IDEAS home Printed from https://ideas.repec.org/a/eee/reensy/v167y2017icp362-375.html
   My bibliography  Save this article

Remove and contraction: A novel method for calculating the reliability of Ethernet ring mesh networks

Author

Listed:
  • Bistouni, Fathollah
  • Jahanshahi, Mohsen

Abstract

Reliability is a key parameter in Ethernet ring mesh networks. Therefore, an accurate analysis of reliability in Ethernet ring mesh including single or multiple rings is a main requirement. Since the calculation of reliability in such networks is an NP-hard problem, nearly most of the previous methods in this regard, were based on approximation. In this article, a new method namely, Remove and Contraction (R&C) is presented which is applicable to Ethernet ring mesh networks for precise calculation of reliability. In addition, the proposed method is a general method, which can be used for reliability analysis in other network systems as well. The analyses show the superiority of the R&C method to previous methods in terms of accuracy.

Suggested Citation

  • Bistouni, Fathollah & Jahanshahi, Mohsen, 2017. "Remove and contraction: A novel method for calculating the reliability of Ethernet ring mesh networks," Reliability Engineering and System Safety, Elsevier, vol. 167(C), pages 362-375.
    • Handle: RePEc:eee:reensy:v:167:y:2017:i:c:p:362-375
    DOI: 10.1016/j.ress.2017.06.016
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0951832016301910
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ress.2017.06.016?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Bistouni, Fathollah & Jahanshahi, Mohsen, 2015. "Evaluating failure rate of fault-tolerant multistage interconnection networks using Weibull life distribution," Reliability Engineering and System Safety, Elsevier, vol. 144(C), pages 128-146.
    2. Hoang Pham, 2006. "System Software Reliability," Springer Series in Reliability Engineering, Springer, number 978-1-84628-295-9, January.
    3. Bistouni, Fathollah & Jahanshahi, Mohsen, 2014. "Analyzing the reliability of shuffle-exchange networks using reliability block diagrams," Reliability Engineering and System Safety, Elsevier, vol. 132(C), pages 97-106.
    4. Gunawan, Indra, 2008. "Reliability analysis of shuffle-exchange network systems," Reliability Engineering and System Safety, Elsevier, vol. 93(2), pages 271-276.
    5. Kang, Won-Hee & Kliese, Alyce, 2014. "A rapid reliability estimation method for directed acyclic lifeline networks with statistically dependent components," Reliability Engineering and System Safety, Elsevier, vol. 124(C), pages 81-91.
    6. Kang, Won-Hee & Song, Junho & Gardoni, Paolo, 2008. "Matrix-based system reliability method and applications to bridge networks," Reliability Engineering and System Safety, Elsevier, vol. 93(11), pages 1584-1593.
    7. Nader Ebrahimi & Kristin McCullough & Zhili Xiao, 2013. "Reliability of sensors based on nanowire networks," IISE Transactions, Taylor & Francis Journals, vol. 45(2), pages 215-228.
    8. Kim, Youngsuk & Kang, Won-Hee, 2013. "Network reliability analysis of complex systems using a non-simulation-based method," Reliability Engineering and System Safety, Elsevier, vol. 110(C), pages 80-88.
    9. Wang, Chaonan & Xing, Liudong & Amari, Suprasad V., 2012. "A fast approximation method for reliability analysis of cold-standby systems," Reliability Engineering and System Safety, Elsevier, vol. 106(C), pages 119-126.
    10. Yoo, Do Guen & Kang, Doosun & Kim, Joong Hoon, 2016. "Optimal design of water supply networks for enhancing seismic reliability," Reliability Engineering and System Safety, Elsevier, vol. 146(C), pages 79-88.
    11. Albert Myers, 2010. "Complex System Reliability," Springer Series in Reliability Engineering, Springer, edition 2, number 978-1-84996-414-2, January.
    12. Schneider, Kellie & Rainwater, Chase & Pohl, Ed & Hernandez, Ivan & Ramirez-Marquez, Jose Emmanuel, 2013. "Social network analysis via multi-state reliability and conditional influence models," Reliability Engineering and System Safety, Elsevier, vol. 109(C), pages 99-109.
    13. Padmavathy, N. & Chaturvedi, Sanjay K., 2013. "Evaluation of mobile ad hoc network reliability using propagation-based link reliability model," Reliability Engineering and System Safety, Elsevier, vol. 115(C), pages 1-9.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Mohsen Jahanshahi & Fathollah Bistouni, 2019. "Reliable networking in Ethernet ring mesh networks using regular topologies," Telecommunication Systems: Modelling, Analysis, Design and Management, Springer, vol. 72(2), pages 199-220, October.
    2. Bistouni, Fathollah & Jahanshahi, Mohsen, 2019. "Reliability-aware ring protection link selection in Ethernet ring mesh networks," Reliability Engineering and System Safety, Elsevier, vol. 191(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Bistouni, Fathollah & Jahanshahi, Mohsen, 2015. "Evaluating failure rate of fault-tolerant multistage interconnection networks using Weibull life distribution," Reliability Engineering and System Safety, Elsevier, vol. 144(C), pages 128-146.
    2. Bistouni, Fathollah & Jahanshahi, Mohsen, 2014. "Analyzing the reliability of shuffle-exchange networks using reliability block diagrams," Reliability Engineering and System Safety, Elsevier, vol. 132(C), pages 97-106.
    3. Fathollah Bistouni & Mohsen Jahanshahi, 2016. "Reliability analysis of multilayer multistage interconnection networks," Telecommunication Systems: Modelling, Analysis, Design and Management, Springer, vol. 62(3), pages 529-551, July.
    4. Li, Jian & Dueñas-Osorio, Leonardo & Chen, Changkun & Shi, Congling, 2016. "Connectivity reliability and topological controllability of infrastructure networks: A comparative assessment," Reliability Engineering and System Safety, Elsevier, vol. 156(C), pages 24-33.
    5. Amit Prakash & Dilip Kumar Yadav & Arvind Choubey, 2020. "Terminal reliability analysis of multistage interconnection networks," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 11(1), pages 110-125, February.
    6. Kawahara, Jun & Sonoda, Koki & Inoue, Takeru & Kasahara, Shoji, 2019. "Efficient construction of binary decision diagrams for network reliability with imperfect vertices," Reliability Engineering and System Safety, Elsevier, vol. 188(C), pages 142-154.
    7. Barranco, Manuel & Proenza, Julián & Almeida, Luís, 2015. "Quantitative characterization of the reliability of simplex buses and stars to compare their benefits in fieldbuses," Reliability Engineering and System Safety, Elsevier, vol. 138(C), pages 163-175.
    8. Mohsen Jahanshahi & Fathollah Bistouni, 2019. "Reliable networking in Ethernet ring mesh networks using regular topologies," Telecommunication Systems: Modelling, Analysis, Design and Management, Springer, vol. 72(2), pages 199-220, October.
    9. Bistouni, Fathollah & Jahanshahi, Mohsen, 2019. "Reliability-aware ring protection link selection in Ethernet ring mesh networks," Reliability Engineering and System Safety, Elsevier, vol. 191(C).
    10. Dehghani, Nariman L. & Zamanian, Soroush & Shafieezadeh, Abdollah, 2021. "Adaptive network reliability analysis: Methodology and applications to power grid," Reliability Engineering and System Safety, Elsevier, vol. 216(C).
    11. Sadoughi, Mohammadkazem & Li, Meng & Hu, Chao, 2018. "Multivariate system reliability analysis considering highly nonlinear and dependent safety events," Reliability Engineering and System Safety, Elsevier, vol. 180(C), pages 189-200.
    12. Joshua L. Pulsipher & Victor M. Zavala, 2020. "Measuring and optimizing system reliability: a stochastic programming approach," TOP: An Official Journal of the Spanish Society of Statistics and Operations Research, Springer;Sociedad de Estadística e Investigación Operativa, vol. 28(3), pages 626-645, October.
    13. Mo, Yuchang & Xing, Liudong & Zhong, Farong & Pan, Zhusheng & Chen, Zhongyu, 2014. "Choosing a heuristic and root node for edge ordering in BDD-based network reliability analysis," Reliability Engineering and System Safety, Elsevier, vol. 131(C), pages 83-93.
    14. Byun, Ji-Eun & Noh, Hee-Min & Song, Junho, 2017. "Reliability growth analysis of k-out-of-N systems using matrix-based system reliability method," Reliability Engineering and System Safety, Elsevier, vol. 165(C), pages 410-421.
    15. Wang, Chaonan & Wang, Xiaolei & Xing, Liudong & Guan, Quanlong & Yang, Chunhui & Yu, Min, 2021. "A Fast and Accurate Reliability Approximation Method for Heterogeneous Cold Standby Sparing Systems," Reliability Engineering and System Safety, Elsevier, vol. 212(C).
    16. Park, Jae-Hyun, 2017. "Time-dependent reliability of wireless networks with dependent failures," Reliability Engineering and System Safety, Elsevier, vol. 165(C), pages 47-61.
    17. Jeongwook Choi & Doosun Kang, 2020. "Improved Hydraulic Simulation of Valve Layout Effects on Post-Earthquake Restoration of a Water Distribution Network," Sustainability, MDPI, vol. 12(8), pages 1-20, April.
    18. Liviu Adrian COTFAS & Andreea DIOSTEANU, 2010. "Software Reliability in Semantic Web Service Composition Applications," Informatica Economica, Academy of Economic Studies - Bucharest, Romania, vol. 14(4), pages 48-56.
    19. Wang, Jie & Zhang, Yangyi & Li, Shunlong & Xu, Wencheng & Jin, Yao, 2024. "Directed network-based connectivity probability evaluation for urban bridges," Reliability Engineering and System Safety, Elsevier, vol. 241(C).
    20. Kwang Yoon Song & In Hong Chang & Hoang Pham, 2019. "A Testing Coverage Model Based on NHPP Software Reliability Considering the Software Operating Environment and the Sensitivity Analysis," Mathematics, MDPI, vol. 7(5), pages 1-21, May.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:reensy:v:167:y:2017:i:c:p:362-375. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: https://www.journals.elsevier.com/reliability-engineering-and-system-safety .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.