Author
Listed:
- Bokai Wang
(Nanjing Institute of Agricultural Mechanization, Ministry of Agriculture and Rural Affairs, Nanjing 210014, China
Key Laboratory of Modern Agricultural Equipment, Ministry of Agriculture and Rural Affairs, Nanjing 210014, China)
- Fengwei Gu
(Nanjing Institute of Agricultural Mechanization, Ministry of Agriculture and Rural Affairs, Nanjing 210014, China
Key Laboratory of Modern Agricultural Equipment, Ministry of Agriculture and Rural Affairs, Nanjing 210014, China)
- Mingzhu Cao
(Nanjing Institute of Agricultural Mechanization, Ministry of Agriculture and Rural Affairs, Nanjing 210014, China
Key Laboratory of Modern Agricultural Equipment, Ministry of Agriculture and Rural Affairs, Nanjing 210014, China)
- Huanxiong Xie
(Nanjing Institute of Agricultural Mechanization, Ministry of Agriculture and Rural Affairs, Nanjing 210014, China
Key Laboratory of Modern Agricultural Equipment, Ministry of Agriculture and Rural Affairs, Nanjing 210014, China)
- Feng Wu
(Nanjing Institute of Agricultural Mechanization, Ministry of Agriculture and Rural Affairs, Nanjing 210014, China
Key Laboratory of Modern Agricultural Equipment, Ministry of Agriculture and Rural Affairs, Nanjing 210014, China)
- Baoliang Peng
(Nanjing Institute of Agricultural Mechanization, Ministry of Agriculture and Rural Affairs, Nanjing 210014, China
Key Laboratory of Modern Agricultural Equipment, Ministry of Agriculture and Rural Affairs, Nanjing 210014, China)
- Zhichao Hu
(Nanjing Institute of Agricultural Mechanization, Ministry of Agriculture and Rural Affairs, Nanjing 210014, China
Key Laboratory of Modern Agricultural Equipment, Ministry of Agriculture and Rural Affairs, Nanjing 210014, China)
Abstract
Aiming at the problems of high missed-pickup rate and crushed rate caused by different types of peanut harvester pickup drums, by tracking a field comparative experiment from 2020 to 2021, the missed-pickup rate, missed-pickup quality distribution, crushed rate and quality distribution rule of pods with different degrees of crushing observed in two peanut varieties with different pickup drums were studied. Three kinds of pod-pickup drums were set up: axial flow (T1), tangential flow (T2) and tangential–axial flow (T3), and they were installed on the pickup harvester to form three kinds of pickup and harvest test stands. At the same time, a control test stand (CK) without pod-pickup drums was set up. Peanut varieties “Shanhua 9” and “Huayu22” and 10 water content levels were used. Using Origin2018 software, the missed-pickup rate, missed-pickup quality distribution, crushed rate and the quality distribution of pods with different degrees of crushing were statistically analyzed for the two peanut varieties harvested by different pickup drums. The results showed that the average missed-pickup rate was T1, T2 and T3, in order from small to large. The order of pickup quality from more to less was small pods, medium pods and large pods, which indicated that small pods were more likely to be missed. The average pod crushed rates for T1, T2 and T3 for Shanhua 9 were 2.06%, 2.19% and 2.45%, and those of T1, T2 and T3 for Huayu22 were 1.74%, 1.91% and 2.23%, so the order of pod crushed rates from small to large was T1, T2 and T3. At the same time, the crushed rate of T1, T2 and T3 to the two varieties decreased obviously with the decrease in water content. After the T1 test, the proportion of medium and severely crushed pods was the least, followed by T2, and the highest was T3. At the same time, the higher the water content, the higher the proportion of medium and severely crushed pods, and the proportion of medium and severely crushed pods after the Huayu22 test was less than that of the Shanhua 9 test.
Suggested Citation
Bokai Wang & Fengwei Gu & Mingzhu Cao & Huanxiong Xie & Feng Wu & Baoliang Peng & Zhichao Hu, 2022.
"Analysis and Evaluation of the Influence of Different Drum Forms of Peanut Harvester on Pod-Pickup Quality,"
Agriculture, MDPI, vol. 12(6), pages 1-18, May.
Handle:
RePEc:gam:jagris:v:12:y:2022:i:6:p:769-:d:825910
Download full text from publisher
Citations
Citations are extracted by the
CitEc Project, subscribe to its
RSS feed for this item.
Cited by:
- Haiyang Shen & Hongguang Yang & Qimin Gao & Fengwei Gu & Zhichao Hu & Feng Wu & Youqing Chen & Mingzhu Cao, 2023.
"Experimental Research for Digging and Inverting of Upright Peanuts by Digger-Inverter,"
Agriculture, MDPI, vol. 13(4), pages 1-18, April.
- Dongjie Li & Shuqi Shang & Xiaoning He & Zhuang Zhao & Zengcun Chang & Yuetao Wang & Dongwei Wang, 2022.
"Experiments and Analysis of a Peanut Semi-Feeding Picking Mechanism Based on the JKR Model,"
Agriculture, MDPI, vol. 12(9), pages 1-20, September.
Most related items
These are the items that most often cite the same works as this one and are cited by the same works as this one.
- Jiannan Wang & Minji Liu & Huichang Wu & Jinyi Peng & Baoliang Peng & Yanshan Yang & Minzhu Cao & Hai Wei & Huanxiong Xie, 2022.
"Design and Key Parameter Optimization of Conic Roller Shelling Device Based on Walnut Moisture-Regulating Treatments,"
Agriculture, MDPI, vol. 12(4), pages 1-15, April.
- Bokai Wang & Feng Wu & Fengwei Gu & Hongchen Yang & Huichang Wu & Zhichao Hu, 2023.
"Experimental Analysis and Evaluation of Automatic Control System for Evenly Scattering Crushed Straw,"
Agriculture, MDPI, vol. 13(3), pages 1-15, March.
- Dongjie Li & Shuqi Shang & Xiaoning He & Zhuang Zhao & Zengcun Chang & Yuetao Wang & Dongwei Wang, 2022.
"Experiments and Analysis of a Peanut Semi-Feeding Picking Mechanism Based on the JKR Model,"
Agriculture, MDPI, vol. 12(9), pages 1-20, September.
Corrections
All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jagris:v:12:y:2022:i:6:p:769-:d:825910. See general information about how to correct material in RePEc.
If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.
If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .
If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .
Please note that corrections may take a couple of weeks to filter through
the various RePEc services.