IDEAS home Printed from https://ideas.repec.org/a/pal/jorsoc/v58y2007i3d10.1057_palgrave.jors.2602152.html
   My bibliography  Save this article

Modelling the operations of a component placement machine with rotational turret and stationary component magazine

Author

Listed:
  • E Duman

    (Dogus University)

Abstract

Two major problems faced in the automated assembly of printed circuit boards are the determination of a component placement sequence and the internal arrangement of the component tapes in the feeder mechanism. The forms of these problems depend mainly on the physical design of the placement machine. The definition and solution of these optimization problems are attempted by many researchers and it is possible to find lots of relevant papers in the literature. However, most of these studies are concentrated on certain machine designs. In this study, the focus is on a particular machine type that has a rotational turret and a stationary component magazine. So far, this type of machine has received little attention among the researchers. The definition of the placement sequencing and feeder configuration problems are given and solution procedures are suggested. The performance of the suggested procedures are tested on real and randomly generated PCB assembly data.

Suggested Citation

  • E Duman, 2007. "Modelling the operations of a component placement machine with rotational turret and stationary component magazine," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 58(3), pages 317-325, March.
    • Handle: RePEc:pal:jorsoc:v:58:y:2007:i:3:d:10.1057_palgrave.jors.2602152
    DOI: 10.1057/palgrave.jors.2602152
    as

    Download full text from publisher

    File URL: http://link.springer.com/10.1057/palgrave.jors.2602152
    File Function: Abstract
    Download Restriction: Access to full text is restricted to subscribers.
    File URL: https://libkey.io/10.1057/palgrave.jors.2602152?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Leipala, Timo & Nevalainen, Olli, 1989. "Optimization of the movements of a component placement machine," European Journal of Operational Research, Elsevier, vol. 38(2), pages 167-177, January.
    2. Michael O. Ball & Michael J. Magazine, 1988. "Sequencing of Insertions in Printed Circuit Board Assembly," Operations Research, INFORMS, vol. 36(2), pages 192-201, April.
    3. Gronalt, M. & Grunow, M. & Gunther, H. O. & Zeller, R., 1997. "A heuristic for component switching on SMT placement machines," International Journal of Production Economics, Elsevier, vol. 53(2), pages 181-190, November.
    4. Foulds, L. R. & Hamacher, H. W., 1993. "Optimal bin location and sequencing in printed circuit board assembly," European Journal of Operational Research, Elsevier, vol. 66(3), pages 279-290, May.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Klomp, Cornelis & van de Klundert, Joris & Spieksma, Frits C. R. & Voogt, Siem, 2000. "The feeder rack assignment problem in PCB assembly: A case study," International Journal of Production Economics, Elsevier, vol. 64(1-3), pages 399-407, March.
    2. Crama, Yves & Flippo, Olaf E. & van de Klundert, Joris & Spieksma, Frits C. R., 1997. "The assembly of printed circuit boards: A case with multiple machines and multiple board types," European Journal of Operational Research, Elsevier, vol. 98(3), pages 457-472, May.
    3. T Knuutila & S Pyöttiälä & O S Nevalainen, 2007. "Minimizing the number of pickups on a multi-head placement machine," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 58(1), pages 115-121, January.
    4. Kazaz, Burak & Altinkemer, Kemal, 2003. "Optimization of multi-feeder (depot) printed circuit board manufacturing with error guarantees," European Journal of Operational Research, Elsevier, vol. 150(2), pages 370-394, October.
    5. Altinkemer, Kemal & Kazaz, Burak & Koksalan, Murat & Moskowitz, Herbert, 2000. "Optimization of printed circuit board manufacturing: Integrated modeling and algorithms," European Journal of Operational Research, Elsevier, vol. 124(2), pages 409-421, July.
    6. Torabi, S.A. & Hamedi, M. & Ashayeri, J., 2010. "A Multi-Objective Optimization Approach for Multi-Head Beam-Type Placement Machines," Other publications TiSEM 8ea272ae-66f1-4999-aec7-8, Tilburg University, School of Economics and Management.
    7. Sun, Dong-Seok & Lee, Tae-Eog & Kim, Kyung-Hoon, 2005. "Component allocation and feeder arrangement for a dual-gantry multi-head surface mounting placement tool," International Journal of Production Economics, Elsevier, vol. 95(2), pages 245-264, February.
    8. Ayob, Masri & Kendall, Graham, 2008. "A survey of surface mount device placement machine optimisation: Machine classification," European Journal of Operational Research, Elsevier, vol. 186(3), pages 893-914, May.
    9. Ji, P. & Sze, M. T. & Lee, W. B., 2001. "A genetic algorithm of determining cycle time for printed circuit board assembly lines," European Journal of Operational Research, Elsevier, vol. 128(1), pages 175-184, January.
    10. George Polak, 2005. "On A Special Case of the Quadratic Assignment Problem with an Application to Storage-and-Retrieval Devices," Annals of Operations Research, Springer, vol. 138(1), pages 223-233, September.
    11. Spieksma, F.C.R. & Crama, Y. & van de Klundert, J. & Flippo, O.E., 1995. "The component retrieval problem in printed circuit board assembly," Research Memorandum 027, Maastricht University, Maastricht Research School of Economics of Technology and Organization (METEOR).
    12. Kathrin Klamroth & Margaret M. Wiecek, 2002. "A Bi-Objective Median Location Problem With a Line Barrier," Operations Research, INFORMS, vol. 50(4), pages 670-679, August.
    13. George J. Kyparisis & Christos Koulamas, 2002. "Assembly-Line Scheduling with Concurrent Operations and Parallel Machines," INFORMS Journal on Computing, INFORMS, vol. 14(1), pages 68-80, February.
    14. Anantaram Balakrishnan & François Vanderbeck, 1999. "A Tactical Planning Model for Mixed-Model Electronics Assembly Operations," Operations Research, INFORMS, vol. 47(3), pages 395-409, June.
    15. Spieksma, F.C.R. & Crama, Y. & van de Klundert, J. & Flippo, O.E., 1995. "The assembly of printed circuit boards: a case with multiple machines and multiple board types," Research Memorandum 023, Maastricht University, Maastricht Research School of Economics of Technology and Organization (METEOR).
    16. Ronald G. Askin & Moshe Dror & Asoo J. Vakharia, 1994. "Printed circuit board family grouping and component allocation for a multimachine, open‐shop assembly cell," Naval Research Logistics (NRL), John Wiley & Sons, vol. 41(5), pages 587-608, August.
    17. Charles Bordenave & Michel Gendreau & Gilbert Laporte, 2009. "A branch‐and‐cut algorithm for the nonpreemptive swapping problem," Naval Research Logistics (NRL), John Wiley & Sons, vol. 56(5), pages 478-486, August.
    18. Oğuz, Murat & Bektaş, Tolga & Bennell, Julia A., 2018. "Multicommodity flows and Benders decomposition for restricted continuous location problems," European Journal of Operational Research, Elsevier, vol. 266(3), pages 851-863.
    19. Van Hop, Nguyen & Nagarur, Nagendra N., 2004. "The scheduling problem of PCBs for multiple non-identical parallel machines," European Journal of Operational Research, Elsevier, vol. 158(3), pages 577-594, November.
    20. H. W. Hamacher & S. Nickel, 1995. "Restricted planar location problems and applications," Naval Research Logistics (NRL), John Wiley & Sons, vol. 42(6), pages 967-992, September.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:pal:jorsoc:v:58:y:2007:i:3:d:10.1057_palgrave.jors.2602152. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sonal Shukla or Springer Nature Abstracting and Indexing (email available below). General contact details of provider: http://www.palgrave-journals.com/ .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.