IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v99y2012icp496-512.html
   My bibliography  Save this article

Assessment and comparison of different catalytic coupling exothermic and endothermic reactions: A review

Author

Listed:
  • Rahimpour, M.R.
  • Dehnavi, M.R.
  • Allahgholipour, F.
  • Iranshahi, D.
  • Jokar, S.M.

Abstract

Coupling exothermic with endothermic reactions is proposed as a significant improvement in reactor performance and energy integration. Furthermore, it forms an initial step for process optimization using pinch method. Through coupling of the exothermic reaction with endothermic one, oxidation with reduction, dehydrogenation with hydrogenation, hydration with dehydration, and even a series of tandem reactions, the utilization of energy and materials can be optimized. The underlying goal of this paper is to provide an extensive review through the years 1994–2011 of coupling exothermic and endothermic reactions as an important measure in process integration and intensifying. Developments in coupled reactions, classifying suitable reactors for couplings and categorizing several types of coupling exothermic and endothermic reactions are investigated in this study. Finally, various information concerning coupled reactions are presented in tables. Superiorities of novel models (coupled configurations) to the conventional configurations are clarified. Ultimately, various suggestions are proposed for further work. Results show that the short distance between heat sink and heat source can increase the efficiency of the heat transfer meanwhile incorporating two separated processes with coupled reactors can reduce the size of equipment.

Suggested Citation

  • Rahimpour, M.R. & Dehnavi, M.R. & Allahgholipour, F. & Iranshahi, D. & Jokar, S.M., 2012. "Assessment and comparison of different catalytic coupling exothermic and endothermic reactions: A review," Applied Energy, Elsevier, vol. 99(C), pages 496-512.
    • Handle: RePEc:eee:appene:v:99:y:2012:i:c:p:496-512
    DOI: 10.1016/j.apenergy.2012.04.003
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261912002899
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2012.04.003?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Rahimpour, M.R. & Bahmanpour, A.M., 2011. "Optimization of hydrogen production via coupling of the Fischer-Tropsch synthesis reaction and dehydrogenation of cyclohexane in GTL technology," Applied Energy, Elsevier, vol. 88(6), pages 2027-2036, June.
    2. Vakili, R. & Pourazadi, E. & Setoodeh, P. & Eslamloueyan, R. & Rahimpour, M.R., 2011. "Direct dimethyl ether (DME) synthesis through a thermally coupled heat exchanger reactor," Applied Energy, Elsevier, vol. 88(4), pages 1211-1223, April.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Rahimpour, Mohammad Reza & Jafari, Mitra & Iranshahi, Davood, 2013. "Progress in catalytic naphtha reforming process: A review," Applied Energy, Elsevier, vol. 109(C), pages 79-93.
    2. Junjie Chen & Baofang Liu & Xuhui Gao & Deguang Xu, 2018. "Production of Hydrogen by Methane Steam Reforming Coupled with Catalytic Combustion in Integrated Microchannel Reactors," Energies, MDPI, vol. 11(8), pages 1-31, August.
    3. Hajjaji, Noureddine & Baccar, Ines & Pons, Marie-Noëlle, 2014. "Energy and exergy analysis as tools for optimization of hydrogen production by glycerol autothermal reforming," Renewable Energy, Elsevier, vol. 71(C), pages 368-380.
    4. Ström, Henrik, 2017. "Computational optimization of catalyst distributions at the nano-scale," Applied Energy, Elsevier, vol. 185(P2), pages 2224-2231.
    5. He, Li & Fan, Yilin & Bellettre, Jérôme & Yue, Jun & Luo, Lingai, 2020. "A review on catalytic methane combustion at low temperatures: Catalysts, mechanisms, reaction conditions and reactor designs," Renewable and Sustainable Energy Reviews, Elsevier, vol. 119(C).
    6. Kang, Sanggyu & Lee, Kanghun & Yu, Sangseok & Lee, Sang Min & Ahn, Kook-Young, 2014. "Development of a coupled reactor with a catalytic combustor and steam reformer for a 5kW solid oxide fuel cell system," Applied Energy, Elsevier, vol. 114(C), pages 114-123.
    7. Feng, Yu & Liu, Yuna & Cao, Yong & Gong, Keyu & Liu, Shuyuan & Qin, Jiang, 2020. "Thermal management evaluation for advanced aero-engines using catalytic steam reforming of hydrocarbon fuels," Energy, Elsevier, vol. 193(C).
    8. Ghaebi, Hadi & Yari, Mortaza & Gargari, Saeed Ghavami & Rostamzadeh, Hadi, 2019. "Thermodynamic modeling and optimization of a combined biogas steam reforming system and organic Rankine cycle for coproduction of power and hydrogen," Renewable Energy, Elsevier, vol. 130(C), pages 87-102.
    9. Ribeirinha, P. & Abdollahzadeh, M. & Boaventura, M. & Mendes, A., 2017. "H2 production with low carbon content via MSR in packed bed membrane reactors for high-temperature polymeric electrolyte membrane fuel cell," Applied Energy, Elsevier, vol. 188(C), pages 409-419.
    10. Hajjaji, Noureddine & Chahbani, Amna & Khila, Zouhour & Pons, Marie-Noëlle, 2014. "A comprehensive energy–exergy-based assessment and parametric study of a hydrogen production process using steam glycerol reforming," Energy, Elsevier, vol. 64(C), pages 473-483.
    11. Zhang, Xiaosong & Jin, Hongguang, 2013. "Thermodynamic analysis of chemical-looping hydrogen generation," Applied Energy, Elsevier, vol. 112(C), pages 800-807.
    12. Li, Chunlin & Xu, Hengyong & Hou, Shoufu & Sun, Jian & Meng, Fanqiong & Ma, Junguo & Tsubaki, Noritatsu, 2013. "SiC foam monolith catalyst for pressurized adiabatic methane reforming," Applied Energy, Elsevier, vol. 107(C), pages 297-303.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ryi, Shin-Kun & Lee, Chun-Boo & Lee, Sung-Wook & Hwang, Kyung-Ran & Park, Jong-Soo, 2012. "Hydrogen recovery from ethylene mixture with PD-AU composite membrane," Energy, Elsevier, vol. 47(1), pages 3-10.
    2. Kim, Young-Doo & Yang, Chang-Won & Kim, Beom-Jong & Moon, Ji-Hong & Jeong, Jae-Yong & Jeong, Soo-Hwa & Lee, See-Hoon & Kim, Jae-Ho & Seo, Myung-Won & Lee, Sang-Bong & Kim, Jae-Kon & Lee, Uen-Do, 2016. "Fischer–tropsch diesel production and evaluation as alternative automotive fuel in pilot-scale integrated biomass-to-liquid process," Applied Energy, Elsevier, vol. 180(C), pages 301-312.
    3. Rahimpour, Mohammad Reza & Jafari, Mitra & Iranshahi, Davood, 2013. "Progress in catalytic naphtha reforming process: A review," Applied Energy, Elsevier, vol. 109(C), pages 79-93.
    4. Xu, Shuaiqing & Wang, Yang & Zhang, Xiao & Zhen, Xudong & Tao, Chengjun, 2012. "Development of a novel common-rail type Dimethyl ether (DME) injector," Applied Energy, Elsevier, vol. 94(C), pages 1-12.
    5. Luu, Minh Tri & Milani, Dia & Sharma, Manish & Zeaiter, Joseph & Abbas, Ali, 2016. "Model-based analysis of CO2 revalorization for di-methyl ether synthesis driven by solar catalytic reforming," Applied Energy, Elsevier, vol. 177(C), pages 863-878.
    6. Arab Aboosadi, Z. & Jahanmiri, A.H. & Rahimpour, M.R., 2011. "Optimization of tri-reformer reactor to produce synthesis gas for methanol production using differential evolution (DE) method," Applied Energy, Elsevier, vol. 88(8), pages 2691-2701, August.
    7. Ding, Mingyue & Yang, Yong & Wu, Baoshan & Li, Yongwang & Wang, Tiejun & Ma, Longlong, 2015. "Study on reduction and carburization behaviors of iron phases for iron-based Fischer–Tropsch synthesis catalyst," Applied Energy, Elsevier, vol. 160(C), pages 982-989.
    8. Chen, Hsi-Jen & Fan, Chei-Wei & Yu, Chiou-Shia, 2013. "Analysis, synthesis, and design of a one-step dimethyl ether production via a thermodynamic approach," Applied Energy, Elsevier, vol. 101(C), pages 449-456.
    9. Wang, Ligang & Yang, Yongping & Dong, Changqing & Morosuk, Tatiana & Tsatsaronis, George, 2014. "Multi-objective optimization of coal-fired power plants using differential evolution," Applied Energy, Elsevier, vol. 115(C), pages 254-264.
    10. Chen, Wei-Hsin & Lin, Bo-Jhih & Lee, How-Ming & Huang, Men-Han, 2012. "One-step synthesis of dimethyl ether from the gas mixture containing CO2 with high space velocity," Applied Energy, Elsevier, vol. 98(C), pages 92-101.
    11. Joanna Sobczak & Izabela Wysocka & Stanisław Murgrabia & Andrzej Rogala, 2022. "A Review on Deactivation and Regeneration of Catalysts for Dimethyl Ether Synthesis," Energies, MDPI, vol. 15(15), pages 1-39, July.
    12. Kang, Yinhu & Wang, Quanhai & Lu, Xiaofeng & Wan, Hu & Ji, Xuanyu & Wang, Hu & Guo, Qiang & Yan, Jin & Zhou, Jinliang, 2015. "Experimental and numerical study on NOx and CO emission characteristics of dimethyl ether/air jet diffusion flame," Applied Energy, Elsevier, vol. 149(C), pages 204-224.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:99:y:2012:i:c:p:496-512. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.