IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v15y2023i11p8561-d1155215.html
   My bibliography  Save this article

Investigation of Effect of Nozzle Numbers on Diesel Engine Performance Operated at Plateau Environment

Author

Listed:
  • Zhipeng Li

    (School of Mechanical Engineering, Beijing Institute of Technology, Zhongguancun Campus, Beijing 100072, China
    China North Engine Research Institute, Tianjin 300400, China)

  • Qiang Zhang

    (School of Mechanical Engineering, Beijing Institute of Technology, Zhongguancun Campus, Beijing 100072, China
    China North Engine Research Institute, Tianjin 300400, China)

  • Fujun Zhang

    (School of Mechanical Engineering, Beijing Institute of Technology, Zhongguancun Campus, Beijing 100072, China)

  • Hongbo Liang

    (China North Engine Research Institute, Tianjin 300400, China)

  • Yu Zhang

    (Department of Mechanical Engineering, Hangzhou City University, Hangzhou 310015, China)

Abstract

The effect of nozzle number on the combustion and emission characteristics of diesel engines operating at high altitudes was investigated in this study. A three-dimensional computational fluid dynamics model was developed to simulate the spray spatial distribution, which is closely related to the nozzle number. The intake pressure was identified as the dominant factor under varying altitudes, while the fuel mass, injection timing and temperature were maintained constant. Altitudes of 3000 m were chosen to represent typical high-altitude conditions, and sea level cases were simulated for comparison. The results demonstrated that high-altitude operation reduced the air utility in the combustion chamber, leading to suppressed soot oxidization and worse soot emissions. Moreover, more injection nozzles will decrease the fuel injection pressure, resulting in inadequate fuel diffusion and detrimental effects on the combustion efficiency and soot control. However, too few nozzles may cause wall collisions and worsen the combustion conditions. The number of nozzles also influences the combustion, with a higher number of nozzles exacerbating poor combustion conditions. The optimal number of nozzles for the engine studied is determined to be six. Hence, determining the optimal nozzle number plays a vital role in achieving the optimal performance of highland diesel engines. This study provides valuable guidance for the development of diesel engines in high-altitude environments, where controlling the fuel consumption and soot emissions is challenging.

Suggested Citation

  • Zhipeng Li & Qiang Zhang & Fujun Zhang & Hongbo Liang & Yu Zhang, 2023. "Investigation of Effect of Nozzle Numbers on Diesel Engine Performance Operated at Plateau Environment," Sustainability, MDPI, vol. 15(11), pages 1-20, May.
    • Handle: RePEc:gam:jsusta:v:15:y:2023:i:11:p:8561-:d:1155215
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/15/11/8561/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/15/11/8561/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Zhang, Huiyan & Shi, Lei & Deng, Kangyao & Liu, Sheng & Yang, Zhenhuan, 2020. "Experiment investigation on the performance and regulation rule of two-stage turbocharged diesel engine for various altitudes operation," Energy, Elsevier, vol. 192(C).
    2. Wang, Xin & Ge, Yunshan & Yu, Linxiao & Feng, Xiangyu, 2013. "Effects of altitude on the thermal efficiency of a heavy-duty diesel engine," Energy, Elsevier, vol. 59(C), pages 543-548.
    3. Kan, Zechao & Hu, Zhiyuan & Lou, Diming & Tan, Piqiang & Cao, Zhiyi & Yang, Zhenhuan, 2018. "Effects of altitude on combustion and ignition characteristics of speed-up period during cold start in a diesel engine," Energy, Elsevier, vol. 150(C), pages 164-175.
    4. Zhao, Zhenfeng & Cui, Huasheng, 2022. "Numerical investigation on combustion processes of an aircraft piston engine fueled with aviation kerosene and gasoline," Energy, Elsevier, vol. 239(PD).
    5. Zhang, Chunhua & Li, Yangyang & Liu, Zhentao & Liu, Jinlong, 2022. "An investigation of the effect of plateau environment on the soot generation and oxidation in diesel engines," Energy, Elsevier, vol. 253(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Liu, Jinlong & Wang, Bosen & Meng, Zhongwei & Liu, Zhentao, 2023. "An examination of performance deterioration indicators of diesel engines on the plateau," Energy, Elsevier, vol. 262(PB).
    2. Lu, Kangbo & Qiu, Hongjian & Chen, Ziqiang & Shi, Lei & Deng, Kangyao, 2023. "Environmental adaptability method for improving the cold start performance of the diesel engine based on pilot injection strategy," Energy, Elsevier, vol. 281(C).
    3. Xiangting Wang & Haiqiao Wei & Jiaying Pan & Zhen Hu & Zeyuan Zheng & Mingzhang Pan, 2020. "Analysis of Diesel Knock for High-Altitude Heavy-Duty Engines Using Optical Rapid Compression Machines," Energies, MDPI, vol. 13(12), pages 1-14, June.
    4. Lu, Kangbo & Shi, Lei & Zhang, Huiyan & Chen, Ziqiang & Deng, Kangyao, 2023. "Theoretical and experimental study on performance improvement of diesel engines at different altitudes by adaptive regulation method of the two-stage turbocharging system," Energy, Elsevier, vol. 281(C).
    5. Serrano, José Ramón & Martín, Jaime & Piqueras, Pedro & Tabet, Roberto & Gómez, Javier, 2023. "Effect of natural and forced charge air humidity on the performance and emissions of a compression-ignition engine operating at high warm altitude," Energy, Elsevier, vol. 266(C).
    6. Chengguan Wang & Xiaozhi Qi & Tao Wang & Diming Lou & Piqiang Tan & Zhiyuan Hu & Liang Fang & Rong Yang, 2023. "Role of Altitude in Influencing the Spray Combustion Characteristics of a Heavy-Duty Diesel Engine in a Constant Volume Combustion Chamber. Part I: Free Diesel Jet," Energies, MDPI, vol. 16(12), pages 1-25, June.
    7. Yi Dong & Jianmin Liu & Yanbin Liu & Xinyong Qiao & Xiaoming Zhang & Ying Jin & Shaoliang Zhang & Tianqi Wang & Qi Kang, 2020. "A RBFNN & GACMOO-Based Working State Optimization Control Study on Heavy-Duty Diesel Engine Working in Plateau Environment," Energies, MDPI, vol. 13(1), pages 1-24, January.
    8. Reyes García-Contreras & Andrés Agudelo & Arántzazu Gómez & Pablo Fernández-Yáñez & Octavio Armas & Ángel Ramos, 2019. "Thermoelectric Energy Recovery in a Light-Duty Diesel Vehicle under Real-World Driving Conditions at Different Altitudes with Diesel, Biodiesel and GTL Fuels," Energies, MDPI, vol. 12(6), pages 1-18, March.
    9. Haiying Li & Xiaoqin Zhang & Chaofan Li & Rulou Cao & Weiqing Zhu & Yaozong Li & Fengchun Liu & Yufeng Li, 2022. "Numerical Study of Knocking Combustion in a Heavy-Duty Engine under Plateau Conditions," Energies, MDPI, vol. 15(9), pages 1-18, April.
    10. Xuewen Zhang & Xiang Huang & Peiyong Ni & Xiang Li, 2023. "Strategies to Reduce Emissions from Diesel Engines under Cold Start Conditions: A Review," Energies, MDPI, vol. 16(13), pages 1-21, July.
    11. Liang Fang & Diming Lou & Zhiyuan Hu & Piqiang Tan, 2019. "The Emission Characteristics of a Diesel Engine During Start-Up Process at Different Altitudes," Energies, MDPI, vol. 12(18), pages 1-15, September.
    12. Yuan, Chenheng & Peng, Shizhuo & Zhou, Lifu, 2023. "Multi-field coupling effect of injection on dynamics and thermodynamics of a linear combustion engine generator with slow compression and fast expansion," Energy, Elsevier, vol. 270(C).
    13. Leng, Ling & Qiu, Hongjian & Li, Xiannan & Zhong, Jie & Shi, Lei & Deng, Kangyao, 2022. "Effects on the transient energy distribution of turbocharging mode switching for marine diesel engines," Energy, Elsevier, vol. 249(C).
    14. Zhao, Deyang & An, Yanzhao & Pei, Yiqiang & Shi, Hao & Wang, Kun, 2023. "Numerical study on the asymmetrical jets formation from active pre-chamber under super-lean combustion conditions," Energy, Elsevier, vol. 262(PA).
    15. Rasa Zalakeviciute & Jesús López-Villada & Yves Rybarczyk, 2018. "Contrasted Effects of Relative Humidity and Precipitation on Urban PM 2.5 Pollution in High Elevation Urban Areas," Sustainability, MDPI, vol. 10(6), pages 1-21, June.
    16. Li, Yikai & Wang, Dongfang & Shi, Zhongjie & Chen, Haiyan & Liu, Fushui, 2021. "Environment-adaptive method to control intake preheating for diesel engines at cold-start conditions," Energy, Elsevier, vol. 227(C).
    17. Zhang, Chunhua & Li, Yangyang & Liu, Zhentao & Liu, Jinlong, 2022. "An investigation of the effect of plateau environment on the soot generation and oxidation in diesel engines," Energy, Elsevier, vol. 253(C).
    18. Zhao, Weihua & Yan, Junhao & Gao, Suya & Lee, Timothy H. & Li, Xiangrong, 2022. "The combustion and emission characteristics of a common-rail diesel engine fueled with diesel and higher alcohols blends with a high blend ratio," Energy, Elsevier, vol. 261(PB).
    19. Xu, Zheng & Ji, Fenzhu & Ding, Shuiting & Zhao, Yunhai & Zhang, Xiangbo & Zhou, Yu & Zhang, Qi & Du, Farong, 2020. "High-altitude performance and improvement methods of poppet valves 2-stroke aircraft diesel engine," Applied Energy, Elsevier, vol. 276(C).
    20. E, Jiaqiang & Liu, Guanlin & Zhang, Zhiqing & Han, Dandan & Chen, Jingwei & Wei, Kexiang & Gong, Jinke & Yin, Zibin, 2019. "Effect analysis on cold starting performance enhancement of a diesel engine fueled with biodiesel fuel based on an improved thermodynamic model," Applied Energy, Elsevier, vol. 243(C), pages 321-335.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:15:y:2023:i:11:p:8561-:d:1155215. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.