 86(12), pages 2760-2770, December.
    3. Li, H. & Yan, J., 2009. "Evaluating cubic equations of state for calculation of vapor-liquid equilibrium of CO2 and CO2-mixtures for CO2 capture and storage processes," Applied Energy, Elsevier, vol. 86(6), pages 826-836, June.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Michel Feidt & Monica Costea & Renaud Feidt & Quentin Danel & Christelle Périlhon, 2020. "New Criteria to Characterize the Waste Heat Recovery," Energies, MDPI, vol. 13(4), pages 1-15, February.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zhang, Minkai & Guo, Yincheng, 2013. "Rate based modeling of absorption and regeneration for CO2 capture by aqueous ammonia solution," Applied Energy, Elsevier, vol. 111(C), pages 142-152.
    2. Luo, Feng & Xu, Rui-Na & Jiang, Pei-Xue, 2013. "Numerical investigation of the influence of vertical permeability heterogeneity in stratified formation and of injection/production well perforation placement on CO2 geological storage with enhanced C," Applied Energy, Elsevier, vol. 102(C), pages 1314-1323.
    3. Chen, Wei-Hsin & Tsai, Ming-Hang & Hung, Chen-I, 2013. "Numerical prediction of CO2 capture process by a single droplet in alkaline spray," Applied Energy, Elsevier, vol. 109(C), pages 125-134.
    4. Chen, Wei-Hsin & Hou, Yu-Lin & Hung, Chen-I, 2011. "A theoretical analysis of the capture of greenhouse gases by single water droplet at atmospheric and elevated pressures," Applied Energy, Elsevier, vol. 88(12), pages 5120-5130.
    5. Luis Míguez, José & Porteiro, Jacobo & Pérez-Orozco, Raquel & Patiño, David & Rodríguez, Sandra, 2018. "Evolution of CO2 capture technology between 2007 and 2017 through the study of patent activity," Applied Energy, Elsevier, vol. 211(C), pages 1282-1296.
    6. Jiang, Xi, 2011. "A review of physical modelling and numerical simulation of long-term geological storage of CO2," Applied Energy, Elsevier, vol. 88(11), pages 3557-3566.
    7. Yin, Chungen & Yan, Jinyue, 2016. "Oxy-fuel combustion of pulverized fuels: Combustion fundamentals and modeling," Applied Energy, Elsevier, vol. 162(C), pages 742-762.
    8. Dall’Acqua, D. & Terenzi, A. & Leporini, M. & D’Alessandro, V. & Giacchetta, G. & Marchetti, B., 2017. "A new tool for modelling the decompression behaviour of CO2 with impurities using the Peng-Robinson equation of state," Applied Energy, Elsevier, vol. 206(C), pages 1432-1445.
    9. Cui, Guodong & Zhang, Liang & Ren, Bo & Enechukwu, Chioma & Liu, Yanmin & Ren, Shaoran, 2016. "Geothermal exploitation from depleted high temperature gas reservoirs via recycling supercritical CO2: Heat mining rate and salt precipitation effects," Applied Energy, Elsevier, vol. 183(C), pages 837-852.
    10. Hedin, Niklas & Andersson, Linnéa & Bergström, Lennart & Yan, Jinyue, 2013. "Adsorbents for the post-combustion capture of CO2 using rapid temperature swing or vacuum swing adsorption," Applied Energy, Elsevier, vol. 104(C), pages 418-433.
    11. Wenchao Yang & Shuhong Li & Xianliang Li & Yuanyuan Liang & Xiaosong Zhang, 2015. "Analysis of a New Liquefaction Combined with Desublimation System for CO 2 Separation Based on N 2 /CO 2 Phase Equilibrium," Energies, MDPI, vol. 8(9), pages 1-14, September.
    12. Li, Didi & Zhang, Hongcheng & Li, Yang & Xu, Wenbin & Jiang, Xi, 2018. "Effects of N2 and H2S binary impurities on CO2 geological storage in stratified formation – A sensitivity study," Applied Energy, Elsevier, vol. 229(C), pages 482-492.
    13. Chen, Wei-Hsin & Hou, Yu-Lin & Hung, Chen-I, 2012. "Influence of droplet mutual interaction on carbon dioxide capture process in sprays," Applied Energy, Elsevier, vol. 92(C), pages 185-193.
    14. Li, Hailong & Jakobsen, Jana P. & Wilhelmsen, Øivind & Yan, Jinyue, 2011. "PVTxy properties of CO2 mixtures relevant for CO2 capture, transport and storage: Review of available experimental data and theoretical models," Applied Energy, Elsevier, vol. 88(11), pages 3567-3579.
    15. Elshahomi, Alhoush & Lu, Cheng & Michal, Guillaume & Liu, Xiong & Godbole, Ajit & Venton, Philip, 2015. "Decompression wave speed in CO2 mixtures: CFD modelling with the GERG-2008 equation of state," Applied Energy, Elsevier, vol. 140(C), pages 20-32.
    16. Luo, Xiaobo & Wang, Meihong & Oko, Eni & Okezue, Chima, 2014. "Simulation-based techno-economic evaluation for optimal design of CO2 transport pipeline network," Applied Energy, Elsevier, vol. 132(C), pages 610-620.
    17. Chen, Shiyi & Xiang, Wenguo & Wang, Dong & Xue, Zhipeng, 2012. "Incorporating IGCC and CaO sorption-enhanced process for power generation with CO2 capture," Applied Energy, Elsevier, vol. 95(C), pages 285-294.
    18. Song, Chun Feng & Kitamura, Yutaka & Li, Shu Hong, 2012. "Evaluation of Stirling cooler system for cryogenic CO2 capture," Applied Energy, Elsevier, vol. 98(C), pages 491-501.
    19. Sanchez-Vicente, Yolanda & Tay, Weparn J. & Al Ghafri, Saif Z. & Trusler, J.P. Martin, 2018. "Thermodynamics of carbon dioxide-hydrocarbon systems," Applied Energy, Elsevier, vol. 220(C), pages 629-642.
    20. Li, Didi & Jiang, Xi, 2014. "A numerical study of the impurity effects of nitrogen and sulfur dioxide on the solubility trapping of carbon dioxide geological storage," Applied Energy, Elsevier, vol. 128(C), pages 60-74.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:12:y:2019:i:17:p:3307-:d:261483. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.