IDEAS home Printed from https://ideas.repec.org/p/ind/citdwp/18-08.html
   My bibliography  Save this paper

Weighted index of graph efficiency improvements for a by-production technology and its application to Indian coal-based thermal power sector

Author

Listed:
  • Sushama Murty

    (Jawaharlal Nehru University)

  • Resham Nagpal

    (Jawaharlal Nehru University)

Abstract

In contrast to conventional output-based efficiency indexes that hold input-levels fixed, a graph index of efficiency-improvements (EIs) is derived for a by-production technology by optimizing a weighted average of EIs in input and good and bad output-directions. Trade-offs, which determine optimal-EIs, arise between EIs in good and bad outputs when inefficiencies are removed in emission-causing input-directions. The optimal configurations of EIs for Indian coal-based thermal power plants depend on weights assigned and are correlated with output-based productive-efficiency (OBPE). EIs for plants with high OBPE is limited. With equal weights assigned to EIs in both outputs, optima of plants with moderate OBPE involve greatest EIs in coal-usage and CO2-generation, with no electricity-expansion, while most plants with low OBPE need focus only on electricity expansion with existing coal-usage. With increasing weight on CO2-reduction, EIs in coal-usage and emission-generation at existing electricity-levels become optimal for increasingly more plants, EIs being greatest for lowest-OBPE plants.

Suggested Citation

  • Sushama Murty & Resham Nagpal, "undated". "Weighted index of graph efficiency improvements for a by-production technology and its application to Indian coal-based thermal power sector," Centre for International Trade and Development, Jawaharlal Nehru University, New Delhi Discussion Papers 18-08, Centre for International Trade and Development, Jawaharlal Nehru University, New Delhi, India.
    • Handle: RePEc:ind:citdwp:18-08
    as

    Download full text from publisher

    File URL: https://jnu.ac.in/sites/default/files/citd/DP08_2018.pdf
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Stefan Baumgärtner & Jakob de Swaan Arons, 2003. "Necessity and Inefficiency in the Generation of Waste," Journal of Industrial Ecology, Yale University, vol. 7(2), pages 113-123, April.
    2. Emir Malikov & Subal C. Kumbhakar & Efthymios G. Tsionas, 2015. "Bayesian Approach to Disentangling Technical and Environmental Productivity," Econometrics, MDPI, vol. 3(2), pages 1-23, June.
    3. Sahoo, Nihar R. & Mohapatra, Pratap K.J. & Sahoo, Biresh K. & Mahanty, Biswajit, 2017. "Rationality of energy efficiency improvement targets under the PAT scheme in India – A case of thermal power plants," Energy Economics, Elsevier, vol. 66(C), pages 279-289.
    4. Coggins, Jay S. & Swinton, John R., 1996. "The Price of Pollution: A Dual Approach to Valuing SO2Allowances," Journal of Environmental Economics and Management, Elsevier, vol. 30(1), pages 58-72, January.
    5. Sushama Murty & R. Robert Russell, 2018. "Modeling emission-generating technologies: reconciliation of axiomatic and by-production approaches," Empirical Economics, Springer, vol. 54(1), pages 7-30, February.
    6. Baumol,William J. & Oates,Wallace E., 1988. "The Theory of Environmental Policy," Cambridge Books, Cambridge University Press, number 9780521322249, January.
    7. Hailu, Atakelty & Veeman, Terrence S., 2000. "Environmentally Sensitive Productivity Analysis of the Canadian Pulp and Paper Industry, 1959-1994: An Input Distance Function Approach," Journal of Environmental Economics and Management, Elsevier, vol. 40(3), pages 251-274, November.
    8. Pasurka, Carl Jr., 2006. "Decomposing electric power plant emissions within a joint production framework," Energy Economics, Elsevier, vol. 28(1), pages 26-43, January.
    9. Murty, Sushama & Robert Russell, R. & Levkoff, Steven B., 2012. "On modeling pollution-generating technologies," Journal of Environmental Economics and Management, Elsevier, vol. 64(1), pages 117-135.
    10. Sushama Murty & Resham Nagpal, "undated". "Measuring output-based technical efficiency of Indian coal-based thermal power plants: A by-production approach," Centre for International Trade and Development, Jawaharlal Nehru University, New Delhi Discussion Papers 18-07, Centre for International Trade and Development, Jawaharlal Nehru University, New Delhi, India.
    11. Sushama Murty, 2015. "On the properties of an emission-generating technology and its parametric representation," Economic Theory, Springer;Society for the Advancement of Economic Theory (SAET), vol. 60(2), pages 243-282, October.
    12. Reinhard, Stijn & Knox Lovell, C. A. & Thijssen, Geert J., 2000. "Environmental efficiency with multiple environmentally detrimental variables; estimated with SFA and DEA," European Journal of Operational Research, Elsevier, vol. 121(2), pages 287-303, March.
    13. Murty, M.N. & Kumar, Surender, 2002. "Measuring the cost of environmentally sustainable industrial development in India: a distance function approach," Environment and Development Economics, Cambridge University Press, vol. 7(3), pages 467-486, July.
    14. Stijn Reinhard & C.A. Knox Lovell & Geert Thijssen, 1999. "Econometric Estimation of Technical and Environmental Efficiency: An Application to Dutch Dairy Farms," American Journal of Agricultural Economics, Agricultural and Applied Economics Association, vol. 81(1), pages 44-60.
    15. Cropper, Maureen L & Oates, Wallace E, 1992. "Environmental Economics: A Survey," Journal of Economic Literature, American Economic Association, vol. 30(2), pages 675-740, June.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Sushama Murty & Resham Nagpal, "undated". "Measuring output-based technical efficiency of Indian coal-based thermal power plants: A by-production approach," Centre for International Trade and Development, Jawaharlal Nehru University, New Delhi Discussion Papers 18-07, Centre for International Trade and Development, Jawaharlal Nehru University, New Delhi, India.
    2. Sushama Murty & Resham Nagpal, "undated". "Choice of models for emission-generating technologies and designing technical efficiency improvements," Centre for International Trade and Development, Jawaharlal Nehru University, New Delhi Discussion Papers 19-01, Centre for International Trade and Development, Jawaharlal Nehru University, New Delhi, India.
    3. Sushama Murty & R. Robert Russell, "undated". "Bad Outputs," Centre for International Trade and Development, Jawaharlal Nehru University, New Delhi Discussion Papers 17-06, Centre for International Trade and Development, Jawaharlal Nehru University, New Delhi, India.
    4. Murty, Sushama & Robert Russell, R. & Levkoff, Steven B., 2012. "On modeling pollution-generating technologies," Journal of Environmental Economics and Management, Elsevier, vol. 64(1), pages 117-135.
    5. Kumbhakar, Subal C. & Tsionas, Efthymios G., 2016. "The good, the bad and the technology: Endogeneity in environmental production models," Journal of Econometrics, Elsevier, vol. 190(2), pages 315-327.
    6. Sushama Murty & R. Robert Russell, 2021. "A commentary on “Performance measurement and joint production of intended and unintended outputs” by Finn Førsund," Journal of Productivity Analysis, Springer, vol. 55(3), pages 177-184, June.
    7. Finn R. Førsund, 2021. "Performance measurement and joint production of intended and unintended outputs," Journal of Productivity Analysis, Springer, vol. 55(3), pages 157-175, June.
    8. Sushama Murty, 2015. "On the properties of an emission-generating technology and its parametric representation," Economic Theory, Springer;Society for the Advancement of Economic Theory (SAET), vol. 60(2), pages 243-282, October.
    9. Magambo, Isaiah & Dikgang, Johane & Gelo, Dambala & Tregenna, Fiona, 2021. "Environmental and Technical Efficiency in Large Gold Mines in Developing Countries," MPRA Paper 108068, University Library of Munich, Germany.
    10. Emir Malikov & Raushan Bokusheva & Subal C. Kumbhakar, 2018. "A hedonic-output-index-based approach to modeling polluting technologies," Empirical Economics, Springer, vol. 54(1), pages 287-308, February.
    11. Murty, Sushama & Russell, R. Robert, 2010. "On modeling pollution-generating technologies," The Warwick Economics Research Paper Series (TWERPS) 931, University of Warwick, Department of Economics.
    12. Sushama Murty & Resham Nagpal, "undated". "Measuring marginal abatement costs in the Indian thermal power sector: A by-production approach," Centre for International Trade and Development, Jawaharlal Nehru University, New Delhi Discussion Papers 19-06, Centre for International Trade and Development, Jawaharlal Nehru University, New Delhi, India.
    13. Dakpo, K Hervé, 2016. "On modeling pollution-generating technologies: a new formulation of the by-production approach," Working Papers 245191, Institut National de la recherche Agronomique (INRA), Departement Sciences Sociales, Agriculture et Alimentation, Espace et Environnement (SAE2).
    14. Magambo, Isaiah Hubert & Dikgang, Johane & Gelo, Dambala & Tregenna, Fiona, 2021. "Dynamic Technical and Environmental Efficiency Performance of Large Gold Mines in Developing Countries," EconStor Preprints 235859, ZBW - Leibniz Information Centre for Economics.
    15. Sushama Murty, 2012. "On the properties of an emission-generating technology and its parametric representation," Discussion Papers 1202, University of Exeter, Department of Economics.
    16. Juan Aparicio & Magdalena Kapelko & Lidia Ortiz, 2021. "Modelling environmental inefficiency under a quota system," Operational Research, Springer, vol. 21(2), pages 1097-1124, June.
    17. Bokusheva, Raushan & Kumbhakar, Subal C., 2014. "A Distance Function Model with Good and Bad Outputs," 2014 International Congress, August 26-29, 2014, Ljubljana, Slovenia 182765, European Association of Agricultural Economists.
    18. K Hervé Dakpo, 2016. "On modeling pollution-generating technologies: a new formulation of the by-production approach," Working Papers SMART 16-06, INRAE UMR SMART.
    19. Finn R. Førsund, 2018. "Multi-equation modelling of desirable and undesirable outputs satisfying the materials balance," Empirical Economics, Springer, vol. 54(1), pages 67-99, February.
    20. Subhash C. Ray & Shilpa Sethia, 2023. "A State-Level Resource Allocation Model for Emission Reduction and Efficiency Improvement in Thermal Power Plants," Working papers 2023-08, University of Connecticut, Department of Economics.

    More about this item

    NEP fields

    This paper has been announced in the following NEP Reports:

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:ind:citdwp:18-08. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Shamprasad M. Pujar (email available below). General contact details of provider: https://edirc.repec.org/data/itjnuin.html .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.