IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v164y2018icp21-34.html
   My bibliography  Save this article

Numerical investigation of the effect of microchannel evaporator design and operation on the improvement potential of ejector refrigeration cycles

Author

Listed:
  • Lawrence, Neal
  • Elbel, Stefan

Abstract

Recent ejector studies have focused on the design and performance of the two-phase ejector and its effect on the performance of the ejector cycle. However, recent experimental work has shown that the effect of evaporator design on ejector cycle performance can also be quite significant. In this paper, a numerical model of a microchannel air-to-refrigerant evaporator, capable of accounting for heat transfer and pressure drop effects, is used to investigate the effect that different evaporator dimensions have on the performance of ejector cycles. Two ejector cycles are compared: The standard ejector cycle, in which the ejector is used to directly lift compressor suction pressure, and the ejector recirculation cycle, in which the ejector overfeeds the evaporator but does not directly lift compressor suction pressure. The effects of microchannel port hydraulic diameter, number of evaporator passes, and liquid feed rate are investigated. The analysis is performed with refrigerants R410A and CO2.

Suggested Citation

  • Lawrence, Neal & Elbel, Stefan, 2018. "Numerical investigation of the effect of microchannel evaporator design and operation on the improvement potential of ejector refrigeration cycles," Energy, Elsevier, vol. 164(C), pages 21-34.
    • Handle: RePEc:eee:energy:v:164:y:2018:i:c:p:21-34
    DOI: 10.1016/j.energy.2018.08.179
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544218317158
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2018.08.179?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Besagni, Giorgio & Mereu, Riccardo & Inzoli, Fabio, 2016. "Ejector refrigeration: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 53(C), pages 373-407.
    2. Chen, Jianyong & Jarall, Sad & Havtun, Hans & Palm, Björn, 2015. "A review on versatile ejector applications in refrigeration systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 49(C), pages 67-90.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Besagni, Giorgio, 2019. "Ejectors on the cutting edge: The past, the present and the perspective," Energy, Elsevier, vol. 170(C), pages 998-1003.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Valerie Eveloy & Dereje S. Ayou, 2019. "Sustainable District Cooling Systems: Status, Challenges, and Future Opportunities, with Emphasis on Cooling-Dominated Regions," Energies, MDPI, vol. 12(2), pages 1-64, January.
    2. Hu, Bin & Wu, Di & Wang, R.Z., 2018. "Water vapor compression and its various applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 98(C), pages 92-107.
    3. Karthick, S.K. & Rao, Srisha M.V. & Jagadeesh, G. & Reddy, K.P.J., 2018. "Experimental parametric studies on the performance and mixing characteristics of a low area ratio rectangular supersonic gaseous ejector by varying the secondary flow rate," Energy, Elsevier, vol. 161(C), pages 832-845.
    4. Zhao, Hongxia & Yuan, Tianpeng & Gao, Jia & Wang, Xinli & Yan, Jia, 2019. "Conventional and advanced exergy analysis of parallel and series compression-ejection hybrid refrigeration system for a household refrigerator with R290," Energy, Elsevier, vol. 166(C), pages 845-861.
    5. Knut Emil Ringstad & Krzysztof Banasiak & Åsmund Ervik & Armin Hafner, 2022. "Swirl-Bypass Nozzle for CO 2 Two-Phase Ejectors: Numerical Design Exploration," Energies, MDPI, vol. 15(18), pages 1-30, September.
    6. Valerie Eveloy & Yusra Alkendi, 2021. "Thermodynamic Performance Investigation of a Small-Scale Solar Compression-Assisted Multi-Ejector Indoor Air Conditioning System for Hot Climate Conditions," Energies, MDPI, vol. 14(14), pages 1-31, July.
    7. Elnagar, Essam & Zeoli, Alanis & Rahif, Ramin & Attia, Shady & Lemort, Vincent, 2023. "A qualitative assessment of integrated active cooling systems: A review with a focus on system flexibility and climate resilience," Renewable and Sustainable Energy Reviews, Elsevier, vol. 175(C).
    8. Sun, Fangtian & Chen, Xu & Fu, Lin & Zhang, Shigang, 2018. "Configuration optimization of an enhanced ejector heat exchanger based on an ejector refrigerator and a plate heat exchanger," Energy, Elsevier, vol. 164(C), pages 408-417.
    9. Liu, Bo & Guo, Xiangji & Xi, Xiuzhi & Sun, Jianhua & Zhang, Bo & Yang, Zhuqiang, 2023. "Thermodynamic analyses of ejector refrigeration cycle with zeotropic mixture," Energy, Elsevier, vol. 263(PD).
    10. Hafiz Ali Muhammad & Hafiz Muhammad Abdullah & Zabdur Rehman & Beomjoon Lee & Young-Jin Baik & Jongjae Cho & Muhammad Imran & Manzar Masud & Mohsin Saleem & Muhammad Shoaib Butt, 2020. "Numerical Modeling of Ejector and Development of Improved Methods for the Design of Ejector-Assisted Refrigeration System," Energies, MDPI, vol. 13(21), pages 1-19, November.
    11. Taleghani, S. Taslimi & Sorin, M. & Gaboury, S., 2021. "Thermo-economic analysis of heat-driven ejector system for cooling smelting process exhaust gas," Energy, Elsevier, vol. 220(C).
    12. Song, Tao & Tian, Jinyi & Ni, Long & Shen, Chao & Yao, Yang, 2018. "Experimental study on enhanced separation of a novel de-foulant hydrocyclone with a reflux ejector," Energy, Elsevier, vol. 163(C), pages 490-500.
    13. Gianluca Lillo & Rita Mastrullo & Alfonso William Mauro & Raniero Trinchieri & Luca Viscito, 2020. "Thermo-Economic Analysis of a Hybrid Ejector Refrigerating System Based on a Low Grade Heat Source," Energies, MDPI, vol. 13(3), pages 1-24, January.
    14. Metin, Cagri & Gök, Okan & Atmaca, Ayşe Uğurcan & Erek, Aytunç, 2019. "Numerical investigation of the flow structures inside mixing section of the ejector," Energy, Elsevier, vol. 166(C), pages 1216-1228.
    15. Youhao Xie & Yu Han & Xiaodong Wang & Chuang Wen & Yan Yang, 2023. "Performance Evaluation of a Steam Ejector Considering Non-Equilibrium Condensation in Supersonic Flows," Energies, MDPI, vol. 16(23), pages 1-17, November.
    16. Yu, Binbin & Yang, Jingye & Wang, Dandong & Shi, Junye & Chen, Jiangping, 2019. "An updated review of recent advances on modified technologies in transcritical CO2 refrigeration cycle," Energy, Elsevier, vol. 189(C).
    17. Wu, Yifei & Zhao, Hongxia & Zhang, Cunquan & Wang, Lei & Han, Jitian, 2018. "Optimization analysis of structure parameters of steam ejector based on CFD and orthogonal test," Energy, Elsevier, vol. 151(C), pages 79-93.
    18. Habibi, Mohammad & Aligolzadeh, Farid & Hakkaki-Fard, Ali, 2020. "A techno-economic analysis of geothermal ejector cooling system," Energy, Elsevier, vol. 193(C).
    19. Liang, Xiao & Zhou, Sai & Deng, Jiaju & He, Guogeng & Cai, Dehua, 2019. "Thermodynamic analysis of a novel combined double ejector-absorption refrigeration system using ammonia/salt working pairs without mechanical pumps," Energy, Elsevier, vol. 185(C), pages 895-909.
    20. Chen, Guangming & Ierin, Volodymyr & Volovyk, Oleksii & Shestopalov, Kostyantyn, 2019. "An improved cascade mechanical compression–ejector cooling cycle," Energy, Elsevier, vol. 170(C), pages 459-470.

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:164:y:2018:i:c:p:21-34. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.