IDEAS home Printed from https://ideas.repec.org/a/spr/joinma/v30y2019i4d10.1007_s10845-017-1341-3.html
   My bibliography  Save this article

Prediction of mechanical stress in roller leveler based on vibration measurements and steel strip properties

Author

Listed:
  • Riku-Pekka Nikula

    (University of Oulu)

  • Konsta Karioja

    (University of Oulu)

  • Kauko Leiviskä

    (University of Oulu)

  • Esko Juuso

    (University of Oulu)

Abstract

The continuous development of steel products generates new challenges for the maintenance of manufacturing machines in steel mills. Substantial mechanical stress is inflicted on the machines during the processing of modern high-strength steels. This increases the risks of damage and flaws in the processed material may appear if the capability of a machine is exceeded. Therefore, new approaches are needed to prevent the machine condition from deteriorating. This study introduces an approach to the prediction of mechanical stress inflicted on a roller leveler during the processing of cold steel strips. The relative stress level is indicated by features extracted from an acceleration signal. These features are based on the calculation of generalized norms. Steel strip properties are used as explanatory variables in regression models to predict values for the extracted vibration features. The models tested in this study include multiple linear regression, partial least squares regression and generalized regression neural network. The models were tested using an extensive data set from a roller leveler that is in continuous operation in a steel mill. The prediction accuracy of the best models identified indicates that the relative stress level inflicted by each steel strip could be predicted based on its properties.

Suggested Citation

  • Riku-Pekka Nikula & Konsta Karioja & Kauko Leiviskä & Esko Juuso, 2019. "Prediction of mechanical stress in roller leveler based on vibration measurements and steel strip properties," Journal of Intelligent Manufacturing, Springer, vol. 30(4), pages 1563-1579, April.
    • Handle: RePEc:spr:joinma:v:30:y:2019:i:4:d:10.1007_s10845-017-1341-3
    DOI: 10.1007/s10845-017-1341-3
    as

    Download full text from publisher

    File URL: http://link.springer.com/10.1007/s10845-017-1341-3
    File Function: Abstract
    Download Restriction: Access to the full text of the articles in this series is restricted.
    File URL: https://libkey.io/10.1007/s10845-017-1341-3?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. A. Mosallam & K. Medjaher & N. Zerhouni, 2016. "Data-driven prognostic method based on Bayesian approaches for direct remaining useful life prediction," Journal of Intelligent Manufacturing, Springer, vol. 27(5), pages 1037-1048, October.
    2. Son, Junbo & Zhou, Shiyu & Sankavaram, Chaitanya & Du, Xinyu & Zhang, Yilu, 2016. "Remaining useful life prediction based on noisy condition monitoring signals using constrained Kalman filter," Reliability Engineering and System Safety, Elsevier, vol. 152(C), pages 38-50.
    3. W Wang, 2007. "A prognosis model for wear prediction based on oil-based monitoring," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 58(7), pages 887-893, July.
    4. Michael Baumgart & Andreas Steinboeck & Thomas Kiefer & Andreas Kugi, 2015. "Modelling and experimental validation of the deflection of a leveller for hot heavy plates," Mathematical and Computer Modelling of Dynamical Systems, Taylor & Francis Journals, vol. 21(3), pages 202-227, May.
    5. Ahmed Ragab & Mohamed-Salah Ouali & Soumaya Yacout & Hany Osman, 2016. "Remaining useful life prediction using prognostic methodology based on logical analysis of data and Kaplan–Meier estimation," Journal of Intelligent Manufacturing, Springer, vol. 27(5), pages 943-958, October.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Christopher Hagedorn & Johannes Huegle & Rainer Schlosser, 2022. "Understanding unforeseen production downtimes in manufacturing processes using log data-driven causal reasoning," Journal of Intelligent Manufacturing, Springer, vol. 33(7), pages 2027-2043, October.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Hemir da Cunha Santiago & José Carlos da Silva Cavalcanti & Ricardo Bastos Cavalcante Prudêncio & Mohamed A. Mohamed & Leonie Asfora Sarubbo & Attilio Converti & Manoel Henrique da Nóbrega Marinho, 2023. "A Novel Remaining Useful Estimation Model to Assist Asset Renewal Decisions Applied to the Brazilian Electric Sector," Energies, MDPI, vol. 16(6), pages 1-24, March.
    2. Gerardo Emanuel Granados & Loïc Lacroix & Kamal Medjaher, 2020. "Condition monitoring and prediction of solution quality during a copper electroplating process," Journal of Intelligent Manufacturing, Springer, vol. 31(2), pages 285-300, February.
    3. Mohamed Elhefnawy & Ahmed Ragab & Mohamed-Salah Ouali, 2023. "Polygon generation and video-to-video translation for time-series prediction," Journal of Intelligent Manufacturing, Springer, vol. 34(1), pages 261-279, January.
    4. Marcin Witczak & Marcin Mrugalski & Bogdan Lipiec, 2021. "Remaining Useful Life Prediction of MOSFETs via the Takagi–Sugeno Framework," Energies, MDPI, vol. 14(8), pages 1-23, April.
    5. Jie Yang & Shaowen Lu & Liangyong Wang, 2020. "Fused magnesia manufacturing process: a survey," Journal of Intelligent Manufacturing, Springer, vol. 31(2), pages 327-350, February.
    6. David Vališ & Libor Žák & Ondřej Pokora, 2015. "Contribution to system failure occurrence prediction and to system remaining useful life estimation based on oil field data," Journal of Risk and Reliability, , vol. 229(1), pages 36-45, February.
    7. Jahani, Salman & Zhou, Shiyu & Veeramani, Dharmaraj, 2021. "Stochastic prognostics under multiple time-varying environmental factors," Reliability Engineering and System Safety, Elsevier, vol. 215(C).
    8. Guo, Cui & Ryoo, Hong Seo, 2021. "On Pareto-Optimal Boolean Logical Patterns for Numerical Data," Applied Mathematics and Computation, Elsevier, vol. 403(C).
    9. Merainani, Boualem & Laddada, Sofiane & Bechhoefer, Eric & Chikh, Mohamed Abdessamed Ait & Benazzouz, Djamel, 2022. "An integrated methodology for estimating the remaining useful life of high-speed wind turbine shaft bearings with limited samples," Renewable Energy, Elsevier, vol. 182(C), pages 1141-1151.
    10. Liu, Xingheng & Matias, José & Jäschke, Johannes & Vatn, Jørn, 2022. "Gibbs sampler for noisy Transformed Gamma process: Inference and remaining useful life estimation," Reliability Engineering and System Safety, Elsevier, vol. 217(C).
    11. Muhammad Umair Ali & Amad Zafar & Sarvar Hussain Nengroo & Sadam Hussain & Gwan-Soo Park & Hee-Je Kim, 2019. "Online Remaining Useful Life Prediction for Lithium-Ion Batteries Using Partial Discharge Data Features," Energies, MDPI, vol. 12(22), pages 1-14, November.
    12. Zhou, Zhi-Jie & Hu, Chang-Hua & Xu, Dong-Ling & Chen, Mao-Yin & Zhou, Dong-Hua, 2010. "A model for real-time failure prognosis based on hidden Markov model and belief rule base," European Journal of Operational Research, Elsevier, vol. 207(1), pages 269-283, November.
    13. Hua-Xi Zhou & Chang-Guang Zhou & Hu-Tian Feng, 2023. "An integrated lifetime prediction method for double-nut ball screws subject to preload loss failure mode," Journal of Risk and Reliability, , vol. 237(6), pages 1248-1258, December.
    14. Pai Zheng & Xun Xu & Chun-Hsien Chen, 2020. "A data-driven cyber-physical approach for personalised smart, connected product co-development in a cloud-based environment," Journal of Intelligent Manufacturing, Springer, vol. 31(1), pages 3-18, January.
    15. Lyu, Zhiqiang & Wang, Geng & Gao, Renjing, 2022. "Synchronous state of health estimation and remaining useful lifetime prediction of Li-Ion battery through optimized relevance vector machine framework," Energy, Elsevier, vol. 251(C).
    16. Li, Mingxin & Jiang, Xiaoli & Carroll, James & Negenborn, Rudy R., 2022. "A multi-objective maintenance strategy optimization framework for offshore wind farms considering uncertainty," Applied Energy, Elsevier, vol. 321(C).
    17. Xiang Li & Wei Zhang & Qian Ding & Jian-Qiao Sun, 2020. "Intelligent rotating machinery fault diagnosis based on deep learning using data augmentation," Journal of Intelligent Manufacturing, Springer, vol. 31(2), pages 433-452, February.
    18. Thi-Tinh Le & Seok-Ju Lee & Minh-Chau Dinh & Minwon Park, 2023. "Design of an Improved Remaining Useful Life Prediction Model Based on Vibration Signals of Wind Turbine Rotating Components," Energies, MDPI, vol. 17(1), pages 1-18, December.
    19. Nguyen, Khanh T.P. & Medjaher, Kamal, 2019. "A new dynamic predictive maintenance framework using deep learning for failure prognostics," Reliability Engineering and System Safety, Elsevier, vol. 188(C), pages 251-262.
    20. Kedong Yan & Hong Seo Ryoo, 2022. "Graph, clique and facet of boolean logical polytope," Journal of Global Optimization, Springer, vol. 82(4), pages 1015-1052, April.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:spr:joinma:v:30:y:2019:i:4:d:10.1007_s10845-017-1341-3. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sonal Shukla or Springer Nature Abstracting and Indexing (email available below). General contact details of provider: http://www.springer.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.