IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v98y2012icp92-101.html
   My bibliography  Save this article

One-step synthesis of dimethyl ether from the gas mixture containing CO2 with high space velocity

Author

Listed:
  • Chen, Wei-Hsin
  • Lin, Bo-Jhih
  • Lee, How-Ming
  • Huang, Men-Han

Abstract

Dimethyl ether (DME) has been considered as a potential hydrogen carrier used in fuel cells; it can also be consumed as a diesel substitute or chemicals. To develop the technique of DME synthesis, a bifunctional Cu–ZnO–Al2O3/ZSM5 catalyst is prepared using a coprecipitation method. The reaction characteristics of DME synthesis from syngas at a high space velocity of 15,000mL (gcath)−1 are investigated and the effects of reaction temperature, pressure, CO2 concentration and ZSM5 amount on the synthesis are taken into account. The results suggest that an increase in CO2 concentration in the feed gas substantially decreases the DME formation. The optimum reaction temperature always occurs at 225°C, regardless of what the pressure is. It is thus recognized that the DME synthesis is governed by two different mechanisms when the reaction temperature varies. At lower reaction temperatures (<225°C) the reaction is dominated by chemical kinetics, whereas thermodynamic equilibrium is the dominant mechanism as the reaction temperature is higher (>225°C). For the CO2 content of 5vol.% and the pressure of 40atm, the maximum DME yield is 1.89g (gcath)−1. It is also found that 0.2g of ZSM5 is sufficient to be blended with 1g of the catalyst for DME synthesis.

Suggested Citation

  • Chen, Wei-Hsin & Lin, Bo-Jhih & Lee, How-Ming & Huang, Men-Han, 2012. "One-step synthesis of dimethyl ether from the gas mixture containing CO2 with high space velocity," Applied Energy, Elsevier, vol. 98(C), pages 92-101.
    • Handle: RePEc:eee:appene:v:98:y:2012:i:c:p:92-101
    DOI: 10.1016/j.apenergy.2012.02.082
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261912001845
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2012.02.082?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Pellegrini, Laura A. & Soave, Giorgio & Gamba, Simone & Langè, Stefano, 2011. "Economic analysis of a combined energy–methanol production plant," Applied Energy, Elsevier, vol. 88(12), pages 4891-4897.
    2. Stelmachowski, Marek & Nowicki, Lech, 2003. "Fuel from the synthesis gas--the role of process engineering," Applied Energy, Elsevier, vol. 74(1-2), pages 85-93, January.
    3. Liang, Chen & Ji, Changwei & Liu, Xiaolong, 2011. "Combustion and emissions performance of a DME-enriched spark-ignited methanol engine at idle condition," Applied Energy, Elsevier, vol. 88(11), pages 3704-3711.
    4. Vakili, R. & Pourazadi, E. & Setoodeh, P. & Eslamloueyan, R. & Rahimpour, M.R., 2011. "Direct dimethyl ether (DME) synthesis through a thermally coupled heat exchanger reactor," Applied Energy, Elsevier, vol. 88(4), pages 1211-1223, April.
    5. Chmielniak, Tomasz & Sciazko, Marek, 2003. "Co-gasification of biomass and coal for methanol synthesis," Applied Energy, Elsevier, vol. 74(3-4), pages 393-403, March.
    6. Namasivayam, A.M. & Korakianitis, T. & Crookes, R.J. & Bob-Manuel, K.D.H. & Olsen, J., 2010. "Biodiesel, emulsified biodiesel and dimethyl ether as pilot fuels for natural gas fuelled engines," Applied Energy, Elsevier, vol. 87(3), pages 769-778, March.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Chen, Wei-Hsin & Lin, Shih-Cheng, 2015. "Reaction phenomena of catalytic partial oxidation of methane under the impact of carbon dioxide addition and heat recirculation," Energy, Elsevier, vol. 82(C), pages 206-217.
    2. Chen, Wei-Hsin & Hsu, Chih-Liang & Wang, Xiao-Dong, 2016. "Thermodynamic approach and comparison of two-step and single step DME (dimethyl ether) syntheses with carbon dioxide utilization," Energy, Elsevier, vol. 109(C), pages 326-340.
    3. Zuo, Hongmei & Mao, Dongsen & Guo, Xiaoming & Yu, Jun, 2018. "Highly efficient synthesis of dimethyl ether directly from biomass-derived gas over Li-modified Cu-ZnO-Al2O3/HZSM-5 hybrid catalyst," Renewable Energy, Elsevier, vol. 116(PA), pages 38-47.
    4. Chen, Wei-Hsin & Shen, Chun-Ting, 2016. "Partial oxidation of methanol over a Pt/Al2O3 catalyst enhanced by sprays," Energy, Elsevier, vol. 106(C), pages 1-12.
    5. Lu, Peng & Sun, Jian & Shen, Dongming & Yang, Ruiqin & Xing, Chuang & Lu, Chengxue & Tsubaki, Noritatsu & Shan, Shengdao, 2018. "Direct syngas conversion to liquefied petroleum gas: Importance of a multifunctional metal-zeolite interface," Applied Energy, Elsevier, vol. 209(C), pages 1-7.
    6. Chen, Wei-Hsin & Lin, Shih-Cheng, 2016. "Characterization of catalytic partial oxidation of methane with carbon dioxide utilization and excess enthalpy recovery," Applied Energy, Elsevier, vol. 162(C), pages 1141-1152.
    7. Bakhtyari, Ali & Bardool, Roghayeh & Rahimpour, Mohammad Reza & Iulianelli, Adolfo, 2021. "Dehydration of bio-alcohols in an enhanced membrane-assisted reactor: A rigorous sensitivity analysis and multi-objective optimization," Renewable Energy, Elsevier, vol. 177(C), pages 519-543.
    8. Joanna Sobczak & Izabela Wysocka & Stanisław Murgrabia & Andrzej Rogala, 2022. "A Review on Deactivation and Regeneration of Catalysts for Dimethyl Ether Synthesis," Energies, MDPI, vol. 15(15), pages 1-39, July.
    9. Enbin Liu & Xudong Lu & Daocheng Wang, 2023. "A Systematic Review of Carbon Capture, Utilization and Storage: Status, Progress and Challenges," Energies, MDPI, vol. 16(6), pages 1-48, March.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Xu, Shuaiqing & Wang, Yang & Zhang, Xiao & Zhen, Xudong & Tao, Chengjun, 2012. "Development of a novel common-rail type Dimethyl ether (DME) injector," Applied Energy, Elsevier, vol. 94(C), pages 1-12.
    2. Kang, Yinhu & Wang, Quanhai & Lu, Xiaofeng & Wan, Hu & Ji, Xuanyu & Wang, Hu & Guo, Qiang & Yan, Jin & Zhou, Jinliang, 2015. "Experimental and numerical study on NOx and CO emission characteristics of dimethyl ether/air jet diffusion flame," Applied Energy, Elsevier, vol. 149(C), pages 204-224.
    3. Wang, Xin & Ge, Yunshan & Zhang, Chuanzhen & Tan, Jianwei & Hao, Lijun & Liu, Jia & Gong, Huiming, 2016. "Effects of engine misfire on regulated, unregulated emissions from a methanol-fueled vehicle and its ozone forming potential," Applied Energy, Elsevier, vol. 177(C), pages 187-195.
    4. Chen, Wei-Hsin & Lin, Bo-Jhih, 2013. "Hydrogen and synthesis gas production from activated carbon and steam via reusing carbon dioxide," Applied Energy, Elsevier, vol. 101(C), pages 551-559.
    5. Chen, Hsi-Jen & Fan, Chei-Wei & Yu, Chiou-Shia, 2013. "Analysis, synthesis, and design of a one-step dimethyl ether production via a thermodynamic approach," Applied Energy, Elsevier, vol. 101(C), pages 449-456.
    6. Liang, Chen & Ji, Changwei & Gao, Binbin, 2013. "Load characteristics of a spark-ignited ethanol engine with DME enrichment," Applied Energy, Elsevier, vol. 112(C), pages 500-506.
    7. Zhen, Xudong & Wang, Yang, 2015. "An overview of methanol as an internal combustion engine fuel," Renewable and Sustainable Energy Reviews, Elsevier, vol. 52(C), pages 477-493.
    8. Kotowicz, Janusz & Sobolewski, Aleksander & Iluk, Tomasz, 2013. "Energetic analysis of a system integrated with biomass gasification," Energy, Elsevier, vol. 52(C), pages 265-278.
    9. Zhang, Ziyin & Pang, Shusheng & Levi, Tana, 2017. "Influence of AAEM species in coal and biomass on steam co-gasification of chars of blended coal and biomass," Renewable Energy, Elsevier, vol. 101(C), pages 356-363.
    10. Ogunkoya, Dolanimi & Li, Shuai & Rojas, Orlando J. & Fang, Tiegang, 2015. "Performance, combustion, and emissions in a diesel engine operated with fuel-in-water emulsions based on lignin," Applied Energy, Elsevier, vol. 154(C), pages 851-861.
    11. Liang, Chen & Ji, Changwei & Liu, Xiaolong, 2011. "Combustion and emissions performance of a DME-enriched spark-ignited methanol engine at idle condition," Applied Energy, Elsevier, vol. 88(11), pages 3704-3711.
    12. Zhang, Hanfei & Wang, Ligang & Pérez-Fortes, Mar & Van herle, Jan & Maréchal, François & Desideri, Umberto, 2020. "Techno-economic optimization of biomass-to-methanol with solid-oxide electrolyzer," Applied Energy, Elsevier, vol. 258(C).
    13. Manju Dhakad Tanwar & Felipe Andrade Torres & Ali Mubarak Alqahtani & Pankaj Kumar Tanwar & Yashas Bhand & Omid Doustdar, 2023. "Promising Bioalcohols for Low-Emission Vehicles," Energies, MDPI, vol. 16(2), pages 1-22, January.
    14. Wang, Ying & Xiao, Fan & Zhao, Yuwei & Li, Dongchang & Lei, Xiong, 2015. "Study on cycle-by-cycle variations in a diesel engine with dimethyl ether as port premixing fuel," Applied Energy, Elsevier, vol. 143(C), pages 58-70.
    15. Chen, Wei-Hsin & Chen, Chih-Jung & Hung, Chen-I & Shen, Cheng-Hsien & Hsu, Heng-Wen, 2013. "A comparison of gasification phenomena among raw biomass, torrefied biomass and coal in an entrained-flow reactor," Applied Energy, Elsevier, vol. 112(C), pages 421-430.
    16. Gong, Changming & Yi, Lin & Zhang, Zilei & Sun, Jingzhen & Liu, Fenghua, 2020. "Assessment of ultra-lean burn characteristics for a stratified-charge direct-injection spark-ignition methanol engine under different high compression ratios," Applied Energy, Elsevier, vol. 261(C).
    17. Mahmudul, H.M. & Hagos, F.Y. & Mamat, R. & Adam, A. Abdul & Ishak, W.F.W. & Alenezi, R., 2017. "Production, characterization and performance of biodiesel as an alternative fuel in diesel engines – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 72(C), pages 497-509.
    18. Lin, Lin & Cunshan, Zhou & Vittayapadung, Saritporn & Xiangqian, Shen & Mingdong, Dong, 2011. "Opportunities and challenges for biodiesel fuel," Applied Energy, Elsevier, vol. 88(4), pages 1020-1031, April.
    19. Ding, Mingyue & Tu, Junling & Qiu, Minghuang & Wang, Tiejun & Ma, Longlong & Li, Yuping, 2015. "Impact of potassium promoter on Cu–Fe based mixed alcohols synthesis catalyst," Applied Energy, Elsevier, vol. 138(C), pages 584-589.
    20. Prapatsorn Borisut & Aroonsri Nuchitprasittichai, 2020. "Process Configuration Studies of Methanol Production via Carbon Dioxide Hydrogenation: Process Simulation-Based Optimization Using Artificial Neural Networks," Energies, MDPI, vol. 13(24), pages 1-13, December.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:98:y:2012:i:c:p:92-101. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.