IDEAS home Printed from https://ideas.repec.org/a/eee/proeco/v233y2021ics0925527320303674.html
   My bibliography  Save this article

Unveiling the relationship between drivers and capabilities for reduced time-to-market in start-ups: A multi-method approach

Author

Listed:
  • Mota, Renata de Oliveira
  • Godinho Filho, Moacir
  • Osiro, Lauro
  • Ganga, Gilberto Miller Devós
  • Mendes, Glauco Henrique de Sousa

Abstract

Reduced time-to-market (TTM) is mandatory in new product development, especially in uncertain environments. The capabilities for reducing TTM are well known in the literature. However, to the best of our knowledge, no study aims to present the mutual influence between these capabilities and drivers for reducing TTM. Moreover, this subject is insufficiently understood regarding start-ups, the focus of the present research. To mitigate this gap, this paper aims to identify the map of the relationship between the drivers and capabilities for reducing TTM in start-ups. A preliminary list of drivers and capabilities was identified through a Systematic Literature Review and then validated for start-ups in consultation with experts. The Interpretive Structural Modelling (ISM) method was used to develop a hierarchical model, and the analysis of the dependence and driving power of such drivers and capabilities was performed by Fuzzy MICMAC (Matriced’ Impacts Croise's Multiplication Applique'e a’ un Classement). The results showed that five drivers led start-ups to attain nineteen capabilities to reduce their TTM. These capabilities present synergy and can be organised in a structural model that shows the hierarchy among the capabilities, indicating which one should be developed with priority. Concerning practice, the results obtained can provide start-ups and policymakers with a much more efficient roadmap to bring products to market faster and improve the performance of companies.

Suggested Citation

  • Mota, Renata de Oliveira & Godinho Filho, Moacir & Osiro, Lauro & Ganga, Gilberto Miller Devós & Mendes, Glauco Henrique de Sousa, 2021. "Unveiling the relationship between drivers and capabilities for reduced time-to-market in start-ups: A multi-method approach," International Journal of Production Economics, Elsevier, vol. 233(C).
    • Handle: RePEc:eee:proeco:v:233:y:2021:i:c:s0925527320303674
    DOI: 10.1016/j.ijpe.2020.108018
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0925527320303674
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ijpe.2020.108018?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Zhao, Yushan & Cavusgil, Erin & Cavusgil, S. Tamer, 2014. "An investigation of the black-box supplier integration in new product development," Journal of Business Research, Elsevier, vol. 67(6), pages 1058-1064.
    2. Buccieri, Dominic & Javalgi, Raj G. & Cavusgil, Erin, 2020. "International new venture performance: Role of international entrepreneurial culture, ambidextrous innovation, and dynamic marketing capabilities," International Business Review, Elsevier, vol. 29(2).
    3. John Stayton & Vincent Mangematin, 2019. "Seed accelerators and the speed of new venture creation," The Journal of Technology Transfer, Springer, vol. 44(4), pages 1163-1187, August.
    4. Turkay Dereli & Adil Baykasoglu & Gulcin Buyukozkan, 2008. "An affordable Reverse Engineering framework for innovative rapid product development," International Journal of Industrial and Systems Engineering, Inderscience Enterprises Ltd, vol. 3(1), pages 31-37.
    5. Robin Pesch & Ricarda B. Bouncken & Sascha Kraus, 2015. "Effects of Communication Style and Age Diversity in Innovation Teams," International Journal of Innovation and Technology Management (IJITM), World Scientific Publishing Co. Pte. Ltd., vol. 12(06), pages 1-20, December.
    6. Mohan V. Tatikonda & Mitzi M. Montoya-Weiss, 2001. "Integrating Operations and Marketing Perspectives of Product Innovation: The Influence of Organizational Process Factors and Capabilities on Development Performance," Management Science, INFORMS, vol. 47(1), pages 151-172, January.
    7. Lin, Ming-Ji James & Tu, Yu-Cheng & Chen, Der-Chao & Huang, Chin-Hua, 2013. "Customer participation and new product development outcomes: The moderating role of product innovativeness," Journal of Management & Organization, Cambridge University Press, vol. 19(3), pages 314-337, May.
    8. Kuckertz, Andreas & Brändle, Leif & Gaudig, Anja & Hinderer, Sebastian & Morales Reyes, Carlos Arturo & Prochotta, Alicia & Steinbrink, Kathrin M. & Berger, Elisabeth S.C., 2020. "Startups in times of crisis – A rapid response to the COVID-19 pandemic," Journal of Business Venturing Insights, Elsevier, vol. 13(C).
    9. De Toni, Alberto & Meneghetti, Antonella, 2000. "Traditional and innovative paths towards time-based competition," International Journal of Production Economics, Elsevier, vol. 66(3), pages 255-268, July.
    10. Liu, Yulong & Ndubisi, Nelson Oly & Liu, Yang & Barrane, Fatima Zahra, 2020. "New product development and sustainable performance of Chinese SMMEs: The role of dynamic capability and intra-national environmental forces," International Journal of Production Economics, Elsevier, vol. 230(C).
    11. Becker, Markus C. & Salvatore, Pasquale & Zirpoli, Francesco, 2005. "The impact of virtual simulation tools on problem-solving and new product development organization," Research Policy, Elsevier, vol. 34(9), pages 1305-1321, November.
    12. Marc Graner & Magdalena Mißler-Behr, 2015. "Method Application in New Product Development and the Impact on Product Success," International Journal of Innovation and Technology Management (IJITM), World Scientific Publishing Co. Pte. Ltd., vol. 12(04), pages 1-31.
    13. Ting Kong & Gang Li & Taiwen Feng & Linyan Sun, 2015. "Effects of marketing–manufacturing integration across stages of new product development on performance," International Journal of Production Research, Taylor & Francis Journals, vol. 53(8), pages 2269-2284, April.
    14. Jie Yang, 2004. "Knowledge management opportunities for cycle time reduction," International Journal of Innovation and Learning, Inderscience Enterprises Ltd, vol. 1(2), pages 192-207.
    15. Gonzalez-Zapatero, Carmen & Gonzalez-Benito, Javier & Lannelongue, Gustavo, 2017. "Understanding how the functional integration of purchasing and marketing accelerates new product development," International Journal of Production Economics, Elsevier, vol. 193(C), pages 770-780.
    16. Ying Zhang & Lihua Wang & Jie Gao, 2017. "Supplier collaboration and speed-to-market of new products: the mediating and moderating effects," Journal of Intelligent Manufacturing, Springer, vol. 28(3), pages 805-818, March.
    17. Hauke Simon & Jens Leker, 2016. "Using Startup Communication For Opportunity Recognition — An Approach To Identify Future Product Trends," International Journal of Innovation Management (ijim), World Scientific Publishing Co. Pte. Ltd., vol. 20(08), pages 1-22, December.
    18. Pragman, Claudia H., 1996. "JIT II: A purchasing concept for reducing lead times in time-based competition," Business Horizons, Elsevier, vol. 39(4), pages 54-58.
    19. Aghaei Chadegani, Arezoo & Salehi, Hadi & Md Yunus, Melor & Farhadi, Hadi & Fooladi, Masood & Farhadi, Maryam & Ale Ebrahim, Nader, 2013. "A Comparison between Two Main Academic Literature Collections: Web of Science and Scopus Databases," MPRA Paper 46898, University Library of Munich, Germany, revised 18 Mar 2013.
    20. David Moher & Alessandro Liberati & Jennifer Tetzlaff & Douglas G Altman & The PRISMA Group, 2009. "Preferred Reporting Items for Systematic Reviews and Meta-Analyses: The PRISMA Statement," PLOS Medicine, Public Library of Science, vol. 6(7), pages 1-6, July.
    21. Ghezzi, Antonio & Cavallo, Angelo, 2020. "Agile Business Model Innovation in Digital Entrepreneurship: Lean Startup Approaches," Journal of Business Research, Elsevier, vol. 110(C), pages 519-537.
    22. Rondeau, Patrick J. & Ragu-Nathan, T. S. & Vonderembse, Mark A., 2003. "The information systems environment of time-based competitors," Omega, Elsevier, vol. 31(4), pages 253-268, August.
    23. Carbonell, Pilar & Rodriguez, Ana I., 2006. "Designing teams for speedy product development: The moderating effect of technological complexity," Journal of Business Research, Elsevier, vol. 59(2), pages 225-232, February.
    24. Murray R. Millson & David Wilemon, 2010. "The Impact Of Changing Markets And Competition On The Npd Speed/Market Success Relationship," International Journal of Innovation Management (ijim), World Scientific Publishing Co. Pte. Ltd., vol. 14(05), pages 841-870.
    25. Andrea Contigiani & Daniel A Levinthal, 2019. "Situating the construct of lean start-up: adjacent conversations and possible future directions," Industrial and Corporate Change, Oxford University Press and the Associazione ICC, vol. 28(3), pages 551-564.
    26. Morita, Michiya & Machuca, Jose A.D. & Pérez Díez de los Ríos, José L., 2018. "Integration of product development capability and supply chain capability: The driver for high performance adaptation," International Journal of Production Economics, Elsevier, vol. 200(C), pages 68-82.
    27. Vargo, Stephen L. & Akaka, Melissa Archpru & Wieland, Heiko, 2020. "Rethinking the process of diffusion in innovation: A service-ecosystems and institutional perspective," Journal of Business Research, Elsevier, vol. 116(C), pages 526-534.
    28. Marodin, Giuliano & Frank, Alejandro Germán & Tortorella, Guilherme Luz & Netland, Torbjørn, 2018. "Lean product development and lean manufacturing: Testing moderation effects," International Journal of Production Economics, Elsevier, vol. 203(C), pages 301-310.
    29. Valle, Sandra & Vázquez-Bustelo, Daniel, 2009. "Concurrent engineering performance: Incremental versus radical innovation," International Journal of Production Economics, Elsevier, vol. 119(1), pages 136-148, May.
    30. Karthik Ramachandran & V. Krishnan, 2008. "Design Architecture and Introduction Timing for Rapidly Improving Industrial Products," Manufacturing & Service Operations Management, INFORMS, vol. 10(1), pages 149-171, December.
    31. Afonso, Paulo & Nunes, Manuel & Paisana, António & Braga, Ana, 2008. "The influence of time-to-market and target costing in the new product development success," International Journal of Production Economics, Elsevier, vol. 115(2), pages 559-568, October.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Naim Ahmad & Ayman Qahmash, 2021. "SmartISM: Implementation and Assessment of Interpretive Structural Modeling," Sustainability, MDPI, vol. 13(16), pages 1-27, August.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Silvia Sanasi, 2023. "Entrepreneurial experimentation in business model dynamics: Current understanding and future opportunities," International Entrepreneurship and Management Journal, Springer, vol. 19(2), pages 805-836, June.
    2. Daniel E. Ufua & Olusola J. Olujobi & Hammad Tahir & Mamdouh Abdulaziz Saleh Al-Faryan & Oluwatoyin A. Matthew & Evans Osabuohien, 2022. "Lean Entrepreneurship and SME Practice in a Post COVID-19 Pandemic Era: A Conceptual Discourse from Nigeria," Global Journal of Flexible Systems Management, Springer;Global Institute of Flexible Systems Management, vol. 23(3), pages 331-344, September.
    3. Khorshed Alam & Mohammad Afshar Ali & Michael Erdiaw-Kwasie & Md Shahiduzzaman & Eswaran Velayutham & Peter A. Murray & Retha Wiesner, 2022. "Impact of ICTs on Innovation and Performance of Firms: Do Start-ups, Regional Proximity and Skills Matter?," Sustainability, MDPI, vol. 14(10), pages 1-18, May.
    4. Yáñez-Valdés, Claudia & Guerrero, Maribel & Barros-Celume, Sebastián & Ibáñez, María J., 2023. "Winds of change due to global lockdowns: Refreshing digital social entrepreneurship research paradigm," Technological Forecasting and Social Change, Elsevier, vol. 190(C).
    5. Štefan Slávik & Richard Bednár & Ivana Mišúnová Hudáková, 2021. "The Structure of the Start-Up Business Model—Qualitative Analysis," Sustainability, MDPI, vol. 13(15), pages 1-24, July.
    6. Navid Mohammadi & Shaghayegh Sakhteh, 2023. "Start-up accelerator value chain: a systematic literature review," Management Review Quarterly, Springer, vol. 73(2), pages 661-694, June.
    7. Liu, Yulong & Ndubisi, Nelson Oly & Liu, Yang & Barrane, Fatima Zahra, 2020. "New product development and sustainable performance of Chinese SMMEs: The role of dynamic capability and intra-national environmental forces," International Journal of Production Economics, Elsevier, vol. 230(C).
    8. Todd Morgan & Sergey Alexander Anokhin & Chanho Song & Natalia Chistyakova, 2019. "The role of customer participation in building new product development speed capabilities in turbulent environments," International Entrepreneurship and Management Journal, Springer, vol. 15(1), pages 119-133, March.
    9. Beniamino Callegari & Christophe Feder, 2022. "Entrepreneurship and the systemic consequences of epidemics: A literature review and emerging model," International Entrepreneurship and Management Journal, Springer, vol. 18(4), pages 1653-1684, December.
    10. Víctor Hugo Fernández-Bedoya & Monica Elisa Meneses-La-Riva & Josefina Amanda Suyo-Vega & Johanna de Jesús Stephanie Gago-Chávez, 2023. "Entrepreneurship Research in Times of COVID-19: Experiences from South America," Sustainability, MDPI, vol. 15(7), pages 1-17, March.
    11. Gonzalez-Zapatero, Carmen & Gonzalez-Benito, Javier & Lannelongue, Gustavo, 2017. "Understanding how the functional integration of purchasing and marketing accelerates new product development," International Journal of Production Economics, Elsevier, vol. 193(C), pages 770-780.
    12. Verónica Duque-Uribe & William Sarache & Elena Valentina Gutiérrez, 2019. "Sustainable Supply Chain Management Practices and Sustainable Performance in Hospitals: A Systematic Review and Integrative Framework," Sustainability, MDPI, vol. 11(21), pages 1-30, October.
    13. Zahoor, Nadia & Khan, Zaheer & Wu, Jie & Tarba, Shlomo Y. & Donbesuur, Francis & Khan, Huda, 2023. "Vertical alliances and innovation: A systematic review of the literature and a future research agenda," Technovation, Elsevier, vol. 122(C).
    14. Gopalakrishnan, Mohan & Libby, Theresa & Samuels, Janet A. & Swenson, Dan, 2015. "The effect of cost goal specificity and new product development process on cost reduction performance," Accounting, Organizations and Society, Elsevier, vol. 42(C), pages 1-11.
    15. Sima Sabahi & Mahour M. Parast, 2023. "An operations and supply chain management perspective to product innovation," Operations Management Research, Springer, vol. 16(2), pages 808-829, June.
    16. Celeste Vong & Paulo Rita & Nuno António, 2021. "Health-Related Crises in Tourism Destination Management: A Systematic Review," Sustainability, MDPI, vol. 13(24), pages 1-28, December.
    17. Dalton Garcia Borges de Souza & Erivelton Antonio dos Santos & Nei Yoshihiro Soma & Carlos Eduardo Sanches da Silva, 2021. "MCDM-Based R&D Project Selection: A Systematic Literature Review," Sustainability, MDPI, vol. 13(21), pages 1-34, October.
    18. Ghezzi, Antonio, 2020. "How Entrepreneurs make sense of Lean Startup Approaches: Business Models as cognitive lenses to generate fast and frugal Heuristics," Technological Forecasting and Social Change, Elsevier, vol. 161(C).
    19. García-Lillo, Francisco & Seva-Larrosa, Pedro & Sánchez-García, Eduardo, 2023. "What is going on in entrepreneurship research? A bibliometric and SNA analysis," Journal of Business Research, Elsevier, vol. 158(C).
    20. Romina Gómez-Prado & Aldo Alvarez-Risco & Berdy Briggitte Cuya-Velásquez & Marián Arias-Meza & Nilda Campos-Dávalos & Luis Juarez-Rojas & Maria de las Mercedes Anderson-Seminario & Shyla Del-Aguila-Ar, 2022. "Product Innovation, Market Intelligence and Pricing Capability as a Competitive Advantage in the International Performance of Startups: Case of Peru," Sustainability, MDPI, vol. 14(17), pages 1-21, August.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:proeco:v:233:y:2021:i:c:s0925527320303674. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/ijpe .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.