IDEAS home Printed from https://ideas.repec.org/a/eee/proeco/v219y2020icp457-468.html
   My bibliography  Save this article

Examining legitimatisation of additive manufacturing in the interplay between innovation, lean manufacturing and sustainability

Author

Listed:
  • Ghobadian, Abby
  • Talavera, Irene
  • Bhattacharya, Arijit
  • Kumar, Vikas
  • Garza-Reyes, Jose Arturo
  • O'Regan, Nicholas

Abstract

In response to hypercompetition, globalisation and increasing consumer expectations, many manufacturing firms have embraced lean manufacturing (LM). The primary goal of LM is to reduce/eliminate waste (muda). There is broad consensus as to what constitutes waste, but not on LM implementation. Implementation is not prescriptive with each firm relying on a different combination of administrative, process and routine change/innovation. Lean manufacturing brings about incremental change relying on administrative, process and routine levers. It best fits mass production where process variability is low and demand is high and stable. Lean manufacturing can significantly reduce waste but not eliminate waste, and the attained benefits have not always lived up to expectations. Additive manufacturing (AM) promises to revolutionise manufacturing beyond recognition by eliminating or drastically removing the waste thereby achieving sustainability. But AM is at its formative stage – the space between the concept and growth - where many promising breakthrough technologies fail. To reach its full potential, it needs to achieve high-scale adoption. In this paper, we examine how AM can significantly reduce/eliminate waste and how it can deliver triple bottom line on an unprecedented scale. We contend that AM, if adopted deeply and widely, will take LM to its final frontier, but there are a number of impediments to this end. We identify legitimation as critical to its wide diffusion and develop a number of propositions expediting AM's legitimation. Legitimation of AM will ensure its deep and broad diffusion and should this happen, waste will be a thing of the past an important stride towards sustainable future.

Suggested Citation

  • Ghobadian, Abby & Talavera, Irene & Bhattacharya, Arijit & Kumar, Vikas & Garza-Reyes, Jose Arturo & O'Regan, Nicholas, 2020. "Examining legitimatisation of additive manufacturing in the interplay between innovation, lean manufacturing and sustainability," International Journal of Production Economics, Elsevier, vol. 219(C), pages 457-468.
    • Handle: RePEc:eee:proeco:v:219:y:2020:i:c:p:457-468
    DOI: 10.1016/j.ijpe.2018.06.001
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0925527318302433
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ijpe.2018.06.001?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Maurizio Bevilacqua & Filippo Emanuele Ciarapica & Ilaria De Sanctis, 2017. "Lean practices implementation and their relationships with operational responsiveness and company performance: an Italian study," International Journal of Production Research, Taylor & Francis Journals, vol. 55(3), pages 769-794, February.
    2. Laïfi, Amira & Josserand, Emmanuel, 2016. "Legitimation in practice: A new digital publishing business model," Journal of Business Research, Elsevier, vol. 69(7), pages 2343-2352.
    3. Berman, Barry, 2012. "3-D printing: The new industrial revolution," Business Horizons, Elsevier, vol. 55(2), pages 155-162.
    4. Robert M. Solow, 1956. "A Contribution to the Theory of Economic Growth," The Quarterly Journal of Economics, President and Fellows of Harvard College, vol. 70(1), pages 65-94.
    5. Alberto Simboli & Raffaella Taddeo & Anna Morgante, 2014. "Value and Wastes in Manufacturing. An Overview and a New Perspective Based on Eco-Efficiency," Administrative Sciences, MDPI, vol. 4(3), pages 1-19, July.
    6. Olhager, Jan & Prajogo, Daniel I., 2012. "The impact of manufacturing and supply chain improvement initiatives: A survey comparing make-to-order and make-to-stock firms," Omega, Elsevier, vol. 40(2), pages 159-165, April.
    7. Naga Vamsi Krishna Jasti & Rambabu Kodali, 2015. "Lean production: literature review and trends," International Journal of Production Research, Taylor & Francis Journals, vol. 53(3), pages 867-885, February.
    8. Bergek, Anna & Jacobsson, Staffan & Carlsson, Bo & Lindmark, Sven & Rickne, Annika, 2008. "Analyzing the functional dynamics of technological innovation systems: A scheme of analysis," Research Policy, Elsevier, vol. 37(3), pages 407-429, April.
    9. Hellsmark, Hans & Jacobsson, Staffan, 2012. "Realising the potential of gasified biomass in the European Union—Policy challenges in moving from demonstration plants to a larger scale diffusion," Energy Policy, Elsevier, vol. 41(C), pages 507-518.
    10. Amira Laifi & Emmanuel Josserand, 2016. "Legitimation in practice: A new digital publishing business model," Post-Print hal-02075068, HAL.
    11. Geroski, P. A., 2000. "Models of technology diffusion," Research Policy, Elsevier, vol. 29(4-5), pages 603-625, April.
    12. Kainuma, Yasutaka & Tawara, Nobuhiko, 2006. "A multiple attribute utility theory approach to lean and green supply chain management," International Journal of Production Economics, Elsevier, vol. 101(1), pages 99-108, May.
    13. Frank W. Geels, 2005. "Technological Transitions and System Innovations," Books, Edward Elgar Publishing, number 3576.
    14. Gerben van der Panne & Cees van Beers & Alfred Kleinknecht, 2003. "Success and Failure of Innovation: A Literature Review," International Journal of Innovation Management (ijim), World Scientific Publishing Co. Pte. Ltd., vol. 7(03), pages 309-338.
    15. Gebler, Malte & Schoot Uiterkamp, Anton J.M. & Visser, Cindy, 2014. "A global sustainability perspective on 3D printing technologies," Energy Policy, Elsevier, vol. 74(C), pages 158-167.
    16. Giuliano Almeida Marodin & Tarcisio Abreu Saurin, 2015. "Managing barriers to lean production implementation: context matters," International Journal of Production Research, Taylor & Francis Journals, vol. 53(13), pages 3947-3962, July.
    17. Yang, Ma Ga (Mark) & Hong, Paul & Modi, Sachin B., 2011. "Impact of lean manufacturing and environmental management on business performance: An empirical study of manufacturing firms," International Journal of Production Economics, Elsevier, vol. 129(2), pages 251-261, February.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Lai, Kee-hung & Feng, Yunting & Zhu, Qinghua, 2023. "Digital transformation for green supply chain innovation in manufacturing operations," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 175(C).
    2. Feng, Yunting & Lai, Kee-hung & Zhu, Qinghua, 2022. "Green supply chain innovation: Emergence, adoption, and challenges," International Journal of Production Economics, Elsevier, vol. 248(C).
    3. Naghshineh, Bardia & Carvalho, Helena, 2022. "The implications of additive manufacturing technology adoption for supply chain resilience: A systematic search and review," International Journal of Production Economics, Elsevier, vol. 247(C).
    4. Elia, Stefano & Giuffrida, Maria & Mariani, Marcello M. & Bresciani, Stefano, 2021. "Resources and digital export: An RBV perspective on the role of digital technologies and capabilities in cross-border e-commerce," Journal of Business Research, Elsevier, vol. 132(C), pages 158-169.
    5. Bonnín Roca, Jaime & Vaishnav, Parth & Morgan, Granger M. & Fuchs, Erica & Mendonça, Joana, 2021. "Technology Forgiveness: Why emerging technologies differ in their resilience to institutional instability," Technological Forecasting and Social Change, Elsevier, vol. 166(C).
    6. Julian Schwierzy, 2021. "Digitalisation of Production: Industrial Additive Manufacturing and its Implications for Competition and Social Welfare," Munich Papers in Political Economy 16, Munich School of Politics and Public Policy and the School of Management at the Technical University of Munich.
    7. Jia Liu & Jiafeng Ye & Daniel Silva Izquierdo & Aleksandr Vinel & Nima Shamsaei & Shuai Shao, 2023. "A review of machine learning techniques for process and performance optimization in laser beam powder bed fusion additive manufacturing," Journal of Intelligent Manufacturing, Springer, vol. 34(8), pages 3249-3275, December.
    8. Antonio Sartal & Josep Llach & Fernando León-Mateos, 2022. "“Do technologies really affect that much? exploring the potential of several industry 4.0 technologies in today’s lean manufacturing shop floors”," Operational Research, Springer, vol. 22(5), pages 6075-6106, November.
    9. Haug, Anders & Wickstrøm, Kent Adsbøll & Stentoft, Jan & Philipsen, Kristian, 2023. "Adoption of additive manufacturing: A survey of the role of knowledge networks and maturity in small and medium-sized Danish production firms," International Journal of Production Economics, Elsevier, vol. 255(C).
    10. Tancredi Pascucci & Giuseppina Maria Cardella & Brizeida Hernàndez-Sànchez & Jose Carlos Sànchez-Garcìa, 2022. "Environmental Sensitivity to Form a Sustainable Entrepreneurial Intention," Sustainability, MDPI, vol. 14(16), pages 1-17, August.
    11. Gabrielli do Livramento Gonçalves & Walter Leal Filho & Samara da Silva Neiva & André Borchardt Deggau & Manoela de Oliveira Veras & Flávio Ceci & Maurício Andrade de Lima & José Baltazar Salgueirinho, 2021. "The Impacts of the Fourth Industrial Revolution on Smart and Sustainable Cities," Sustainability, MDPI, vol. 13(13), pages 1-21, June.
    12. Marić, Josip & Opazo-Basáez, Marco & Vlačić, Božidar & Dabić, Marina, 2023. "Innovation management of three-dimensional printing (3DP) technology: Disclosing insights from existing literature and determining future research streams," Technological Forecasting and Social Change, Elsevier, vol. 193(C).
    13. Hettiarachchi, Biman Darshana & Brandenburg, Marcus & Seuring, Stefan, 2022. "Connecting additive manufacturing to circular economy implementation strategies: Links, contingencies and causal loops," International Journal of Production Economics, Elsevier, vol. 246(C).
    14. Beltagui, Ahmad & Gold, Stefan & Kunz, Nathan & Reiner, Gerald, 2023. "Special Issue: Rethinking operations and supply chain management in light of the 3D printing revolution," International Journal of Production Economics, Elsevier, vol. 255(C).
    15. Julian Schwierzy & Robert Dehghan & Sebastian Schmidt & Elisa Rodepeter & Andreas Stoemmer & Kaan Uctum & Jan Kinne & David Lenz & Hanna Hottenrott, 2022. "Technology Mapping Using WebAI: The Case of 3D Printing," Papers 2201.01125, arXiv.org.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Sandén, Björn A. & Hillman, Karl M., 2011. "A framework for analysis of multi-mode interaction among technologies with examples from the history of alternative transport fuels in Sweden," Research Policy, Elsevier, vol. 40(3), pages 403-414, April.
    2. Renu Agarwal & Christopher Bajada & Paul James Brown & Roy Green, 2021. "People Management Practices that Underpin Lean Management Outcomes," Global Journal of Flexible Systems Management, Springer;Global Institute of Flexible Systems Management, vol. 22(2), pages 75-94, June.
    3. Francesco Cappa & Fausto Del Sette & Darren Hayes & Federica Rosso, 2016. "How to Deliver Open Sustainable Innovation: An Integrated Approach for a Sustainable Marketable Product," Sustainability, MDPI, vol. 8(12), pages 1-14, December.
    4. Florinda Matos & Radu Godina & Celeste Jacinto & Helena Carvalho & Inês Ribeiro & Paulo Peças, 2019. "Additive Manufacturing: Exploring the Social Changes and Impacts," Sustainability, MDPI, vol. 11(14), pages 1-18, July.
    5. Hellsmark, Hans & Frishammar, Johan & Söderholm, Patrik & Ylinenpää, Håkan, 2016. "The role of pilot and demonstration plants in technology development and innovation policy," Research Policy, Elsevier, vol. 45(9), pages 1743-1761.
    6. Tachia Chin & Francesco Caputo & Yi Shi & Mario Calabrese & Chiraz Aouina‐Mejri & Armando Papa, 2022. "Depicting the role of cross‐cultural legitimacy for responsible innovation in Asian‐Pacific business models: A dialectical systems view of Yin‐Yang harmony," Corporate Social Responsibility and Environmental Management, John Wiley & Sons, vol. 29(6), pages 2083-2093, November.
    7. Dwivedi, Abhishek & Pawsey, Nicholas, 2023. "Examining the drivers of marketing innovation in SMEs," Journal of Business Research, Elsevier, vol. 155(PB).
    8. Ancillai, Chiara & Sabatini, Andrea & Gatti, Marco & Perna, Andrea, 2023. "Digital technology and business model innovation: A systematic literature review and future research agenda," Technological Forecasting and Social Change, Elsevier, vol. 188(C).
    9. Baxter, David & Trott, Paul & Ellwood, Paul, 2023. "Reconceptualising innovation failure," Research Policy, Elsevier, vol. 52(7).
    10. Mueller-Langer, Frank & Scheufen, Marc & Waelbroeck, Patrick, 2020. "Does online access promote research in developing countries? Empirical evidence from article-level data," Research Policy, Elsevier, vol. 49(2).
    11. Caviggioli, Federico & Ughetto, Elisa, 2019. "A bibliometric analysis of the research dealing with the impact of additive manufacturing on industry, business and society," International Journal of Production Economics, Elsevier, vol. 208(C), pages 254-268.
    12. Michael D. van der Merwe & Sara S. Grobbelaar & Cornelius S. L. Schutte & Konrad H. von Leipzig, 2018. "Toward an Enterprise Growth Framework for Entering the Base of the Pyramid Market: A Systematic Review," International Journal of Innovation and Technology Management (IJITM), World Scientific Publishing Co. Pte. Ltd., vol. 15(04), pages 1-34, August.
    13. Barreto, Raul A., 2018. "Fossil fuels, alternative energy and economic growth," Economic Modelling, Elsevier, vol. 75(C), pages 196-220.
    14. Konstantinos Karanasios & Paul Parker, 2018. "Explaining the Diffusion of Renewable Electricity Technologies in Canadian Remote Indigenous Communities through the Technological Innovation System Approach," Sustainability, MDPI, vol. 10(11), pages 1-28, October.
    15. Li, Francis G.N. & Trutnevyte, Evelina & Strachan, Neil, 2015. "A review of socio-technical energy transition (STET) models," Technological Forecasting and Social Change, Elsevier, vol. 100(C), pages 290-305.
    16. Jaya Priyadarshini & Rajesh Kr Singh & Ruchi Mishra & Surajit Bag, 2022. "Investigating the interaction of factors for implementing additive manufacturing to build an antifragile supply chain: TISM-MICMAC approach," Operations Management Research, Springer, vol. 15(1), pages 567-588, June.
    17. Amira Laifi & Yabo Octave Niamié & Olivier Germain, 2023. "The Ignored Legitimation Paradox of Northern Technology-based New Ventures Encountering Southern Contexts: Case Study of a French e-Books Company," Journal of Entrepreneurship and Innovation in Emerging Economies, Entrepreneurship Development Institute of India, vol. 32(2_suppl), pages 159-183, November.
    18. Jan Fagerberg, 2016. "Innovation Systems and Policy: A Tale of Three Countries," Stato e mercato, Società editrice il Mulino, issue 1, pages 13-40.
    19. Holzmann, Patrick & Breitenecker, Robert J. & Schwarz, Erich J. & Gregori, Patrick, 2020. "Business model design for novel technologies in nascent industries: An investigation of 3D printing service providers," Technological Forecasting and Social Change, Elsevier, vol. 159(C).
    20. Fatma M. Utku-İsmihan, 2019. "Knowledge, technological convergence and economic growth: a dynamic panel data analysis of Middle East and North Africa and Latin America," Quality & Quantity: International Journal of Methodology, Springer, vol. 53(2), pages 713-733, March.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:proeco:v:219:y:2020:i:c:p:457-468. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/ijpe .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.