IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v15y2022i21p8170-d960805.html
   My bibliography  Save this article

A Novel Experimental Study on Conductivity Evaluation of Intersected Fractures

Author

Listed:
  • Haitao Wang

    (State Key Laboratory of Shale Oil and Gas Enrichment Mechanisms and Effective Development, Beijing 102206, China
    SINOPEC Research Institute of Petroleum Engineering Co., Ltd., Beijing 102206, China)

  • Chen Chen

    (State Key Laboratory of Shale Oil and Gas Enrichment Mechanisms and Effective Development, Beijing 102206, China
    SINOPEC Research Institute of Petroleum Engineering Co., Ltd., Beijing 102206, China)

  • Yiming Yao

    (State Key Laboratory of Shale Oil and Gas Enrichment Mechanisms and Effective Development, Beijing 102206, China
    SINOPEC Research Institute of Petroleum Engineering Co., Ltd., Beijing 102206, China)

  • Jingrui Zhao

    (CNPC Southwest Oil and Gas Field Company Shale Gas Research Institute, Chengdu 610051, China
    State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu 610500, China)

  • Qijun Zeng

    (State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu 610500, China)

  • Cong Lu

    (State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu 610500, China)

Abstract

Massive hydraulic fracturing (MHF) is currently the most effective technology used to create fracture networks with sufficient conductivity and maximize the stimulated reservoir volume (SRV) in tight oil and gas reservoirs. The newly initiated fracture networks during MHF usually exhibit complex fracture morphology and contain intersected fractures and fracture branches. The conductivity of these fractures plays a pivotal role in determining long-term productivity. Due to the complex geometry, it is difficult to accurately evaluate intersected fracture conductivity through traditional conductivity measurement methods and devices which are designed for a single primary fracture. Unlike previous studies where fracture conductivity was measured using two rock slabs under single-direction (vertical) loading, we establish a novel conductivity measurement apparatus that can mimic different fracture intersection scenarios under both vertical and transverse loading to facilitate the evaluation of intersected fracture conductivity. Based on this apparatus, a standard conductivity measurement framework for intersected fractures under biaxial compaction conditions is also proposed, and stable and reliable conductivity testing data are obtained. Sensitivity analyses are performed to find out the controlling factors of intersected fracture conductivity and the corresponding conductivity evolution law. Results indicate that the overall intersected fracture conductivity of intersected fractures can be divided into three stages, with closure pressure increasing, videlicet, the conductivity rapid reduction stage at low closure pressure, the conductivity slow reduction stage, and the conductivity stabilization stage. Higher proppant concentration results in higher conductivity. However, the conductivity differences among cases with different proppant concentration are relatively small at high closure pressure (conductivity stabilization stage). The more complex the fracture intersecting pattern is, the higher the conductivity would be. The experimental results can provide guidance for the design of proppant placement procedure for intersected fractures.

Suggested Citation

  • Haitao Wang & Chen Chen & Yiming Yao & Jingrui Zhao & Qijun Zeng & Cong Lu, 2022. "A Novel Experimental Study on Conductivity Evaluation of Intersected Fractures," Energies, MDPI, vol. 15(21), pages 1-14, November.
  • Handle: RePEc:gam:jeners:v:15:y:2022:i:21:p:8170-:d:960805
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/15/21/8170/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/15/21/8170/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Gao, Qi & Han, Songcai & Cheng, Yuanfang & Shi, Xian & Yan, Chuanliang & Han, Zhongying, 2022. "Flow-coupled-geomechanical modelling of CO2 transport in depleted shale from a microscopic perspective," Energy, Elsevier, vol. 257(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Micheal, Marembo & Yu, Hao & Meng, SiWei & Xu, WenLong & Huang, HanWei & Huang, MengCheng & Zhang, HouLin & Liu, He & Wu, HengAn, 2023. "Gas production from shale reservoirs with bifurcating fractures: A modified quadruple-domain model coupling microseismic events," Energy, Elsevier, vol. 278(C).
    2. Wang, Yanwei & Dai, Zhenxue & Chen, Li & Shen, Xudong & Chen, Fangxuan & Soltanian, Mohamad Reza, 2023. "An integrated multi-scale model for CO2 transport and storage in shale reservoirs," Applied Energy, Elsevier, vol. 331(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:15:y:2022:i:21:p:8170-:d:960805. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.