IDEAS home Printed from https://ideas.repec.org/a/spr/ijsaem/v15y2024i8d10.1007_s13198-023-02022-y.html
   My bibliography  Save this article

Reliability evaluation of a programmable logic controller based system

Author

Listed:
  • Mangey Ram

    (Graphic Era Deemed to be University)

  • Subhi Tyagi

    (Chandigarh University)

  • Akshay Kumar

    (Graphic Era Hill University)

Abstract

This research proposes a Programmable Logic Controller (PLC) based system that make black salt. In this system, there exists funnels where the salt is supposed to heat up for few hours and gets converted into black salt afterwards. With every funnel, two burners are connected in parallel with different level of intensity. Then there are also temperature sensors in the funnel to sense the temperature and help PLC to maintain a given range of temperature in the funnel. Both burner and sensor are considered to have multi-state with various performance level, from complete failure to perfectly working and both are connected to each other in series. Set of burners and sensors in a funnel together form one subsystem where the system as a whole is considered a k-out-of-n:G type. So, out of n funnels, k are supposed to work at a time, and if there will be any failure in any subsystem the PLC will automatically starts another subsystem to function. The elements are considered to be repairable, and reliability of the proposed system is computed from universal generating function technique. Also, numerical examples are presented to illustrate the model by taking different functioning conditions and the proposed algorithm.

Suggested Citation

  • Mangey Ram & Subhi Tyagi & Akshay Kumar, 2024. "Reliability evaluation of a programmable logic controller based system," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 15(8), pages 3620-3628, August.
    • Handle: RePEc:spr:ijsaem:v:15:y:2024:i:8:d:10.1007_s13198-023-02022-y
    DOI: 10.1007/s13198-023-02022-y
    as

    Download full text from publisher

    File URL: http://link.springer.com/10.1007/s13198-023-02022-y
    File Function: Abstract
    Download Restriction: Access to the full text of the articles in this series is restricted.
    File URL: https://libkey.io/10.1007/s13198-023-02022-y?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Bairamov, Ismihan & Arnold, Barry C., 2008. "On the residual lifelengths of the remaining components in an n-k+1 out of n system," Statistics & Probability Letters, Elsevier, vol. 78(8), pages 945-952, June.
    2. Jafary, Bentolhoda & Fiondella, Lance, 2016. "A universal generating function-based multi-state system performance model subject to correlated failures," Reliability Engineering and System Safety, Elsevier, vol. 152(C), pages 16-27.
    3. Pourkarim Guilani, Pedram & Sharifi, Mani & Niaki, S.T.A. & Zaretalab, Arash, 2014. "Reliability evaluation of non-reparable three-state systems using Markov model and its comparison with the UGF and the recursive methods," Reliability Engineering and System Safety, Elsevier, vol. 129(C), pages 29-35.
    4. Mo, Yuchang & Xing, Liudong & Zhang, Lejun & Cai, Shaobin, 2020. "Performability analysis of multi-state sliding window systems," Reliability Engineering and System Safety, Elsevier, vol. 202(C).
    5. Gregory Levitin, 2005. "The Universal Generating Function in Reliability Analysis and Optimization," Springer Series in Reliability Engineering, Springer, number 978-1-84628-245-4, July.
    6. Lu, Shaoqi & Shi, Daimin & Xiao, Hui, 2019. "Reliability of sliding window systems with two failure modes," Reliability Engineering and System Safety, Elsevier, vol. 188(C), pages 366-376.
    7. Rui Peng, 2019. "Optimal component allocation in a multi-state system with hierarchical performance sharing groups," Journal of the Operational Research Society, Taylor & Francis Journals, vol. 70(4), pages 581-587, April.
    8. Wang, Guanjun & Duan, Fengjun & Zhou, Yifan, 2018. "Reliability evaluation of multi-state series systems with performance sharing," Reliability Engineering and System Safety, Elsevier, vol. 173(C), pages 58-63.
    9. Xiao, Hui & Zhang, Yiyun & Xiang, Yisha & Peng, Rui, 2020. "Optimal design of a linear sliding window system with consideration of performance sharing," Reliability Engineering and System Safety, Elsevier, vol. 198(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Wu, Di & Chi, Yuanying & Peng, Rui & Sun, Mengyao, 2019. "Reliability of capacitated systems with performance sharing mechanism," Reliability Engineering and System Safety, Elsevier, vol. 189(C), pages 335-344.
    2. Tian, Tianzi & Yang, Jun & Li, Lei & Wang, Ning, 2023. "Reliability assessment of performance-based balanced systems with rebalancing mechanisms," Reliability Engineering and System Safety, Elsevier, vol. 233(C).
    3. Wang, Wei & Fang, Chao & Wang, Yan & Li, Jin, 2022. "Reliability Modeling and Optimization of Circular Multi-State Sliding Time Window System with Sequential Demands," Reliability Engineering and System Safety, Elsevier, vol. 225(C).
    4. Wu, Congshan & Zhao, Xian & Wang, Xiaoyue & Wang, Siqi, 2021. "Reliability analysis of performance-based balanced systems with common bus performance sharing," Reliability Engineering and System Safety, Elsevier, vol. 215(C).
    5. Wang, Wei & Fang, Chao & Liu, Shan & Xiang, Yisha, 2021. "Reliability analysis and optimization of multi-state sliding window system with sequential demands and time constraints," Reliability Engineering and System Safety, Elsevier, vol. 208(C).
    6. Gu, Liudong & Wang, Guanjun & Zhou, Yifan & Peng, Rui, 2024. "Reliability optimization of multi-state systems with two performance sharing groups," Reliability Engineering and System Safety, Elsevier, vol. 241(C).
    7. Gu, Liudong & Wang, Guanjun & Zhou, Yifan, 2024. "Optimal allocation of multi-state performance sharing systems with multiple common buses," Reliability Engineering and System Safety, Elsevier, vol. 247(C).
    8. Cao, Minhao & Guo, Jianjun & Xiao, Hui & Wu, Liang, 2022. "Reliability analysis and optimal generator allocation and protection strategy of a non-repairable power grid system," Reliability Engineering and System Safety, Elsevier, vol. 222(C).
    9. Ma, Ye & Chi, Yuanying & Wu, Di & Peng, Rui & Wu, Shaomin, 2021. "Reliability of integrated electricity and gas supply system with performance substitution and sharing mechanisms," Reliability Engineering and System Safety, Elsevier, vol. 212(C).
    10. Ding, Yi & Hu, Yishuang & Li, Daqing, 2021. "Redundancy Optimization for Multi-Performance Multi-State Series-Parallel Systems Considering Reliability Requirements," Reliability Engineering and System Safety, Elsevier, vol. 215(C).
    11. Su, Peng & Wang, Guanjun & Duan, Fengjun, 2020. "Reliability evaluation of a k-out-of-n(G)-subsystem based multi-state system with common bus performance sharing," Reliability Engineering and System Safety, Elsevier, vol. 198(C).
    12. Wang, Wei & Lin, Mingqiang & Si, Peng & Wang, Yan & Fan, Binning, 2023. "BCMS4W-ST: On the Bi-directional Circular Multi-State System with Spatiotemporal Sliding Window for Sequential Tasks," Reliability Engineering and System Safety, Elsevier, vol. 240(C).
    13. Hui Xiao & Minhao Cao & Gang Kou & Xiaojun Yuan, 2021. "Optimal element allocation and sequencing of multi-state series systems with two levels of performance sharing," Journal of Risk and Reliability, , vol. 235(2), pages 282-292, April.
    14. Xiao, Hui & Zhang, Yiyun & Xiang, Yisha & Peng, Rui, 2020. "Optimal design of a linear sliding window system with consideration of performance sharing," Reliability Engineering and System Safety, Elsevier, vol. 198(C).
    15. Bigatti, A.M. & Pascual-Ortigosa, P. & Sáenz-de-Cabezón, E., 2021. "A C++ class for multi-state algebraic reliability computations," Reliability Engineering and System Safety, Elsevier, vol. 213(C).
    16. Peng, Rui & Xiao, Hui & Liu, Hanlin, 2017. "Reliability of multi-state systems with a performance sharing group of limited size," Reliability Engineering and System Safety, Elsevier, vol. 166(C), pages 164-170.
    17. Zhao, Xian & Han, He & Jiao, Chunhui & Qiu, Qingan, 2024. "Reliability modeling of k-out-of-n: F balanced systems with common bus performance sharing," Reliability Engineering and System Safety, Elsevier, vol. 248(C).
    18. Sadiya & Mangey Ram & Akshay Kumar, 2022. "A New Approach to Compute System Reliability with Three-Serially Linked Modules," Mathematics, MDPI, vol. 11(1), pages 1-18, December.
    19. Wu, Congshan & Zhao, Xian & Wang, Siqi & Song, Yanbo, 2022. "Reliability analysis of consecutive-k-out-of-r-from-n subsystems: F balanced systems with load sharing," Reliability Engineering and System Safety, Elsevier, vol. 228(C).
    20. Sadiya Naaz & Rashmi Khanna & Riya Rawat & Neha Negi & Mangey Ram & Akshay Kumar & Anuj Kumar, 2024. "Signature reliability analysis of complex consecutive k-out-of-n:W CMO system via UGF and SFA," Journal of Risk and Reliability, , vol. 238(5), pages 1037-1052, October.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:spr:ijsaem:v:15:y:2024:i:8:d:10.1007_s13198-023-02022-y. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sonal Shukla or Springer Nature Abstracting and Indexing (email available below). General contact details of provider: http://www.springer.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.