IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v233y2021ics0360544221014080.html
   My bibliography  Save this article

Diphenyl guanidine vulcanization accelerators enable sulfurized polyacrylonitrile cathode for high capacity and ether-compatible by fast kinetic

Author

Listed:
  • Wang, Yu
  • Zhang, Yunpeng
  • Shuai, Yi
  • Chen, Kanghua

Abstract

Sulfurized polyacrylonitrile (SPAN) cathode shows excellent electrochemical performance in carbonate electrolyte for lithium-sulfur batteries. However, the limited redox conversion rate of SPAN cathode in ether electrolyte would lead to high solubility of the intermediate polysulfide Li2Sn(n ≤ 4) and shuttling, resulting in a low performance of corresponding lithium-sulfur battery, even though ether-based electrolytes are more suitable in terms of Li metal anode. In addition, SPAN is comparatively lower sulfur loading (<50 wt%) reduced its value. Improving the sulfur loading and accelerate the redox conversion of SPAN to be compatible with ether electrolyte will be one of the most promising cathode of lithium-sulfur batteries. Here, we introduced a sulfurized polyacrylonitrile cathode (SPAN-DG) with high sulfur loading (52 wt%) and high conductivity prepared by diphenylguanidine as vulcanization accelerator into lithium-sulfur battery based on ether electrolyte. This study found that SPAN-DG cathode with high conductivity can fast reaction kinetics and successfully inhibit the dissolution of lithium polysulfide and shuttle in ether electrolytes, shows good electrochemical performance. SPAN-DG cathode deliver a specific capacity of 879 mAh g−1 and 661 mAh g−1 (based on the mass of cathode) at rates of 0.1C and 1C (1C = 700 mA g−1), respectively.

Suggested Citation

  • Wang, Yu & Zhang, Yunpeng & Shuai, Yi & Chen, Kanghua, 2021. "Diphenyl guanidine vulcanization accelerators enable sulfurized polyacrylonitrile cathode for high capacity and ether-compatible by fast kinetic," Energy, Elsevier, vol. 233(C).
  • Handle: RePEc:eee:energy:v:233:y:2021:i:c:s0360544221014080
    DOI: 10.1016/j.energy.2021.121160
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544221014080
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2021.121160?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Xin Chen & Linfeng Peng & Lihui Wang & Jiaqiang Yang & Zhangxiang Hao & Jingwei Xiang & Kai Yuan & Yunhui Huang & Bin Shan & Lixia Yuan & Jia Xie, 2019. "Ether-compatible sulfurized polyacrylonitrile cathode with excellent performance enabled by fast kinetics via selenium doping," Nature Communications, Nature, vol. 10(1), pages 1-9, December.
    2. Sheng S. Zhang, 2014. "Understanding of Sulfurized Polyacrylonitrile for Superior Performance Lithium/Sulfur Battery," Energies, MDPI, vol. 7(7), pages 1-13, July.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Siwu Li & Haolin Zhu & Yuan Liu & Zhilong Han & Linfeng Peng & Shuping Li & Chuang Yu & Shijie Cheng & Jia Xie, 2022. "Codoped porous carbon nanofibres as a potassium metal host for nonaqueous K-ion batteries," Nature Communications, Nature, vol. 13(1), pages 1-13, December.
    2. Mazen Alshaaer & Abdulaziz O. S. Alanazi & Ibrahim M. I. Absa, 2023. "Use of Sulfur Waste in the Production of Metakaolin-Based Geopolymers," Sustainability, MDPI, vol. 15(18), pages 1-14, September.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:233:y:2021:i:c:s0360544221014080. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.