IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v13y2020i5p1284-d330855.html
   My bibliography  Save this article

High Temperature Pyrolysis of Municipal Plastic Waste Using Me/Ni/ZSM-5 Catalysts: The Effect of Metal/Nickel Ratio

Author

Listed:
  • Mohammed Al-asadi

    (Institute of Chemical Engineering and Process Engineering, University of Pannonia, Egyetem utca 10, H-8200 Veszprém, Hungary)

  • Norbert Miskolczi

    (Institute of Chemical Engineering and Process Engineering, University of Pannonia, Egyetem utca 10, H-8200 Veszprém, Hungary)

Abstract

This work is dedicated to the high temperature pyrolysis of municipal plastic waste using Me/Ni/ZSM-5 catalysts. Catalysts were synthetized by wet impregnation. In addition to nickel, synthetic zeolite catalysts contain calcium, ceria, lanthanum, magnesia or manganese. Catalysts were prepared and tested using 0.1, 0.5 and 2.0 Me/Ni ratios. Catalyst morphology was investigated by SEM and surface analysis. Higher concentrations of second metals can block catalyst pore channels due to the more coke formation, which leads to smaller surface area. Furthermore, the chemicals used for the impregnation were among the catalyst grains, especially in case of 2.0 Me/Ni ratios. For pyrolysis, a horizontal tubular furnace reactor was used at 700 °C. The highest hydrogen and syngas yields were observed using ceria- and lanthanum-covered catalysts. The maximum production of syngas and hydrogen (69.8 and 49.2 mmol/g raw material) was found in the presence of Ce/Ni/ZSM-5 catalyst with a 0.5 Me/Ni ratio.

Suggested Citation

  • Mohammed Al-asadi & Norbert Miskolczi, 2020. "High Temperature Pyrolysis of Municipal Plastic Waste Using Me/Ni/ZSM-5 Catalysts: The Effect of Metal/Nickel Ratio," Energies, MDPI, vol. 13(5), pages 1-11, March.
    • Handle: RePEc:gam:jeners:v:13:y:2020:i:5:p:1284-:d:330855
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/13/5/1284/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/13/5/1284/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Khobragade, Murnal & Majhi, Sachchit & Pant, K.K., 2012. "Effect of K and CeO2 promoters on the activity of Co/SiO2 catalyst for liquid fuel production from syngas," Applied Energy, Elsevier, vol. 94(C), pages 385-394.
    2. Kunwar, Bidhya & Cheng, H.N. & Chandrashekaran, Sriram R & Sharma, Brajendra K, 2016. "Plastics to fuel: a review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 54(C), pages 421-428.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ying-Che Hung & Chien-Hua Ho & Liang-Yü Chen & Shih-Chieh Ma & Te-I Liu & Yi-Chen Shen, 2023. "Using a Low-Temperature Pyrolysis Device for Polymeric Waste to Implement a Distributed Energy System," Sustainability, MDPI, vol. 15(2), pages 1-15, January.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Anna Matuszewska & Adam Hańderek & Maciej Paczuski & Krzysztof Biernat, 2021. "Hydrocarbon Fractions from Thermolysis of Waste Plastics as Components of Engine Fuels," Energies, MDPI, vol. 14(21), pages 1-14, November.
    2. Rahimpour, Mohammad Reza & Jafari, Mitra & Iranshahi, Davood, 2013. "Progress in catalytic naphtha reforming process: A review," Applied Energy, Elsevier, vol. 109(C), pages 79-93.
    3. Anna Matuszewska & Marlena Owczuk & Krzysztof Biernat, 2022. "Current Trends in Waste Plastics’ Liquefaction into Fuel Fraction: A Review," Energies, MDPI, vol. 15(8), pages 1-32, April.
    4. Karol Tucki & Olga Orynycz & Andrzej Wasiak & Arkadiusz Gola & Leszek Mieszkalski, 2022. "Potential Routes to the Sustainability of the Food Packaging Industry," Sustainability, MDPI, vol. 14(7), pages 1-18, March.
    5. Lucía Quesada & Mónica Calero de Hoces & M. A. Martín-Lara & Germán Luzón & G. Blázquez, 2020. "Performance of Different Catalysts for the In Situ Cracking of the Oil-Waxes Obtained by the Pyrolysis of Polyethylene Film Waste," Sustainability, MDPI, vol. 12(13), pages 1-15, July.
    6. Burra, K.G. & Gupta, A.K., 2018. "Synergistic effects in steam gasification of combined biomass and plastic waste mixtures," Applied Energy, Elsevier, vol. 211(C), pages 230-236.
    7. Aditya Chidepatil & Prabhleen Bindra & Devyani Kulkarni & Mustafa Qazi & Meghana Kshirsagar & Krishnaswamy Sankaran, 2020. "From Trash to Cash: How Blockchain and Multi-Sensor-Driven Artificial Intelligence Can Transform Circular Economy of Plastic Waste?," Administrative Sciences, MDPI, vol. 10(2), pages 1-16, April.
    8. Hita, Idoia & Arabiourrutia, Miriam & Olazar, Martin & Bilbao, Javier & Arandes, José María & Castaño, Pedro, 2016. "Opportunities and barriers for producing high quality fuels from the pyrolysis of scrap tires," Renewable and Sustainable Energy Reviews, Elsevier, vol. 56(C), pages 745-759.
    9. Choi, Dongho & Jung, Sungyup & Lee, Sang Soo & Lin, Kun-Yi Andrew & Park, Young-Kwon & Kim, Hana & Tsang, Yiu Fai & Kwon, Eilhann E., 2021. "Leveraging carbon dioxide to control the H2/CO ratio in catalytic pyrolysis of fishing net waste," Renewable and Sustainable Energy Reviews, Elsevier, vol. 138(C).
    10. Burra, Kiran Raj G. & Liu, Xuan & Wang, Zhiwei & Li, Jinhu & Che, Defu & Gupta, Ashwani K., 2021. "Quantifying the sources of synergistic effects in co-pyrolysis of pinewood and polystyrene," Applied Energy, Elsevier, vol. 302(C).
    11. Lopez, Gartzen & Artetxe, Maite & Amutio, Maider & Bilbao, Javier & Olazar, Martin, 2017. "Thermochemical routes for the valorization of waste polyolefinic plastics to produce fuels and chemicals. A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 73(C), pages 346-368.
    12. Zhang, Yayun & Duan, Dengle & Lei, Hanwu & Villota, Elmar & Ruan, Roger, 2019. "Jet fuel production from waste plastics via catalytic pyrolysis with activated carbons," Applied Energy, Elsevier, vol. 251(C), pages 1-1.
    13. Natacha Phetyim & Sommai Pivsa-Art, 2018. "Prototype Co-Pyrolysis of Used Lubricant Oil and Mixed Plastic Waste to Produce a Diesel-Like Fuel," Energies, MDPI, vol. 11(11), pages 1-11, November.
    14. Chidambarampadmavathy, Karthigeyan & Karthikeyan, Obulisamy Parthiba & Heimann, Kirsten, 2017. "Sustainable bio-plastic production through landfill methane recycling," Renewable and Sustainable Energy Reviews, Elsevier, vol. 71(C), pages 555-562.
    15. Kunwar, Bidhya & Moser, Bryan R. & Chandrasekaran, Sriraam R. & Rajagopalan, Nandakishore & Sharma, Brajendra K., 2016. "Catalytic and thermal depolymerization of low value post-consumer high density polyethylene plastic," Energy, Elsevier, vol. 111(C), pages 884-892.
    16. Sultan Majed Al-Salem & Yang Yang & Jiawei Wang & Gary Anthony Leeke, 2020. "Pyro-Oil and Wax Recovery from Reclaimed Plastic Waste in a Continuous Auger Pyrolysis Reactor," Energies, MDPI, vol. 13(8), pages 1-10, April.
    17. Rahman, Md Hafizur & Bhoi, Prakashbhai R. & Menezes, Pradeep L., 2023. "Pyrolysis of waste plastics into fuels and chemicals: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 188(C).
    18. Dong, Ruikun & Zhao, Mengzhen, 2018. "Research on the pyrolysis process of crumb tire rubber in waste cooking oil," Renewable Energy, Elsevier, vol. 125(C), pages 557-567.
    19. Park, Ki-Bum & Choi, Min-Jun & Chae, Da-Yeong & Jung, Jaeheum & Kim, Joo-Sik, 2022. "Separate two-step and continuous two-stage pyrolysis of a waste plastic mixture to produce a chlorine-depleted oil," Energy, Elsevier, vol. 244(PA).
    20. Das, Amar Kumar & Sahu, Santosh Kumar & Panda, Achyut Kumar, 2022. "Current status and prospects of alternate liquid transportation fuels in compression ignition engines: A critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 161(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:13:y:2020:i:5:p:1284-:d:330855. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.