IDEAS home Printed from https://ideas.repec.org/a/gam/jagris/v10y2020i4p123-d344464.html
   My bibliography  Save this article

The Concept of a Compact Profile Agricultural Tractor Suitable for Use on Specialised Tree Crops

Author

Listed:
  • Simone Pascuzzi

    (Department of Agricultural and Environmental Science, University of Bari Aldo Moro, Via Amendola 165/A, 70126 Bari, Italy)

  • Alexandros Sotirios Anifantis

    (Department of Agricultural and Environmental Science, University of Bari Aldo Moro, Via Amendola 165/A, 70126 Bari, Italy)

  • Francesco Santoro

    (Department of Agricultural and Environmental Science, University of Bari Aldo Moro, Via Amendola 165/A, 70126 Bari, Italy)

Abstract

This study firstly examined certain methods of vineyard management typically adopted in Apulia for both table grapes and wine grapes. In the later phenological stages, guyot or spurred cordon vineyards have extremely abundant vegetation, which drastically limits the space available between the rows for the passage of a tractor, even for a narrow-track vehicle. On the other hand, vegetation in tendone vineyards is situated at approximately 1.90 m above the soil surface, so that total tractor height must be compatible with this cultivation method. Foliage canopies in these types of vineyard cultivation system were evaluated at the times of their maximum growth in order to identify the maximum possible size of a prototype tractor that would be able to pass between vineyard rows without interfering in any way with the vegetation and fruits. Using the results of field measurements, it was established that the prototype tractor must have a maximum height of 1600 mm, with a minimum front axle track of less than 1100 mm and a back axle track of less than 1000 mm. A tractor built to these specifications is now being tested in order to compare its performance with that of other tractors commonly used in Apulia in various agricultural contexts.

Suggested Citation

  • Simone Pascuzzi & Alexandros Sotirios Anifantis & Francesco Santoro, 2020. "The Concept of a Compact Profile Agricultural Tractor Suitable for Use on Specialised Tree Crops," Agriculture, MDPI, vol. 10(4), pages 1-10, April.
  • Handle: RePEc:gam:jagris:v:10:y:2020:i:4:p:123-:d:344464
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2077-0472/10/4/123/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/2077-0472/10/4/123/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Volodymyr Bulgakov & Simone Pascuzzi & Volodymyr Nadykto & Semjons Ivanovs, 2018. "A Mathematical Model of the Plane-Parallel Movement of an Asymmetric Machine-and-Tractor Aggregate," Agriculture, MDPI, vol. 8(10), pages 1-15, October.
    2. Volodymyr Bulgakov & Simone Pascuzzi & Alexandros Sotirios Anifantis & Francesco Santoro, 2019. "Oscillations Analysis of Front-Mounted Beet Topper Machine for Biomass Harvesting," Energies, MDPI, vol. 12(14), pages 1-14, July.
    3. Emanuele Cerruto & Giuseppe Manetto & Francesco Santoro & Simone Pascuzzi, 2018. "Operator Dermal Exposure to Pesticides in Tomato and Strawberry Greenhouses from Hand-Held Sprayers," Sustainability, MDPI, vol. 10(7), pages 1-21, July.
    4. Alexandros Sotirios Anifantis & Salvatore Camposeo & Gaetano Alessandro Vivaldi & Francesco Santoro & Simone Pascuzzi, 2019. "Comparison of UAV Photogrammetry and 3D Modeling Techniques with Other Currently Used Methods for Estimation of the Tree Row Volume of a Super-High-Density Olive Orchard," Agriculture, MDPI, vol. 9(11), pages 1-14, October.
    5. Volodymyr Bulgakov & Simone Pascuzzi & Hristo Beloev & Semjons Ivanovs, 2019. "Theoretical Investigations of the Headland Turning Agility of a Trailed Asymmetric Implement-and-Tractor Aggregate," Agriculture, MDPI, vol. 9(10), pages 1-11, October.
    6. Simone Pascuzzi & Francesco Santoro, 2017. "Analysis of the Almond Harvesting and Hulling Mechanization Process: A Case Study," Agriculture, MDPI, vol. 7(12), pages 1-9, December.
    7. Volodymyr Bulgakov & Simone Pascuzzi & Francesco Santoro & Alexandros Sotirios Anifantis, 2018. "Mathematical Model of the Plane-Parallel Movement of the Self-Propelled Root-Harvesting Machine," Sustainability, MDPI, vol. 10(10), pages 1-11, October.
    8. Francesco Santoro & Alexandros Sotirios Anifantis & Giuseppe Ruggiero & Vladislav Zavadskiy & Simone Pascuzzi, 2019. "Lightning Protection Systems Suitable for Stables: A Case Study," Agriculture, MDPI, vol. 9(4), pages 1-7, April.
    9. Simone Pascuzzi, 2016. "Outcomes on the Spray Profiles Produced by the Feasible Adjustments of Commonly Used Sprayers in “Tendone” Vineyards of Apulia (Southern Italy)," Sustainability, MDPI, vol. 8(12), pages 1-18, December.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Volodymyr Bulgakov & Volodymyr Nadykto & Olga Orynycz & Simone Pascuzzi, 2022. "Reduction in Energy Consumption by Mitigation of Cultivation Resistance Due to the New Fallow Harrow Concept," Energies, MDPI, vol. 15(22), pages 1-12, November.
    2. Volodymyr Bulgakov & Simone Pascuzzi & Semjons Ivanovs & Francesco Santoro & Alexandros Sotirios Anifantis & Ievhen Ihnatiev, 2020. "Performance Assessment of Front-Mounted Beet Topper Machine for Biomass Harvesting," Energies, MDPI, vol. 13(14), pages 1-12, July.
    3. Simone Pascuzzi & Volodymyr Bulgakov & Francesco Santoro & Alexandros Sotirios Anifantis & Semjons Ivanovs & Ivan Holovach, 2020. "A Study on the Drift of Spray Droplets Dipped in Airflows with Different Directions," Sustainability, MDPI, vol. 12(11), pages 1-15, June.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Volodymyr Bulgakov & Simone Pascuzzi & Semjons Ivanovs & Francesco Santoro & Alexandros Sotirios Anifantis & Ievhen Ihnatiev, 2020. "Performance Assessment of Front-Mounted Beet Topper Machine for Biomass Harvesting," Energies, MDPI, vol. 13(14), pages 1-12, July.
    2. Simone Pascuzzi & Volodymyr Bulgakov & Francesco Santoro & Alexandros Sotirios Anifantis & Semjons Ivanovs & Ivan Holovach, 2020. "A Study on the Drift of Spray Droplets Dipped in Airflows with Different Directions," Sustainability, MDPI, vol. 12(11), pages 1-15, June.
    3. Volodymyr Bulgakov & Simone Pascuzzi & Semjons Ivanovs & Zinoviy Ruzhylo & Ivan Fedosiy & Francesco Santoro, 2020. "A New Spiral Potato Cleaner to Enhance the Removal of Impurities and Soil Clods in Potato Harvesting," Sustainability, MDPI, vol. 12(23), pages 1-19, November.
    4. Artur Przywara & Francesco Santoro & Artur Kraszkiewicz & Anna Pecyna & Simone Pascuzzi, 2020. "Experimental Study of Disc Fertilizer Spreader Performance," Agriculture, MDPI, vol. 10(10), pages 1-11, October.
    5. Sara Rajabi Hamedani & Mauro Villarini & Andrea Colantoni & Maurizio Carlini & Massimo Cecchini & Francesco Santoro & Antonio Pantaleo, 2020. "Environmental and Economic Analysis of an Anaerobic Co-Digestion Power Plant Integrated with a Compost Plant," Energies, MDPI, vol. 13(11), pages 1-14, May.
    6. Volodymyr Bulgakov & Simone Pascuzzi & Alexandros Sotirios Anifantis & Francesco Santoro, 2019. "Oscillations Analysis of Front-Mounted Beet Topper Machine for Biomass Harvesting," Energies, MDPI, vol. 12(14), pages 1-14, July.
    7. Artur Kraszkiewicz & Artur Przywara & Alexandros Sotirios Anifantis, 2020. "Impact of Ignition Technique on Pollutants Emission during the Combustion of Selected Solid Biofuels," Energies, MDPI, vol. 13(10), pages 1-13, May.
    8. Volodymyr Bulgakov & Simone Pascuzzi & Valerii Adamchuk & Volodymyr Kuvachov & Ladislav Nozdrovicky, 2019. "Theoretical Study of Transverse Offsets of Wide Span Tractor Working Implements and Their Influence on Damage to Row Crops," Agriculture, MDPI, vol. 9(7), pages 1-10, July.
    9. Marek Boryga & Paweł Kołodziej & Krzysztof Gołacki, 2020. "Application of Polynomial Transition Curves for Trajectory Planning on the Headlands," Agriculture, MDPI, vol. 10(5), pages 1-16, May.
    10. Francesco Santoro & Alexandros Sotirios Anifantis & Giuseppe Ruggiero & Vladislav Zavadskiy & Simone Pascuzzi, 2019. "Lightning Protection Systems Suitable for Stables: A Case Study," Agriculture, MDPI, vol. 9(4), pages 1-7, April.
    11. Antonio Pantaleo & Mauro Villarini & Andrea Colantoni & Maurizio Carlini & Francesco Santoro & Sara Rajabi Hamedani, 2020. "Techno-Economic Modeling of Biomass Pellet Routes: Feasibility in Italy," Energies, MDPI, vol. 13(7), pages 1-15, April.
    12. Arrigo Salvatore Guerrieri & Alexandros Sotirios Anifantis & Francesco Santoro & Simone Pascuzzi, 2019. "Study of a Large Square Baler with Innovative Technological Systems that Optimize the Baling Effectiveness," Agriculture, MDPI, vol. 9(5), pages 1-8, April.
    13. Volodymyr Bulgakov & Simone Pascuzzi & Hristo Beloev & Semjons Ivanovs, 2019. "Theoretical Investigations of the Headland Turning Agility of a Trailed Asymmetric Implement-and-Tractor Aggregate," Agriculture, MDPI, vol. 9(10), pages 1-11, October.
    14. Gabriel G. R. de Castro & Guido S. Berger & Alvaro Cantieri & Marco Teixeira & José Lima & Ana I. Pereira & Milena F. Pinto, 2023. "Adaptive Path Planning for Fusing Rapidly Exploring Random Trees and Deep Reinforcement Learning in an Agriculture Dynamic Environment UAVs," Agriculture, MDPI, vol. 13(2), pages 1-25, January.
    15. Daniel Queirós da Silva & André Silva Aguiar & Filipe Neves dos Santos & Armando Jorge Sousa & Danilo Rabino & Marcella Biddoccu & Giorgia Bagagiolo & Marco Delmastro, 2021. "Measuring Canopy Geometric Structure Using Optical Sensors Mounted on Terrestrial Vehicles: A Case Study in Vineyards," Agriculture, MDPI, vol. 11(3), pages 1-19, March.
    16. Riccardo Lo Bianco & Primo Proietti & Luca Regni & Tiziano Caruso, 2021. "Planting Systems for Modern Olive Growing: Strengths and Weaknesses," Agriculture, MDPI, vol. 11(6), pages 1-18, May.
    17. Julián Sánchez-Hermosilla & Victor J. Rincón & Francisco C. Páez & José Pérez-Alonso & Ángel-Jesús Callejón-Ferre, 2021. "Evaluation of the Effect of Different Hand-Held Sprayer Types on a Greenhouse Pepper Crop," Agriculture, MDPI, vol. 11(6), pages 1-10, June.
    18. Shaoqing Xu & Yuru Feng & Leng Han & Xiangkai Ran & Yuan Zhong & Ye Jin & Jianli Song, 2023. "Evaluation of the Wind Field and Deposition Effect of a Novel Air-Assisted Strawberry Sprayer," Agriculture, MDPI, vol. 13(2), pages 1-14, January.
    19. Giuseppe Coppola & Michele Costantini & Luigi Orsi & Davide Facchinetti & Francesco Santoro & Domenico Pessina & Jacopo Bacenetti, 2020. "A Comparative Cost-Benefit Analysis of Conventional and Organic Hazelnuts Production Systems in Center Italy," Agriculture, MDPI, vol. 10(9), pages 1-16, September.
    20. Emanuele Cerruto & Giuseppe Manetto & Francesco Santoro & Simone Pascuzzi, 2018. "Operator Dermal Exposure to Pesticides in Tomato and Strawberry Greenhouses from Hand-Held Sprayers," Sustainability, MDPI, vol. 10(7), pages 1-21, July.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jagris:v:10:y:2020:i:4:p:123-:d:344464. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.