IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v51y2013icp305-313.html
   My bibliography  Save this article

Use of different renewable fuels in a steam reformer integrated into a solid oxide fuel cell: Theoretical analysis and performance comparison

Author

Listed:
  • Saebea, Dang
  • Authayanun, Suthida
  • Patcharavorachot, Yaneeporn
  • Paengjuntuek, Woranee
  • Arpornwichanop, Amornchai

Abstract

Hydrogen production from renewable energy resources has received significant attention with advances in fuel cell technology. The fuel type and operational reforming conditions directly affect fuel cell electricity generation. This study analyzes the theoretical performance of a solid oxide fuel cell (SOFC) integrated with a steam reforming process using three different renewable fuels: ethanol, glycerol and biogas. The effects of key steam reformer operating parameters on the hydrogen production for SOFCs are investigated. The performances of SOFC systems run on different fuels are compared in terms of electrical and thermal efficiencies. It is found that the biogas-fueled SOFC system requires the most energy, whereas the ethanol-fueled SOFC system achieves the highest electrical and thermal efficiencies.

Suggested Citation

  • Saebea, Dang & Authayanun, Suthida & Patcharavorachot, Yaneeporn & Paengjuntuek, Woranee & Arpornwichanop, Amornchai, 2013. "Use of different renewable fuels in a steam reformer integrated into a solid oxide fuel cell: Theoretical analysis and performance comparison," Energy, Elsevier, vol. 51(C), pages 305-313.
    • Handle: RePEc:eee:energy:v:51:y:2013:i:c:p:305-313
    DOI: 10.1016/j.energy.2012.12.014
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544212009267
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2012.12.014?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Chen, Haisheng & Ding, Yulong & Cong, Ngoc T. & Dou, Binlin & Dupont, Valerie & Ghadiri, Mojtaba & Williams, Paul T., 2011. "A comparative study on hydrogen production from steam-glycerol reforming: thermodynamics and experimental," Renewable Energy, Elsevier, vol. 36(2), pages 779-788.
    2. Mohseni, Farzad & Magnusson, Mimmi & Görling, Martin & Alvfors, Per, 2012. "Biogas from renewable electricity – Increasing a climate neutral fuel supply," Applied Energy, Elsevier, vol. 90(1), pages 11-16.
    3. Kwak, Byeong Sub & Lee, Jun Su & Lee, Jun Sung & Choi, Byung-Hyun & Ji, Mi Jung & Kang, Misook, 2011. "Hydrogen-rich gas production from ethanol steam reforming over Ni/Ga/Mg/Zeolite Y catalysts at mild temperature," Applied Energy, Elsevier, vol. 88(12), pages 4366-4375.
    4. Guo, Yong & Azmat, Muhammad Usman & Liu, Xiaohui & Wang, Yanqin & Lu, Guanzhong, 2012. "Effect of support’s basic properties on hydrogen production in aqueous-phase reforming of glycerol and correlation between WGS and APR," Applied Energy, Elsevier, vol. 92(C), pages 218-223.
    5. Denver F. Cheddie, 2010. "Integration of A Solid Oxide Fuel Cell into A 10 MW Gas Turbine Power Plant," Energies, MDPI, vol. 3(4), pages 1-16, April.
    6. Pandya, J.D. & Ghosh, K.K. & Rastogi, S.K., 1988. "A phosphoric acid fuel cell coupled with biogas," Energy, Elsevier, vol. 13(4), pages 383-388.
    7. Sun, Shaohui & Yan, Wei & Sun, Peiqin & Chen, Junwu, 2012. "Thermodynamic analysis of ethanol reforming for hydrogen production," Energy, Elsevier, vol. 44(1), pages 911-924.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Baldinelli, Arianna & Barelli, Linda & Bidini, Gianni, 2015. "Performance characterization and modelling of syngas-fed SOFCs (solid oxide fuel cells) varying fuel composition," Energy, Elsevier, vol. 90(P2), pages 2070-2084.
    2. Slippey, Andrew & Madani, Omid & Nishtala, Kalyan & Das, Tuhin, 2015. "Invariant properties of solid oxide fuel cell systems with integrated reformers," Energy, Elsevier, vol. 90(P1), pages 452-463.
    3. Cheng, Chin-Hsiang & Huang, Yu-Xian & King, Shun-Chih & Lee, Chun-I & Leu, Chih-Hsing, 2014. "CFD (computational fluid dynamics)-based optimal design of a micro-reformer by integrating computational a fluid dynamics code using a simplified conjugate-gradient method," Energy, Elsevier, vol. 70(C), pages 355-365.
    4. Jinwon Yun & Eun-Jung Choi & Sangmin Lee & Younghyeon Kim & Sangseok Yu, 2023. "Evaluation of an Energy Separation Device for the Efficiency Improvement of a Planar Solid Oxide Fuel Cell System with an External Reformer," Energies, MDPI, vol. 16(9), pages 1-14, May.
    5. Chatrattanawet, Narissara & Saebea, Dang & Authayanun, Suthida & Arpornwichanop, Amornchai & Patcharavorachot, Yaneeporn, 2018. "Performance and environmental study of a biogas-fuelled solid oxide fuel cell with different reforming approaches," Energy, Elsevier, vol. 146(C), pages 131-140.
    6. Badur, Janusz & Lemański, Marcin & Kowalczyk, Tomasz & Ziółkowski, Paweł & Kornet, Sebastian, 2018. "Zero-dimensional robust model of an SOFC with internal reforming for hybrid energy cycles," Energy, Elsevier, vol. 158(C), pages 128-138.
    7. Mehran, Muhammad Taqi & Lim, Tak-Hyoung & Lee, Seung-Bok & Lee, Jong-Won & Park, Seok-Ju & Song, Rak-Hyun, 2016. "Long-term performance degradation study of solid oxide carbon fuel cells integrated with a steam gasifier," Energy, Elsevier, vol. 113(C), pages 1051-1061.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Li, Chunlin & Xu, Hengyong & Hou, Shoufu & Sun, Jian & Meng, Fanqiong & Ma, Junguo & Tsubaki, Noritatsu, 2013. "SiC foam monolith catalyst for pressurized adiabatic methane reforming," Applied Energy, Elsevier, vol. 107(C), pages 297-303.
    2. Walluk, Mark R. & Lin, Jiefeng & Waller, Michael G. & Smith, Daniel F. & Trabold, Thomas A., 2014. "Diesel auto-thermal reforming for solid oxide fuel cell systems: Anode off-gas recycle simulation," Applied Energy, Elsevier, vol. 130(C), pages 94-102.
    3. Spallina, V. & Matturro, G. & Ruocco, C. & Meloni, E. & Palma, V. & Fernandez, E. & Melendez, J. & Pacheco Tanaka, A.D. & Viviente Sole, J.L. & van Sint Annaland, M. & Gallucci, F., 2018. "Direct route from ethanol to pure hydrogen through autothermal reforming in a membrane reactor: Experimental demonstration, reactor modelling and design," Energy, Elsevier, vol. 143(C), pages 666-681.
    4. Seckin, Candeniz & Bayulken, Ahmet R., 2013. "Extended Exergy Accounting (EEA) analysis of municipal wastewater treatment – Determination of environmental remediation cost for municipal wastewater," Applied Energy, Elsevier, vol. 110(C), pages 55-64.
    5. Mohseni, Farzad & Görling, Martin & Alvfors, Per, 2013. "The competitiveness of synthetic natural gas as a propellant in the Swedish fuel market," Energy Policy, Elsevier, vol. 52(C), pages 810-818.
    6. Hong, Sung Kook & Dong, Sang Keun & Han, Jeong Ok & Lee, Joong Seong & Lee, Young Chul, 2013. "Numerical study of effect of operating and design parameters for design of steam reforming reactor," Energy, Elsevier, vol. 61(C), pages 410-418.
    7. Xia, Ao & Cheng, Jun & Lin, Richen & Ding, Lingkan & Zhou, Junhu & Cen, Kefa, 2013. "Combination of hydrogen fermentation and methanogenesis to enhance energy conversion efficiency from trehalose," Energy, Elsevier, vol. 55(C), pages 631-637.
    8. Lin, Kuang C. & Lin, Yuan-Chung & Hsiao, Yi-Hsing, 2014. "Microwave plasma studies of Spirulina algae pyrolysis with relevance to hydrogen production," Energy, Elsevier, vol. 64(C), pages 567-574.
    9. Fantozzi, F. & Frassoldati, A. & Bartocci, P. & Cinti, G. & Quagliarini, F. & Bidini, G. & Ranzi, E.M., 2016. "An experimental and kinetic modeling study of glycerol pyrolysis," Applied Energy, Elsevier, vol. 184(C), pages 68-76.
    10. Authayanun, Suthida & Mamlouk, Mohamed & Scott, Keith & Arpornwichanop, Amornchai, 2013. "Comparison of high-temperature and low-temperature polymer electrolyte membrane fuel cell systems with glycerol reforming process for stationary applications," Applied Energy, Elsevier, vol. 109(C), pages 192-201.
    11. Chen, Xiaohang & Wang, Yuan & Zhao, Yingru & Zhou, Yinghui, 2016. "A study of double functions and load matching of a phosphoric acid fuel cell/heat-driven refrigerator hybrid system," Energy, Elsevier, vol. 101(C), pages 359-365.
    12. Brynolf, Selma & Taljegard, Maria & Grahn, Maria & Hansson, Julia, 2018. "Electrofuels for the transport sector: A review of production costs," Renewable and Sustainable Energy Reviews, Elsevier, vol. 81(P2), pages 1887-1905.
    13. Hazra, A. & Basu, M., 2015. "Economic analysis to implement distributed generation system in a rail-way rake maintenance depot," Renewable Energy, Elsevier, vol. 78(C), pages 157-164.
    14. Seretis, A. & Tsiakaras, P., 2016. "Aqueous phase reforming (APR) of glycerol over platinum supported on Al2O3 catalyst," Renewable Energy, Elsevier, vol. 85(C), pages 1116-1126.
    15. Long, Yun-Duo & Fang, Zhen & Su, Tong-Chao & Yang, Qing, 2014. "Co-production of biodiesel and hydrogen from rapeseed and Jatropha oils with sodium silicate and Ni catalysts," Applied Energy, Elsevier, vol. 113(C), pages 1819-1825.
    16. Maghanaki, M. Mohammadi & Ghobadian, B. & Najafi, G. & Galogah, R. Janzadeh, 2013. "Potential of biogas production in Iran," Renewable and Sustainable Energy Reviews, Elsevier, vol. 28(C), pages 702-714.
    17. Kravanja, Zdravko & Čuček, Lidija, 2013. "Multi-objective optimisation for generating sustainable solutions considering total effects on the environment," Applied Energy, Elsevier, vol. 101(C), pages 67-80.
    18. Wu, Zhen & Tan, Peng & Chen, Bin & Cai, Weizi & Chen, Meina & Xu, Xiaoming & Zhang, Zaoxiao & Ni, Meng, 2019. "Dynamic modeling and operation strategy of an NG-fueled SOFC-WGS-TSA-PEMFC hybrid energy conversion system for fuel cell vehicle by using MATLAB/SIMULINK," Energy, Elsevier, vol. 175(C), pages 567-579.
    19. Esteban-Díez, G. & Gil, María V. & Pevida, C. & Chen, D. & Rubiera, F., 2016. "Effect of operating conditions on the sorption enhanced steam reforming of blends of acetic acid and acetone as bio-oil model compounds," Applied Energy, Elsevier, vol. 177(C), pages 579-590.
    20. Taghvaei, Hamed & Shirazi, Meisam Mohamadzadeh & Hooshmand, Navid & Rahimpour, Mohammad Reza & Jahanmiri, Abdolhossien, 2012. "Experimental investigation of hydrogen production through heavy naphtha cracking in pulsed DBD reactor," Applied Energy, Elsevier, vol. 98(C), pages 3-10.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:51:y:2013:i:c:p:305-313. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.