IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v10y2018i12p4779-d190588.html
   My bibliography  Save this article

Enhancing Sustainability and Energy Efficiency in Smart Factories: A Review

Author

Listed:
  • Yuquan Meng

    (Department of Mechanical Science and Engineering, University of Illinois at Urbana-Champaign, Urbana, IL 61801, USA)

  • Yuhang Yang

    (Department of Mechanical Science and Engineering, University of Illinois at Urbana-Champaign, Urbana, IL 61801, USA)

  • Haseung Chung

    (Department of Mechanical Engineering, Michigan State University, East Lansing, MI 48824, USA)

  • Pil-Ho Lee

    (Department of Mechanical Engineering, Michigan State University, East Lansing, MI 48824, USA)

  • Chenhui Shao

    (Department of Mechanical Science and Engineering, University of Illinois at Urbana-Champaign, Urbana, IL 61801, USA)

Abstract

With the rapid development of sensing, communication, computing technologies, and analytics techniques, today’s manufacturing is marching towards a new generation of sustainability, digitalization, and intelligence. Even though the significance of both sustainability and intelligence is well recognized by academia, industry, as well as governments, and substantial efforts are devoted to both areas, the intersection of the two has not been fully exploited. Conventionally, studies in sustainable manufacturing and smart manufacturing have different objectives and employ different tools. Nevertheless, in the design and implementation of smart factories, sustainability, and energy efficiency are supposed to be important goals. Moreover, big data based decision-making techniques that are developed and applied for smart manufacturing have great potential in promoting the sustainability of manufacturing. In this paper, the state-of-the-art of sustainable and smart manufacturing is first reviewed based on the PRISMA framework, with a focus on how they interact and benefit each other. Key problems in both fields are then identified and discussed. Specially, different technologies emerging in the 4th industrial revolution and their dedications on sustainability are discussed. In addition, the impacts of smart manufacturing technologies on sustainable energy industry are analyzed. Finally, opportunities and challenges in the intersection of the two are identified for future investigation. The scope examined in this paper will be interesting to researchers, engineers, business owners, and policymakers in the manufacturing community, and could serve as a fundamental guideline for future studies in these areas.

Suggested Citation

  • Yuquan Meng & Yuhang Yang & Haseung Chung & Pil-Ho Lee & Chenhui Shao, 2018. "Enhancing Sustainability and Energy Efficiency in Smart Factories: A Review," Sustainability, MDPI, vol. 10(12), pages 1-28, December.
    • Handle: RePEc:gam:jsusta:v:10:y:2018:i:12:p:4779-:d:190588
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/10/12/4779/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/10/12/4779/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Wahiba Yaïci & Michela Longo & Evgueniy Entchev & Federica Foiadelli, 2017. "Simulation Study on the Effect of Reduced Inputs of Artificial Neural Networks on the Predictive Performance of the Solar Energy System," Sustainability, MDPI, vol. 9(8), pages 1-14, August.
    2. Hsu, Lie-Fern & Kuo, Shyanjaw, 1995. "Design of optimal maintenance policies based on on-line sampling plans," European Journal of Operational Research, Elsevier, vol. 86(2), pages 345-357, October.
    3. Huiru Zhao & Nana Li, 2016. "Performance Evaluation for Sustainability of Strong Smart Grid by Using Stochastic AHP and Fuzzy TOPSIS Methods," Sustainability, MDPI, vol. 8(2), pages 1-22, January.
    4. Yongli Wang & Yujing Huang & Yudong Wang & Fang Li & Yuanyuan Zhang & Chunzheng Tian, 2018. "Operation Optimization in a Smart Micro-Grid in the Presence of Distributed Generation and Demand Response," Sustainability, MDPI, vol. 10(3), pages 1-25, March.
    5. May, Gökan & Barletta, Ilaria & Stahl, Bojan & Taisch, Marco, 2015. "Energy management in production: A novel method to develop key performance indicators for improving energy efficiency," Applied Energy, Elsevier, vol. 149(C), pages 46-61.
    6. Saumuy Suriano & Hui Wang & Chenhui Shao & S. Jack Hu & Praveen Sekhar, 2015. "Progressive measurement and monitoring for multi-resolution data in surface manufacturing considering spatial and cross correlations," IISE Transactions, Taylor & Francis Journals, vol. 47(10), pages 1033-1052, October.
    7. Ellabban, Omar & Abu-Rub, Haitham & Blaabjerg, Frede, 2014. "Renewable energy resources: Current status, future prospects and their enabling technology," Renewable and Sustainable Energy Reviews, Elsevier, vol. 39(C), pages 748-764.
    8. Luo, Xing & Wang, Jihong & Dooner, Mark & Clarke, Jonathan, 2015. "Overview of current development in electrical energy storage technologies and the application potential in power system operation," Applied Energy, Elsevier, vol. 137(C), pages 511-536.
    9. Simona-Vasilica Oprea & Adela Bâra & Adina Ileana Uță & Alexandru Pîrjan & George Căruțașu, 2018. "Analyses of Distributed Generation and Storage Effect on the Electricity Consumption Curve in the Smart Grid Context," Sustainability, MDPI, vol. 10(7), pages 1-25, July.
    10. Alessandro Liberati & Douglas G Altman & Jennifer Tetzlaff & Cynthia Mulrow & Peter C Gøtzsche & John P A Ioannidis & Mike Clarke & P J Devereaux & Jos Kleijnen & David Moher, 2009. "The PRISMA Statement for Reporting Systematic Reviews and Meta-Analyses of Studies That Evaluate Health Care Interventions: Explanation and Elaboration," PLOS Medicine, Public Library of Science, vol. 6(7), pages 1-28, July.
    11. Han, Nuomin & Zhao, Dan & Schluter, Jorg U. & Goh, Ernest Seach & Zhao, He & Jin, Xiao, 2016. "Performance evaluation of 3D printed miniature electromagnetic energy harvesters driven by air flow," Applied Energy, Elsevier, vol. 178(C), pages 672-680.
    12. Hui Wang & Jianbo Sun & Weijun Wang, 2018. "Photovoltaic Power Forecasting Based on EEMD and a Variable-Weight Combination Forecasting Model," Sustainability, MDPI, vol. 10(8), pages 1-11, July.
    13. Haoran Zhao & Huiru Zhao & Sen Guo, 2018. "Short-Term Wind Electric Power Forecasting Using a Novel Multi-Stage Intelligent Algorithm," Sustainability, MDPI, vol. 10(3), pages 1-19, March.
    14. Amy H. I. Lee & He-Yau Kang & You-Jyun Liou, 2017. "A Hybrid Multiple-Criteria Decision-Making Approach for Photovoltaic Solar Plant Location Selection," Sustainability, MDPI, vol. 9(2), pages 1-21, January.
    15. Lean Yu & Zebin Yang & Ling Tang, 2016. "A novel multistage deep belief network based extreme learning machine ensemble learning paradigm for credit risk assessment," Flexible Services and Manufacturing Journal, Springer, vol. 28(4), pages 576-592, December.
    16. Acharya, Nirmal & Kim, Chang-Gu & Thapa, Bhola & Lee, Young-Ho, 2015. "Numerical analysis and performance enhancement of a cross-flow hydro turbine," Renewable Energy, Elsevier, vol. 80(C), pages 819-826.
    17. Fischer, Gunter Reinald & Kipouros, Timoleon & Savill, Anthony Mark, 2014. "Multi-objective optimisation of horizontal axis wind turbine structure and energy production using aerofoil and blade properties as design variables," Renewable Energy, Elsevier, vol. 62(C), pages 506-515.
    18. Doucoure, Boubacar & Agbossou, Kodjo & Cardenas, Alben, 2016. "Time series prediction using artificial wavelet neural network and multi-resolution analysis: Application to wind speed data," Renewable Energy, Elsevier, vol. 92(C), pages 202-211.
    19. Pourrajabian, Abolfazl & Nazmi Afshar, Peyman Amir & Ahmadizadeh, Mehdi & Wood, David, 2016. "Aero-structural design and optimization of a small wind turbine blade," Renewable Energy, Elsevier, vol. 87(P2), pages 837-848.
    20. Hu, Qinghua & Zhang, Rujia & Zhou, Yucan, 2016. "Transfer learning for short-term wind speed prediction with deep neural networks," Renewable Energy, Elsevier, vol. 85(C), pages 83-95.
    21. Seok-Keun Yoo & Bo-Young Kim, 2018. "A Decision-Making Model for Adopting a Cloud Computing System," Sustainability, MDPI, vol. 10(8), pages 1-15, August.
    22. Gebler, Malte & Schoot Uiterkamp, Anton J.M. & Visser, Cindy, 2014. "A global sustainability perspective on 3D printing technologies," Energy Policy, Elsevier, vol. 74(C), pages 158-167.
    23. Weller, Christian & Kleer, Robin & Piller, Frank T., 2015. "Economic implications of 3D printing: Market structure models in light of additive manufacturing revisited," International Journal of Production Economics, Elsevier, vol. 164(C), pages 43-56.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Caiado, Rodrigo Goyannes Gusmão & Scavarda, Luiz Felipe & Gavião, Luiz Octávio & Ivson, Paulo & Nascimento, Daniel Luiz de Mattos & Garza-Reyes, Jose Arturo, 2021. "A fuzzy rule-based industry 4.0 maturity model for operations and supply chain management," International Journal of Production Economics, Elsevier, vol. 231(C).
    2. Jonghyuk Kim & Hyunwoo Hwangbo, 2019. "Real-Time Early Warning System for Sustainable and Intelligent Plastic Film Manufacturing," Sustainability, MDPI, vol. 11(5), pages 1-13, March.
    3. Min Dai & Ziwei Zhang & Adriana Giret & Miguel A. Salido, 2019. "An Enhanced Estimation of Distribution Algorithm for Energy-Efficient Job-Shop Scheduling Problems with Transportation Constraints," Sustainability, MDPI, vol. 11(11), pages 1-23, May.
    4. Polinpapilinho F. Katina & Casey T. Cash & Logan R. Caldwell & Chrystopher M. Beck & James J. Katina, 2023. "Advanced Manufacturing Management: A Systematic Literature Review," Sustainability, MDPI, vol. 15(6), pages 1-14, March.
    5. Mohammad Zaher Serdar & Sami G. Al-Ghamdi, 2021. "Resiliency Assessment of Road Networks during Mega Sport Events: The Case of FIFA World Cup Qatar 2022," Sustainability, MDPI, vol. 13(22), pages 1-15, November.
    6. Yousef Alhumaid & Khalid Khan & Fahad Alismail & Muhammad Khalid, 2021. "Multi-Input Nonlinear Programming Based Deterministic Optimization Framework for Evaluating Microgrids with Optimal Renewable-Storage Energy Mix," Sustainability, MDPI, vol. 13(11), pages 1-15, May.
    7. Rafael Ninno Muniz & Carlos Tavares da Costa Júnior & William Gouvêa Buratto & Ademir Nied & Gabriel Villarrubia González, 2023. "The Sustainability Concept: A Review Focusing on Energy," Sustainability, MDPI, vol. 15(19), pages 1-22, September.
    8. Hawon Chu & Jaeseong Kim & Seounghyeon Kim & Young-Kyoon Suh & Ryong Lee & Rae-Young Jang & Minwoo Park, 2020. "ST-Trie: A Novel Indexing Scheme for Efficiently Querying Heterogeneous, Spatiotemporal IoT Data," Sustainability, MDPI, vol. 12(22), pages 1-21, November.
    9. Héctor Cañas & Josefa Mula & Francisco Campuzano-Bolarín, 2020. "A General Outline of a Sustainable Supply Chain 4.0," Sustainability, MDPI, vol. 12(19), pages 1-17, September.
    10. Teckshawer Tom, 2023. "5G Impacts, Internet of Things (IoT) and Businesses in Developing Countries," Technium Social Sciences Journal, Technium Science, vol. 46(1), pages 87-104, August.
    11. Mohamed Haddouche & Adrian Ilinca, 2022. "Energy Efficiency and Industry 4.0 in Wood Industry: A Review and Comparison to Other Industries," Energies, MDPI, vol. 15(7), pages 1-25, March.
    12. Hsiao-Yen Mao & Wen-Min Lu & Hsin-Yen Shieh, 2023. "Exploring the Influence of Environmental Investment on Multinational Enterprises’ Performance from the Sustainability and Marketability Efficiency Perspectives," Sustainability, MDPI, vol. 15(10), pages 1-23, May.
    13. Saqib Ali & Habib Ullah & Minhas Akbar & Waheed Akhtar & Hasan Zahid, 2019. "Determinants of Consumer Intentions to Purchase Energy-Saving Household Products in Pakistan," Sustainability, MDPI, vol. 11(5), pages 1-20, March.
    14. Lulu Xin & Shuai Lang & Arunodaya Raj Mishra, 2022. "RETRACTED ARTICLE: Evaluate the challenges of sustainable supply chain 4.0 implementation under the circular economy concept using new decision making approach," Operations Management Research, Springer, vol. 15(3), pages 773-792, December.
    15. Senthil Sundaramoorthy & Dipti Kamath & Sachin Nimbalkar & Christopher Price & Thomas Wenning & Joseph Cresko, 2023. "Energy Efficiency as a Foundational Technology Pillar for Industrial Decarbonization," Sustainability, MDPI, vol. 15(12), pages 1-24, June.
    16. Shuanglian Chen & Gaoke Liao & Benjamin M. Drakeford & Pierre Failler, 2019. "The Non-Linear Effect of Financial Support on Energy Efficiency: Evidence from China," Sustainability, MDPI, vol. 11(7), pages 1-16, April.
    17. Ilija Djekic & Laura Batlle-Bayer & Alba Bala & Pere Fullana-i-Palmer & Anet Režek Jambrak, 2021. "Role of the Food Supply Chain Stakeholders in Achieving UN SDGs," Sustainability, MDPI, vol. 13(16), pages 1-16, August.
    18. Cezar-Petre Simion & Cătălin-Alexandru Verdeș & Alexandra-Andreea Mironescu & Florin-Gabriel Anghel, 2023. "Digitalization in Energy Production, Distribution, and Consumption: A Systematic Literature Review," Energies, MDPI, vol. 16(4), pages 1-30, February.
    19. Waris, Idrees & Hameed, Irfan, 2019. "Using Extended Model of Theory of Planned Behavior to Predict Purchase Intention of Energy Efficient Home Appliances in Pakistan," MPRA Paper 109612, University Library of Munich, Germany.
    20. Krzysztof Kosowski & Karol Tucki & Marian Piwowarski & Robert Stępień & Olga Orynycz & Wojciech Włodarski, 2019. "Thermodynamic Cycle Concepts for High-Efficiency Power Plants. Part B: Prosumer and Distributed Power Industry," Sustainability, MDPI, vol. 11(9), pages 1-13, May.
    21. Athanasios C. (Thanos) Bourtsalas & Petros E. Papadatos & Kyriaki Kiskira & Konstantinos Kalkanis & Constantinos S. Psomopoulos, 2023. "Ecodesign for Industrial Furnaces and Ovens: A Review of the Current Environmental Legislation," Sustainability, MDPI, vol. 15(12), pages 1-13, June.
    22. Krzysztof Ejsmont & Bartlomiej Gladysz & Aldona Kluczek, 2020. "Impact of Industry 4.0 on Sustainability—Bibliometric Literature Review," Sustainability, MDPI, vol. 12(14), pages 1-29, July.
    23. José Salvador da Motta Reis & Maximilian Espuny & Thaís Vieira Nunhes & Nilo Antonio de Souza Sampaio & Raine Isaksson & Fernando Celso de Campos & Otávio José de Oliveira, 2021. "Striding towards Sustainability: A Framework to Overcome Challenges and Explore Opportunities through Industry 4.0," Sustainability, MDPI, vol. 13(9), pages 1-28, May.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Mojtaba Qolipour & Ali Mostafaeipour & Mohammad Saidi-Mehrabad & Hamid R Arabnia, 2019. "Prediction of wind speed using a new Grey-extreme learning machine hybrid algorithm: A case study," Energy & Environment, , vol. 30(1), pages 44-62, February.
    2. Mohammadreza Akbari & John L. Hopkins, 2022. "Digital technologies as enablers of supply chain sustainability in an emerging economy," Operations Management Research, Springer, vol. 15(3), pages 689-710, December.
    3. Hossein Moayedi & Amir Mosavi, 2021. "An Innovative Metaheuristic Strategy for Solar Energy Management through a Neural Networks Framework," Energies, MDPI, vol. 14(4), pages 1-18, February.
    4. Naghshineh, Bardia & Ribeiro, André & Jacinto, Celeste & Carvalho, Helena, 2021. "Social impacts of additive manufacturing: A stakeholder-driven framework," Technological Forecasting and Social Change, Elsevier, vol. 164(C).
    5. Birtchnell, Thomas & Böhme, Tillmann & Gorkin, Robert, 2017. "3D printing and the third mission: The university in the materialization of intellectual capital," Technological Forecasting and Social Change, Elsevier, vol. 123(C), pages 240-249.
    6. Efstathios E. Michaelides, 2021. "Thermodynamics, Energy Dissipation, and Figures of Merit of Energy Storage Systems—A Critical Review," Energies, MDPI, vol. 14(19), pages 1-41, September.
    7. Hasan Mahmud & Joyashree Roy, 2021. "Barriers to Overcome in Accelerating Renewable Energy Penetration in Bangladesh," Sustainability, MDPI, vol. 13(14), pages 1-28, July.
    8. Sun, Luoyi & Hua, Guowei & Cheng, T.C.E. & Wang, Yixiao, 2020. "How to price 3D-printed products? Pricing strategy for 3D printing platforms," International Journal of Production Economics, Elsevier, vol. 226(C).
    9. Chekurov, Sergei & Metsä-Kortelainen, Sini & Salmi, Mika & Roda, Irene & Jussila, Ari, 2018. "The perceived value of additively manufactured digital spare parts in industry: An empirical investigation," International Journal of Production Economics, Elsevier, vol. 205(C), pages 87-97.
    10. Gokan May & Foivos Psarommatis, 2023. "Maximizing Energy Efficiency in Additive Manufacturing: A Review and Framework for Future Research," Energies, MDPI, vol. 16(10), pages 1-28, May.
    11. Guo, Xinru & Zhang, Houcheng, 2020. "Performance analyses of a combined system consisting of high-temperature polymer electrolyte membrane fuel cells and thermally regenerative electrochemical cycles," Energy, Elsevier, vol. 193(C).
    12. Sun, Luoyi & Hua, Guowei & Cheng, T.C.E. & Teunter, Ruud H. & Dong, Jingxin & Wang, Yixiao, 2023. "Purchase or rent? Optimal pricing for 3D printing capacity sharing platforms," European Journal of Operational Research, Elsevier, vol. 307(3), pages 1192-1205.
    13. Mushafiq, Muhammad, 2023. "Towards green development: Role of researchers," Innovation and Green Development, Elsevier, vol. 2(4).
    14. Argyrou, Maria C. & Christodoulides, Paul & Kalogirou, Soteris A., 2018. "Energy storage for electricity generation and related processes: Technologies appraisal and grid scale applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 94(C), pages 804-821.
    15. Ganjehkaviri, A. & Mohd Jaafar, M.N. & Hosseini, S.E. & Barzegaravval, H., 2017. "Genetic algorithm for optimization of energy systems: Solution uniqueness, accuracy, Pareto convergence and dimension reduction," Energy, Elsevier, vol. 119(C), pages 167-177.
    16. Holzmann, Patrick & Breitenecker, Robert J. & Schwarz, Erich J. & Gregori, Patrick, 2020. "Business model design for novel technologies in nascent industries: An investigation of 3D printing service providers," Technological Forecasting and Social Change, Elsevier, vol. 159(C).
    17. Zhang, Ziyu & Ding, Tao & Zhou, Quan & Sun, Yuge & Qu, Ming & Zeng, Ziyu & Ju, Yuntao & Li, Li & Wang, Kang & Chi, Fangde, 2021. "A review of technologies and applications on versatile energy storage systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 148(C).
    18. Raijmakers, L.H.J. & Danilov, D.L. & Eichel, R.-A. & Notten, P.H.L., 2019. "A review on various temperature-indication methods for Li-ion batteries," Applied Energy, Elsevier, vol. 240(C), pages 918-945.
    19. Chong, Lee Wai & Wong, Yee Wan & Rajkumar, Rajprasad Kumar & Rajkumar, Rajpartiban Kumar & Isa, Dino, 2016. "Hybrid energy storage systems and control strategies for stand-alone renewable energy power systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 66(C), pages 174-189.
    20. Rayna, Thierry & Striukova, Ludmila, 2021. "Assessing the effect of 3D printing technologies on entrepreneurship: An exploratory study," Technological Forecasting and Social Change, Elsevier, vol. 164(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:10:y:2018:i:12:p:4779-:d:190588. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.